Wang, Li, Zhao, Ye. Basic characteristics of atmospheric pressure RF plasma jet. Chinese Physics. 13 (2004) 190.
[3] Wang Shouguo, "Introduction of Atmospheric Pressure RF Cold Plasma Cleaning Technology", cleaning world, Vol.20, No.2 (2004)32.
[4] Xu Xiangyu, Wang Shouguo, "Study on the Treatment of Wool Fabric by Atmospheric Pressure and Low Temperature Ar/O2 Plasma", Proceedings of the 4th Symposium on Functional Textiles and Nanotechnology (2004)304.
[5] Wang Shouguo, "Study on the Treatment of Wool Fabric by Atmospheric Cold Plasma", the 4th National Technical Exchange Conference on New Materials, New Technologies, New Processes and New Products in Printing and Dyeing Industry (2004)2 10.
Li Haijiang, Wang Shouguo, et al., "Study on Cleaning Photoresist by Atmospheric Pressure RF Cold Plasma", Semiconductor Technology, 29(2004)264.
[7] Xu Xiangyu, Wang Souguo, "Surface Modification of Polyester Film by Glow Discharge Tunneling at Atmospheric Pressure". Feifei. Metal society. China, 14 (2004) 459.
[8] Li Xingjiang and Wang Shusheng. Study on atmospheric pressure plasma jet and its application in photoresist etching. And technology. , 6(2004)248 1.
Zhao,,, et al. Journal of Semiconductor, 26 (2005)6 13.
[10] Zhao, "application of atmospheric pressure cold plasma cleaning technology in microelectronics industry", cleaning world, vol. 2 14(2005)33.
[1 1] Wu, et al., "Study on killing microorganisms by atmospheric pressure and low temperature plasma", Acta Microbiologica, 45 (2005) 3 12.
[12] Wang Shouguo et al. , participated in 12 national plasma science and technology conference article: development of large-area dielectric barrier plasma power supply; "Atmospheric pressure RF cold plasma enhanced TEOS process for depositing silicon dioxide films"; "Study on Etching Silicon by Atmospheric Pressure RF Low Temperature Cold Plasma"; "Study on Surface Modification of Flat Panel Display by Atmospheric Pressure RF Cold Plasma" and "Preliminary Study on Application of Atmospheric Pressure Plasma in Microbial Pre-editing" (Donghua University, 2005).
[13] S. Wang, "Atmospheric Pressure Plasma Tunnel for Textile Treatment", 2nd International Symposium on Cold Atmospheric Pressure Plasma: Sources and Applications, Bruges, Belgium, (2005) 166.
[14] Wang Shouguo "Introduction of Atmospheric Pressure Plasma Device and Cleaning Technology" Semiconductor International Wafer Cleaning Conference (2005 Shanghai) 30.
[15] Wang Shouguo's Research Progress of Atmospheric Pressure Low Temperature Cold Plasma and Its Application in New Materials China (Ningbo) International Forum on New Materials and Industrialization (2006) 149.
Wang Shouguo. Introduction to the research progress of practical atmospheric pressure cold plasma technology, Proceedings of the 2006 Symposium on New Plastics Materials and Technologies in China, Japan, Korea and Taiwan (2006) 162.
[17] Zhang,, et al., Influence of Atmospheric Plasma Treatment on Wool Structure, Wool Spinning Technology,No. 1 Volume (2006)9.
[18] Zhao,, et al., "Introduction of processing equipment and technology of textile fabrics by atmospheric pressure plasma", Proceedings of the 6th Symposium on Functional Textiles and Nanotechnology (2006)3 13.
[19] Yan Xuefeng, Wang Shouguo, et al., "Exploratory experimental study on surface HD and VX plasma decontamination", National Defense Environmental Dynamics, No.2, 2006.
[20] Yan Xuefeng, Wang Shouguo et al., "Chemical disinfection in plasma disinfection room", 2006,No. 12.
[2 1] Xu Xiangyu, Wang Shouguo, et al. Effect of atmospheric argon plasma treatment on the surface properties of natural bamboo fiber. Surface and interface analysis 200638 (8)121-17.
Duan Xiaojin, et al. Temperature comparison of non-equilibrium atmospheric argon and helium plasma jets. Japanese Journal of Applied Physics, Vol.46, No.4A, (2007) 1700.
[23] Xie Yu, Wang Shusheng, et al. "Deposition of SiOx Thin Films by Capacitively Coupled Plasma at Atmospheric Pressure", Plasma Source Science. Technology, Vol.45, No.2, (2007) 372-376.
[24] Tang Jiuying, Chen,, Surface Modification of Fibers by Low Temperature Plasma, Synthetic Fiber Industry, No.3, 2007, P39-4 1.
[25] Jia Dongyi, Wang Shouguo, et al, "Study on Surface Modification and Adhesion of PTFE by Low Temperature Plasma", Acta Macropolymers, 2007.
[26], Zhao, et al. Novel atmospheric pressure uniform glow plasma etching photoresist. Japanese Journal of Applied Physics, Vol.46, No.8a, (2007)5294-5296.
[27] Zhao, et al., "Study on Etching Silicon by Atmospheric Pressure RF Ar/SF6 Plasma", Journal of Semiconductor, 28 (2007) 16 15.
Jia dongyi, zhong, Zhao, Surface Modification and Bonding of PTFE by Low Temperature Plasma, 2008,24 (5), Polymer Materials Science and Engineering.
[29] Yan Xuefeng, Wang Shouguo, Zhao Ling. Preliminary study on treatment of main chemical components of tobacco by Ar/O2 plasma, 2008,21(1), Journal of Wuhan Institute of Science and Technology.