1, [Vehicle Engineering] Noise Simulation Calculation of Automobile Exhaust System
Abstract. 22:2 1 107520 directory. Document July 3, 2008 at 22: 2 ...
Category: Graduation thesis size: 1.4 1 MB Date: July 22, 2008.
2. [Vehicle Engineering] Development of 3D demonstration module of automobile rollover accident based on OpenGL.
Car accidents are often accompanied by rollover. Car rollover is a complex three-dimensional process, which is difficult to analyze and reproduce. The road traffic accident reappearance analysis system (RTA-RAS) developed by our laboratory is still unable to deal with the accidents involving vehicle rollover. This paper has played a role in practice. ...
Category: Graduation thesis size: 8.77 MB Date: August 24, 2007
3. [Vehicle Engineering] Establishment of vehicle rollover accident reappearance model.
Car rollover accident is a complicated form of road traffic accident, which often causes huge casualties and property losses. In the road traffic accident reappearance analysis system RTA-RAS, it is necessary to realize the analysis module of automobile rollover accident. This paper draws lessons from the research methods and experimental data of rollover accidents abroad. ...
Category: Graduation thesis size: 5. 1 MB Date: August 24, 2007.
4. [Vehicle Engineering] Study the human body injury and its source in the car caused by traffic accidents.
Based on the theories of traffic traumatology, forensic medicine, ergonomics and accident reappearance analysis, this paper analyzes and studies the human body injury in the car caused by traffic accidents and its sources through macro data statistics and in-depth data analysis, and explores the contact mode, injury mechanism and injury source. ...
Category: Graduation thesis size: 3.05 MB Date: August 24, 2007
5. [Vehicle Engineering] Development of tire characteristic identification analysis simulation software based on database.
This paper mainly introduces a set of software based on database technology and with UniTire model as the core, which is used for tire test data management, characteristic parameter identification, report generation, test analysis and model simulation application. This paper focuses on the creation of two modules: report generation and dynamic simulation. ...
Category: Graduation thesis size: 2.77 MB Date: August 22, 2007
6. Computer aided design of leaf spring of automobile suspension.
Suspension system is one of the important automobile assemblies, and its main task is to transmit all forces and moments acting between the wheel and the frame, reduce the impact load transmitted by the road surface to the car body, attenuate the vibration, and ensure the ride comfort and handling stability. Leaf spring is a suspension system, because the steel structure ...
Category: graduation thesis size: 55 1 KB date: 2007-08- 18.
7. [Vehicle Engineering] Design of automobile magnetorheological shock absorber
With the improvement of people's living standards, higher requirements are put forward for the comfort and handling stability of automobiles, and the automobile suspension is developing towards intelligence. Fully active suspension has good performance, but it consumes high energy and is complicated to manufacture. Semi-active suspension and fully active suspension have similar performance. Magnetorheological shock absorber as semi-active suspension ...
Category: graduation thesis size: 1. 16 MB date: 2007-08- 18.
8. Improved design of electric scooter hub motor [vehicle engineering] (3D model+engineering drawing+opening report+ppt)
With the rapid advancement of social population aging, the number of elderly people is increasing, and the corresponding elderly products are also growing rapidly. As an innovative product, electric scooter provides comfortable transportation for the elderly and has broad market prospects. Therefore, research and development of power generation. ...
Category: Graduation design size: 5.38 MB Date: 2007-08- 18
9.[ Vehicle Engineering] Transient response and fatigue life analysis of crankshaft of ]3D9 reciprocating pump
Abstract: A three-dimensional model of crankshaft system of 3D9 reciprocating pump is established. A three-dimensional model of crankshaft is established. Three-dimensional simplified models of connecting rod, bearing and plunger are established. Based on the established three-dimensional model, the finite element mesh of crankshaft system is divided. Considering the accuracy of calculation, the element is adopted. ...
Category: Graduation thesis size: 4.33 MB Date: August 2007-18.
10, [Vehicle Engineering] Vehicle Dynamic Simulation Calculation
The dynamic performance of automobile is one of its important performances, which directly affects its commercialization. The computer simulation method provides a fast, accurate and effective tool for automobile dynamic performance prediction, and eliminates the influence of drivers, road environment, climate and other factors on automobile performance measurement in real vehicle road test. have ability ...
Category: Graduation thesis size: 860 KB Date: June 23, 2007
/soft/search.asp？ Act = Topic & ampclassid = 20& keywords =% B3% b5% c1%be% B9% a4% B3% cc.