The daily fuel tank anywhere is supplied by gravity or electric pump. The electric pump of long-distance large oil tank should be equipped with a valve to automatically cut off sudden fire. The material inside the fire extinguisher must be foam, which can be directly used by the pump or fire box; Fire extinguishers should always be placed near diesel generator sets and fuel depots.
The fire between oil and electricity is very dangerous, and there are few types of fire extinguishers suitable. In this case, we suggest using BCF, carbon dioxide or powder desiccant; Asbestos blanket is also a useful fire extinguishing substance. Foamed rubber can also put out oil fires far away from electrical equipment. Always keep the oil drain clean to prevent oil from overflowing. We suggest placing small-particle mineral absorbent around the site, but fine-particle sand should not be used.
However, like these absorbents, they also absorb water, which is dangerous where there is electricity, and so are abrasives. They should be placed separately from fire-fighting equipment, and the staff should pay attention to the fact that absorbents and abrasives cannot be used on diesel generator sets or combined power distribution equipment. Cooling air can flow around the desiccant. Therefore, before starting the diesel generator set, the desiccant should be cleaned or removed as much as possible.
When there is a fire in the engine room of diesel generator set, in some places, laws and regulations stipulate that it is necessary to stop the operation of diesel generator set remotely and urgently to eliminate the circuit leakage during the engine room fire.
These fire safety measures can ensure the safety of operation and personal safety, and prevent accidents from causing unnecessary losses. Of course, these details must be paid attention to when setting up the computer room.