Evaluation conditions of intermediate engineers

Basic conditions for evaluation of intermediate engineers:

I. Education and qualifications

The applicant shall meet one of the following conditions:

1, PhD student;

2. After graduating from a master's degree, he has been engaged in professional work for 3 years;

3. After graduating from undergraduate course, he has been engaged in professional work for 5 years;

4, after graduating from college, engaged in professional work for 7 years;

5. After graduating from college or above, he has obtained the professional and technical qualification (post) of assistant division level for 4 years;

6. 1982 Obtained secondary school education before the end of the year, and engaged in reporting professional work for over 15 years.

Second, foreign language proficiency conditions

Applicants must hold the national foreign language grade B professional title certificate obtained in 2000 and later, and the qualified results of the year or the notice of foreign language grade. Those who joined the work before the end of 1977 and scored 45 points or above in the foreign language grade examination for professional titles in 2004 and later can declare. Persons who meet one of the following conditions may be exempted from the test:

1, college degree or above in foreign languages;

2. Get a master's degree or above;

3. Have the corresponding study abroad experience recognized by the state (the study abroad experience must be recognized by the Chinese embassy in the country and issued by the returned overseas students, or certified by the study abroad service center of the Ministry of Education);

4. Published foreign language monographs and translated works ("foreign language monographs and translated works" refer to works (including technical works) written and translated in foreign languages by myself independently or as the main translator, which are official publications);

5. Engaged in professional and technical work in grass-roots units below the township level ("grass-roots units below the township level" refers to grass-roots units directly under the township level or under its jurisdiction);

6. Take the foreign language examination for the candidates of BFT training, and pass the first level.

Three, the computer application ability conditions

Anyone born on or after June 1 960 65438+1October1should take the computer application proficiency test for professional technicians in Beijing or the national computer application proficiency test for professional technicians and obtain the qualification certificates of three modules. Persons who meet one of the following conditions may be exempted from the test:

1, college degree or above in computer science and technology (including computer and application, computer software, computer science education, software engineering, computer devices and equipment, computer information management, computer network);

2. Get a master's degree or above;

3, to participate in the national computer software professional and technical qualification examination to obtain a programmer or above qualification certificate.

Note: The titles of junior, intermediate and senior in engineering series are called assistant engineer, engineer, senior engineer and special engineer respectively, but there is no such thing as intermediate engineer, and the word "intermediate" is usually added, because the word "engineer" is already rampant. The accurate title should be intermediate title.

(1) Extended reading of evaluation conditions for titles of intermediate structural engineers;

List of application materials for intermediate engineer evaluation:

1, professional and technical post evaluation form (in duplicate for juniors and juniors) and attachment form (in duplicate); The main performance column in the front form should be filled in in detail.

2, last year's "professional and technical personnel assessment registration form".

3, professional papers and business work summary.

4. Submit the original graduation certificate and junior professional title certificate.

5, the need for professional and technical personnel level ability test certificate.

6. Other relevant materials that can reflect my work ability and important performance.

7. Six one-inch color photos and two copies of ID card and diploma.

Note: Anyone who fails to prepare relevant materials according to the above requirements will not be accepted.

Two opinions on the qualification of intermediate engineer

The qualification conditions for evaluating intermediate engineers are as follows:

(1), graduated from university with the title of assistant engineer, and worked as an assistant engineer for more than 4 years or as a professional and technical worker for more than 5 years after graduation;

(2) Having obtained the title of assistant engineer after graduating from college, and having worked as an assistant engineer for more than 4 years or engaged in professional and technical work for more than 7 years after graduating from college;

Do not have the required academic qualifications, but have genuine talents and outstanding achievements, and meet one of the following conditions, you can declare an exception:

(1), graduated from technical secondary school, has been engaged in this professional and technical work continuously for more than 10 years or accumulated in this professional and technical work for more than 15 years, and has obtained the title of assistant and worked as an assistant for more than 5 years.

(2), won the second prize of municipal scientific and technological progress (corresponding award) above.

(3), the main technical person in charge of enterprises and institutions, do not have the required academic qualifications, participate in relevant professional training recognized by the Municipal Office of Professional Titles, obtain a qualified certificate after examination, have been engaged in professional and technical work for more than 0/5 years, and have obtained the title of assistant for more than 5 years.

