I. Product introduction
The automatic protector for automobile safety (hereinafter referred to as protector) consists of intelligent infrared distance measuring active protector (hereinafter referred to as active protector) and collision energy consuming passive protector (hereinafter referred to as passive protector). The protection function of the system is divided into two levels. The first stage is the active protection realized by the active protector during driving, and the second stage is the passive protection realized by the passive protector when the vehicle collides. The protector has eight functions of automatic monitoring, automatic early warning, automatic deceleration, automatic braking, automatic flameout, buffering, energy consumption and data storage, which can effectively reduce the incidence of traffic accidents and protect the safety of people and vehicles to the maximum extent.
Compared with the traditional automobile safety protection device, the invention has the following advantages:
(1) The active protector detects the distance between the front obstacle and the vehicle through infrared rays (laser, radar, etc.). ), through the intelligent control system to analyze the danger, and then through the intelligent braking system to brake, so as to ensure the safety of people and vehicles.
(2) The active protector is an independent braking system directly connected with the brake pedal. Installing the protector does not change the structure of the original car and does not affect the braking system of the original car. It works by using a small amount of battery energy. The active protector automatically adjusts the early warning braking distance according to different vehicle speeds.
1, active protector and passive protector can be used separately.
2, the active protector is a multi-stage brake, and it is found that the judgment is faster than the normal reaction of people.
3. The automatic braking of the active protector is smooth, and there is no tail flick, U-turn and rollover.
4. Active protector When the vehicle enters the early warning distance or brakes automatically, the rear brake light will light up to remind the rear vehicle to pay attention.
5. Both manual and automatic cars can be installed.
6. The automatic braking distance is automatically adjusted by the intelligent system of the active protector according to the distance between the vehicle and the preceding vehicle and the vehicle speed.
7. Turn on the turn signal when overtaking or turning, and the function of the active protector will be automatically released. After the turn signal is reset, the active protector will resume working.
8. When the vehicle stops or runs, the active protector can be turned on or off at any time.
(3) Passive protectors include guardrails, bumpers, front slide plates, rear slide plates, quincunx-shaped energy dissipation bolts, springs, support plates and other components, which are divided into built-in and external types. When a vehicle collides at medium and high speed, the passive protector will start to eliminate and transfer the impact energy generated by the collision in about 0.05 seconds, which can instantly eliminate more than 90% of the collision energy and protect the safety of people and vehicles to the maximum extent.
(4) Innovative achievements
1, the protector includes active safety technology and passive safety technology, which fills the gap at home and abroad, and its comprehensive safety performance is in the international leading position.
2. Use infrared (laser, radar, etc.). The ranging computer control technology can realize the real-time measurement between the vehicle and the obstacle according to the driving speed and distance of the vehicle, automatically adjust the early warning braking distance, and give an alarm to slow down or command braking for the obstacle in front of the vehicle.
3. The invention has unique conception and novel analysis method. It has eight functions such as automatic monitoring, automatic early warning, automatic deceleration, automatic braking, automatic flameout, buffering, energy consumption and data storage. Compared with the automobile safety protection devices used at home and abroad at present, it has the characteristics of unique structure, reliable performance, low cost, economy, practicality and easy popularization.
4. Automatic braking function, flexible braking with ABS anti-lock braking system. This product passed 23 tests of National Automobile Testing Center (Xiangfan) on February 28th, 20th12nd. Jiangxi Provincial Bureau of Quality and Technical Supervision issued enterprise standards; 20 13 1 passed the appraisal of scientific and technological achievements of China high-tech association; 2065438+2003 65438+2003 passed the novelty retrieval of Hunan Science and Technology Information Center, and the novelty retrieval results showed that the technology was at the international leading level.
II. Resume of He Cai Liang
He, male, born in Yiyang, Hunan,1June, 953, is a famous inventor. 1In June, 988, research and development of automatic safety protectors for automobiles began. After 25 years of practice, the product is mature and has great promotion value. Personal honor:
1, 1997, obtained the utility model patent, with the patent name: auto safety automatic protector, patent number: ZL97208274.3；;
2. 1999 won the international gold medal for new products and technologies in Australia;
3. 1999 won the third international Einstein's highest gold medal and was received by Wu Yi, Minister of Commerce;
4. In 2000, he was awarded the title of "Talents of China in the 20th Century";
5.200 1 won the honors of "successful person of the century", "backbone of the Republic" and "outstanding person of China", and went to Beijing for many times to be received by the party and the state. Mr. Xu Jialu, Vice Chairman of the National People's Congress, took a group photo with Mr. Yang Weiguang, Director of CCTV.
6.200 1, and obtained the patent of utility model: automatic protector for automobile safety, ZL 00225135.3;
7. In 2002, he obtained the American invention patent, patent number: 603299, and patent name:
Auto automatic safety protector;
8. In 2006, the utility model patent was obtained: automobile collision energy dissipator, ZL2004 2 0069498.9；;
9. In 2007, he obtained the national invention patent: intelligent automobile safety protector, 2007 10034498.3, and successfully applied for PCT world patent protection, with the patent number PCT/CN2007/003238.
