Mainly (one of the following circumstances)

(1) Reach the standard class hours specified in the formal primary training of this occupation, and obtain the graduation (completion) certificate.

(2) Engaged in this vocational training for more than 2 years.

(3) The professional apprenticeship expires.

Intermediate (one of the following)

(1) After obtaining the primary vocational qualification certificate of this occupation, he has been engaged in this occupation for more than 3 years continuously, and has reached the required standard hours after the formal training of this occupation intermediate, and obtained the graduation (completion) certificate.

(2) Having worked in this occupation for more than 5 years after obtaining the primary vocational qualification certificate of this occupation.

(3) Engaged in this occupation for more than 7 years.

(4) Obtain the vocational (professional) graduation certificate of the secondary vocational school with intermediate skills as the training goal, which is verified by the administrative department of labor security.

Extended data

The examination is divided into theoretical knowledge examination and skill operation examination. The theoretical knowledge test adopts the closed-book written test method, and the skill operation test adopts the on-site practical operation method. Both the theoretical knowledge test and the skill operation test adopt the 100 scoring system, and the score above 60 is qualified. The appraisal of technicians and senior technicians must be comprehensively reviewed.

Before starting work; You must complete the following tasks:

1, whether the appearance of bed equipment mechanism is in good condition. (Shift handle, protective equipment)

If there is no abnormality: drive at a low speed 1-2 minutes. See if it works properly. Winter is more important. If there is any fault, notify the leader and maintenance application.

2. Check all oil filler holes and lubricate them.

3, familiar with drawings and technology and put them in a convenient position. Don't get dirty. If you find problems with drawings and processes, report them to the relevant personnel, and you can't change them yourself.

4, check whether the tools and fixtures are complete, with or without exception.

5. Check whether the blank machining and allowance are defective.

Baidu encyclopedia-lathe worker