(4) The technical backbones of enterprises and township agricultural institutions do not have the required academic qualifications, have obtained the college professional certificate of this major or related majors recognized by the Municipal Professional Title Office, have been engaged in this professional technical work for more than 15 years, and have obtained the assistant title for more than 5 years.

(5) After graduating from technical secondary school, he has been engaged in professional and technical work for more than 15 years.

To apply for professional and technical qualifications, a prescribed academic certificate shall be issued. Professional certificates and other relevant certificates are not used as academic basis for declaration and evaluation.

To obtain the corresponding foreign academic qualifications and degrees, it is necessary to provide the certification certificate of foreign academic qualifications and degrees of the Ministry of Education before the professional and technical qualifications can be assessed according to the corresponding academic qualifications and degrees.

Those who have obtained the required academic qualifications after joining the work first can add up the service time before and after obtaining the academic qualifications, and those who meet the service time requirements can apply for a higher professional and technical qualification.

(2) Extended reading of evaluation conditions for titles of intermediate structural engineers.

Declaration conditions

introduce

1, education and qualification requirements

The applicant shall meet one of the following conditions:

(1) Ph.D. graduate;

(2) After graduating from a master's degree, he has been engaged in professional work for 2 years;

(3) After graduation, he has been engaged in reporting professional work for 5 years;

(4) After graduating from a college, he has been engaged in professional work for 7 years;

(5) After graduating from college or above, he has obtained the professional and technical qualification (post) of assistant division level for 4 years;

(6) 1982 has obtained secondary school education before the end of the year, and has been engaged in reporting professional work for over 15 years.

2. Foreign language requirements

Applicants must hold the national foreign language grade B professional title certificate obtained in 2000 and later, and the qualified results of the year or the notice of foreign language grade. Those who joined the work before the end of 1977 and scored 45 points or above in the foreign language grade examination for professional titles in 2004 and later can declare. Persons who meet one of the following conditions may be exempted from the test:

(1) College degree or above in foreign language major;

(2) obtain a master's degree or above;

(3) Have the corresponding study abroad experience recognized by the state (the study abroad experience must be recognized by the Chinese embassy in the country and issued with the certificate of returned overseas students, or certified by the Study Abroad Service Center of the Ministry of Education);

(4) Published foreign language monographs and translated works ("foreign language monographs and translated works" refer to works (including technical works) written in foreign languages by myself or as the main translator, which are official publications);

(five) to engage in professional and technical work in grass-roots units below the township level ("grass-roots units below the township level" refers to grass-roots units directly under the township level or under its jurisdiction);

(6) Take the Foreign Language Examination (BFT) for overseas training candidates of national industrial and commercial enterprises, and pass Level 1;

3, computer application level (ability) requirements

Anyone born on or after June 1 960 65438+1October1should take the computer application proficiency test for professional technicians in Beijing or the national computer application proficiency test for professional technicians and obtain the qualification certificates of three modules. Persons who meet one of the following conditions may be exempted from the test:

(1) College degree or above in computer science and technology (including computer and application, computer software, computer science education, software engineering, computer devices and equipment, computer information management, computer network);

(2) obtain a master's degree or above;

(3) to participate in the national computer software professional and technical qualification examination and obtain the qualification certificate of programmer or above.

4. Professional knowledge requirements

According to the spirit of the Notice of Beijing Municipal Bureau of Human Resources and Social Security on the Work Arrangement of 20 1 1 year title evaluation (JYF), the intermediate professional and technical qualifications of engineering technology series are determined by combining examination and evaluation. Those who apply for the professional and technical qualifications of five professional engineers, namely, civil construction, road and bridge construction, water supply construction, decoration construction and public equipment installation, must obtain the national first-class constructor qualification examination certificate or the qualified scores of the subject "Professional Engineering Management and Practice" two years before obtaining the national first-class constructor qualification (2009 or 20 10) (professional is not limited).

Requirements for declaration of intermediate titles

(1) graduated from university, engaged in professional and technical work for more than five years, and worked as an assistant for more than four years.

(2) graduated from a college, engaged in professional and technical work for more than six years and served as an assistant for more than four years.

(3) graduated from secondary school (high school), engaged in professional and technical work for more than ten years, and served as a teaching assistant for more than four years.

(4) junior high school education or below, must be engaged in professional and technical work for more than fifteen years and served as a teaching assistant for more than four years.

List of application materials

1. professional and technical post evaluation form (in duplicate for juniors and seniors) and attachment form (in duplicate); The main performance column in the front form should be filled in in detail.

2 last year's "professional and technical personnel assessment registration form".

3. Professional papers and business work summary.

Professional paper requirements

(1) Be sure to write it yourself, and don't copy it.

(2) to combine my work and post reality.

(3) The number of words shall not be less than 3,000.

Business work summary requirements

(1) Write your work experience clearly.

(2) Write clearly the main projects that you are responsible for or participate in.

(3) indicate the published papers or major achievements and awards.

(4) The number of words shall not be less than 1500.

4. Submit the original graduation certificate and junior professional title certificate.

5 "Professional and technical personnel level ability test certificate".

6. Other relevant materials that can reflect my work ability and important performance.

7. Six one-inch color photos and two copies of ID card and diploma.

Those who fail to prepare relevant materials according to the above requirements will not be accepted.

Professional classification

Engineer classification: environmental engineering, civil construction, civil structure, civil supervision, civil engineering, rock engineering, geotechnical engineering, landscape architecture, horticulture, landscape architecture, landscaping, ancient architecture, civil engineering, civil engineering installation, architecture, building management, architectural engineering, architectural design, architectural decoration and construction. Electronic information, electronic system, electricity, electrical engineering, electrical equipment, electrical automation, industrial automation, refrigeration and air conditioning maintenance, HVAC installation, corrosion and protection, thermal power, electromechanical, electromechanical engineering, electromechanical integration, photoelectric technology, chemical industry, chemical machinery, mechanical manufacturing, mechanical design and manufacturing, mechanical electromechanical, automobile maintenance, equipment installation, water conservancy, water conservancy. Boiler, kiln, road and bridge, road and bridge construction, road and bridge, tunnel engineering, computer technology, computer and its application, municipal, municipal road engineering, building budget, budget, structure, structural design, communication, safety, cost, lecturer, statistician, underground engineering and tunnel engineering technology, etc.

Economics: accounting, economic statistics and other majors.

Economic management, industrial and commercial enterprise management, marketing, labor wages, agricultural economy, transportation economy, finance and taxation.

Electromechanical category: major in electromechanical boiler equipment installation, water conservancy, electric power, electrical electronics, etc.

What are the evaluation conditions for three intermediate titles?

Intermediate title evaluation conditions:

(1) graduated from university, engaged in professional and technical work for more than five years, and worked as an assistant for more than four years.

(2) graduated from college, engaged in professional and technical work for more than six years and served as a teaching assistant for more than four years.

(3) graduated from secondary school (high school), engaged in professional and technical work for more than ten years, and served as a teaching assistant for more than four years.

(4) People with junior high school education or below must be engaged in professional and technical work for more than fifteen years and hold assistant positions for more than four years.

How to evaluate the title of structural engineer

Engaged in professional and technical work after graduation 1 year or more. Engaged in professional and technical work for more than 2 years after graduating from college. Engaged in professional and technical work for more than 4 years after graduating from technical secondary school.

The main technical completion person or participant of the project who won the third prize of scientific and technological achievements at or above the county level. Participate in the design, construction, installation, debugging and related technical work of 1 medium-sized or two small-sized technical transformation projects. Participate in the research and development of new products of enterprises and obtain good economic benefits.

At present, the evaluation time of structural junior titles (assistant engineers) is every 1-2 months. If you need an assistant engineer's evaluation, please provide complete relevant information to Chen Hui Education in our school in time.

We will arrange the title evaluation at the latest time for junior titles (assistant engineers), and the assistant engineer certificate will be issued about 1 month after the title evaluation time for assistant engineers.

What are the evaluation conditions for the intermediate title of construction engineer?

Which province are you from?

20 19 Anhui Provincial Department of Human Resources and Social Security released the latest review document:

To declare an intermediate engineer shall meet the following conditions:

(a) to master the professional basic theoretical knowledge and professional technical knowledge, familiar with the professional technical standards and norms, to understand the status quo and development trend of new technologies, new processes, new equipment and new materials.

(two) to be able to independently undertake more complicated professional and technical work, solve more complicated technical problems within the scope of this major, and have certain technical research capabilities.

(3) Having a master's degree or a master's degree, having been engaged in professional and technical work for two years after obtaining an assistant engineer or corresponding professional qualification; Or have a bachelor's degree or a college degree, and have been engaged in professional and technical work for 4 years after obtaining an assistant engineer or corresponding professional qualification; Or have a secondary professional school education, and have been engaged in professional and technical work for 5 years after obtaining an assistant engineer or corresponding professional qualification.

(4) After taking the post of assistant engineer or obtaining the corresponding professional qualification, the performance meets one of the following conditions: 1. Obtained 1 invention patents or 2 utility model patents in the professional field, which have been developed and implemented and achieved certain economic or social benefits; 2. Participate in the completion of 1 municipal engineering projects related to this major, or participate in the completion of 2 projects such as scientific research, scientific and technological development and achievement transformation, technological innovation and technological transformation of this unit, which have been evaluated by a third party or passed the acceptance; 3. Participate in compiling 1 technical standards, technical specifications and construction methods. , or two enterprise standards that have been promulgated and implemented.

(5) Write three professional project reports, engineering plans and design documents independently, or publish academic papers related to this major 1 article publicly. The results should reflect certain technical research ability and have obvious effects on solving technical problems.

What information should I prepare to declare the intermediate title of engineering?

1. The application form for intermediate engineer is paper. electronic document

2. One paper and one electronic document of the professional and technical post qualification evaluation form.

3. Original and scanned ID card.

4. Copy and scanned copy of the highest academic certificate.

5. Two 1 inch and 2-inch photos with blue background and one electronic document.

6 copies and scanned copies of the certificate of junior engineer obtained.

7. If you have obtained professional title English and professional title computer certificate, you need to provide a copy and scanned copy of professional title English and professional title computer certificate.

8. Copies and scanned copies of other relevant professional qualifications, professional qualifications, professional qualifications and relevant post certificates (helpful for extra points).

9. Copies and scanned copies of project achievements, relevant awards, honors and relevant post certificates obtained during the on-the-job period (helpful for evaluation and scoring).

10. 2 professional papers, about 3,000 words, no need to publish, 3 copies in paper, electronic file 1 copy.

1 1. Three reports of over 3,000 words in recent years, one in electronic form.

Specifically, you can be personal.

Evaluation conditions for intermediate titles of six-level structure specialty

Hello, assistant engineer is a junior professional title. According to the provisions of the evaluation of intermediate titles, need to meet one of the following conditions:

(1) graduated from university, engaged in professional and technical work for more than five years, and worked as an assistant for more than four years.

(2) graduated from college, engaged in professional and technical work for more than six years and served as a teaching assistant for more than four years.

(3) graduated from secondary school (high school), engaged in professional and technical work for more than ten years, and served as a teaching assistant for more than four years.

(4) People with junior high school education or below must be engaged in professional and technical work for more than fifteen years and hold assistant positions for more than four years.

And you need to take the professional title English and professional title computer exams. (National Education at Your Service)

What are the evaluation requirements for intermediate engineers?

You can come here for free. National sources can be used.

Class I (1) Registered Architect (300,000-320,000)/two years

Class I (Electrical) Registered Structural Engineer (400,000-420,000)/three years

Class II (words) registered architect 65438+ 10,000/two years.

Class II (1) Registered Structural Engineer 2 10000/ three years

Registered (8) electrical engineer (power generation, transmission, substation) 550,000 for three years.

Registered (9) electrical engineer (power supply and distribution) 450,000 times/three years.

Registered (8) public equipment engineer (HVAC) 400,000 times/three years.

Registered (8) public equipment engineer (water supply and drainage) for 420,000-450,000 times/three years.

Registered (9) public equipment engineer (electric power) 350,000 times/three years.

Registration (3) Civil Engineer (Geotechnical Engineering) (500,000) /3 years

Registered (3) Cost Engineer 50,000/1year

Registered (5) Supervision Engineer (Ministry of Construction) (50,000)/year

Registered (7) Urban Planning Engineer 200,000 /3 years

Professional title (certificate)

Intermediate (0) Title: 5000-7000/ year

Eight intermediate engineer title evaluation conditions

Basic conditions for evaluating intermediate titles:

1, get a doctorate and pass the examination;

2. Get a master's degree or a second bachelor's degree and have worked as an assistant engineer for about two years;

3. Obtain a bachelor's degree or graduate from a university, and have worked as an assistant engineer for more than four years;

Graduated from junior college and worked as an assistant engineer for more than five years.

The evaluation of intermediate title refers to the title of intermediate engineer, and the title of intermediate economist is obtained through separate examination without evaluation by expert Committee.

The titles of junior, intermediate and senior in engineering series are called assistant engineer, engineer, senior engineer and super engineer respectively, but there is no such thing as intermediate engineer, but the word "intermediate" is usually added because the word "engineer" has always been called flood. The accurate title should be intermediate title.

Those who apply for promotion to junior professional and technical positions in non-public economic organizations must participate in the level and ability test of the unified organization of the whole city, and those who pass the test can declare the corresponding level of qualifications. The level and ability test shall be the responsibility of the Municipal Vocational Reform Office, and the specific work shall be entrusted to the Municipal Talent Exchange Center for organization and implementation.

9. Evaluation conditions for intermediate titles of buildings

Intermediate title evaluation conditions:

(1) graduated from university, engaged in professional and technical work for more than five years, and served as assistant title for more than four years.

(2) graduated from college, engaged in professional and technical work for more than six years, and served as an assistant title for more than four years.

(3) graduated from secondary school (high school), engaged in professional and technical work for more than ten years, and served as an assistant title for more than four years.

(4) People with junior high school education or below must be engaged in professional and technical work for more than fifteen years and have served as assistant titles for more than four years.

engineer

(1) Engaged in engineering and technical work after graduation from high school (non-technical secondary school) and technical secondary school 12 and 8 years respectively, and obtained assistant engineer for more than 4 years; Engaged in engineering and technical work for 4 years and 2 years respectively after graduation from junior college and undergraduate course, and obtained the qualification of assistant engineer for more than 2 years; Non-professional junior college and undergraduate have been engaged in engineering and technical work for 6 years and 4 years respectively, and have obtained the qualification of assistant engineer for 4 years and 3 years respectively. Engaged in engineering and technical work for 5 years, 4 years and 3 years after obtaining secondary school, junior college and undergraduate degree, and the accumulated professional working years have met the above requirements respectively;

(2) Have the ability to independently undertake engineering and technical work or management work, and be able to solve complex technical problems of this major;

(3) Know how to plan, budget and design;

(4) Outstanding technical level, product quality and economic benefits;

(5) Comprehensive professional theoretical knowledge, able to write high-quality professional papers.

(9) Intermediate structural engineer title evaluation conditions extended reading:

1, assistant engineer (junior title): engaged in this work for more than one year after graduating from junior college; Engaged in the professional work for more than two years after graduating from university; Graduated from technical secondary school and engaged in professional and technical work for more than three years. Graduated from high school and engaged in professional and technical work for more than seven years. People with junior high school education or below have been engaged in professional and technical work for more than ten years, and should also have rank positions.

2. Engineer and economist (intermediate title): graduated from university, engaged in professional and technical work for more than five years, and served as assistant for more than four years. Graduated from college, engaged in professional and technical work for more than six years, and served as an assistant for more than four years. Graduated from technical secondary school (high school), engaged in professional and technical work for more than ten years, and served as an assistant for more than four years. People with junior high school education or below must be engaged in professional and technical work for more than fifteen years and hold assistant positions for more than four years.

3. Senior engineer (senior title): After graduating from university, he has been engaged in this professional and technical work 10 for more than 0 years, obtained the qualification for intermediate positions, and has been engaged in intermediate positions for more than 5 years; Graduated from college, engaged in professional and technical work for more than fifteen years, and served as an intermediate title position for more than five years; Graduated from secondary school and high school, engaged in professional and technical work for more than 20 years, and served as an intermediate title position for more than 5 years. These are the hardware points when evaluating senior professional titles.

The next step is software grading, including papers, works, scientific research achievements, various awards, honors and so on. The grades are different, and the scores of the first and second authors are different, depending on your regulations. The software and hardware are sufficient. After the English and computer titles are qualified, you can fill in the title declaration form, submit it to the personnel department for review, and finally take the professional examination. After passing, it can be evaluated. You can make an exception.

Ten Guangzhou intermediate engineer title evaluation conditions

You can't apply for an intermediate engineer if you haven't obtained a work permit for a long time. After graduating from a university, the conditions for evaluating the title of intermediate engineer are as follows: after holding the certificate of assistant engineer, he has been engaged in relevant technical work for 4 years. Other qualifications are as follows:

Continuing education required 72 hours in that year. If you want to finish all the classes at once, you can take a look at this green channel for applying for intermediate engineers in Guangzhou.