10, from 2006 to 20 12, served as the chairman and legal representative of Hunan Cai Liang automobile safety technology development co., ltd.
11.On September 4th, 2009, the product passed the inspection of Hunan Automobile and Motorcycle Product Quality Supervision and Inspection Center. The test results show that: (1) After installing the auto safety protector, the car can automatically brake and slow down when it is 2 1.5m away from the front car; (2) When overtaking, turn on the turn signal and the device will automatically stop working. (3) Through the simulation calculation of collision energy absorption, the energy absorption device absorbed more than 90% of collision energy during the collision.
12, passed the appraisal of Hunan Science and Technology Department on September 20th, 2009, and the appraisal results show that the overall technology of this achievement is at the international advanced level. It has good social and economic benefits and popularization and application value.
13, 2009 Chen Runer, secretary of Changsha Municipal Party Committee, personally gave instructions to support the industrialization of safety devices.
The products were inspected at 14 and 20 1 1 in Xiangfan, Hubei Province, respectively. This is the first inspection report of automotive automatic safety products.
15 and 20 12 obtained invention patents in July, with the name: a method for preventing rear-end collision with an automatic safety protector for automobiles; Patent No.20 12 1024933.9.
16, 20 13 served as the technical director of Jiangxi ruitai Cai Liang technology co., ltd.
Third, authoritative evaluation.
1 and 1998, a Chinese-American doctor majoring in mechanical engineering made a special trip to China to inspect He's patent samples. Mr. Li said: "At present, international car protection devices only pay attention to protecting people, not cars, but I don't know that protecting cars will protect people. He Cai Liang's invention protects people and cars, which is an amazing invention. "
2. On June 2, 2008 165438+ 10 12, Zhong Zhihua, an academician of China Academy of Engineering, an authoritative expert on automobiles and president of Hunan University, personally spoke highly of it: "It has filled the gap in the field of automobile safety at home and abroad". Academician Zhong enjoined Professor Gu Zhengqi, the project leader: "Don't test in Hunan University, because the credibility of athletes and referees is not enough. You should conduct the test in the State Key Laboratory. Then apply to the Ministry of Science and Technology for scientific and technological achievements appraisal, and then contact the automobile manufacturer for matching. Entering major domestic automobile manufacturers and entering the international market is our real goal. "
3. On July 20th, 2009, the authoritative automobile expert, Professor Huang from Hunan University, Professor Huang Wenzhen from Hunan University and Professor Huang Wenzhen from Manchester State University in the United States experienced the excellent performance of the protector in the test drive on Xiaoxiang Avenue in Changsha, and agreed that "it is safe and has done a good thing for mankind".
4.201212 On February 28th, the passive protector passed the inspection of the National Automobile Quality Supervision and Inspection Center (Xiangyang), and experts called it "the most advanced safety technology in the world".
Four. Member of the Expert Advisory Group
1, Zhong Zhihua
Academician of Chinese academy of engineering
2. Gu Yi
Vice President of Hunan University of Technology, doctoral supervisor of vehicle engineering in Hunan University.
3. Yang Yi
Professor of Hunan University, director of the State Key Laboratory of Advanced Design and Manufacture of Automobile Body of Hunan University.
4. Chen Quanshi
Tsinghua University is a doctoral supervisor, director of Tsinghua University Automobile Research Institute, deputy director of the State Key Laboratory of Automobile Safety and Energy Conservation, director of China Automotive Engineering Society, director of the Electric Vehicle Branch, deputy director of the National Automobile Standardization Electric Vehicle Professional Committee, and deputy director of the Urban Vehicle Expert Committee of the Ministry of Construction.
5. Meng Zhiqiang
Yiyang, Hunan, born in 1964, is a professor in the Department of Instrument Science of Hunan University, and has made great contributions to the research and development of automobile safety protectors.
6. Yin Qihua
Professor of Hunan University, director of Hunan Institute of Motor Vehicle Technology and Traffic Accident Appraisal, and an authoritative expert on automobiles.
7. Jiang Lehua
Professor, National University of Defense Technology, authoritative expert on automobiles.
8. Li Guoxi
Professor, National University of Defense Technology.
9. Wu
Yongzhou, Hunan, 1962, a professor at Changsha University of Science and Technology.
Jiang Wenjie 10
Ningxiang, Hunan, professor at National University of Defense Technology, photoelectric expert.
Wang Changjiang 1 1
Director (passive), Senior Engineer, Collision Laboratory, National Automobile Quality Supervision and Inspection Center (Xiangyang).
12, Chen Jixian
Director (director), senior engineer, testing laboratory of National Automobile Quality Supervision and Inspection Center (Xiangyang).
Five, important leaders personally instructed to support the industrialization of automobile safety protectors.
Zhu Rongji, Hu Jintao, Wu Yi, Zhou Bohua, Yang Weiguang and Chen Runer have given important instructions on the research and development and promotion of auto safety automatic protectors.
Chen Changzhi, founder of China automobile industry and vice chairman of the National People's Congress Standing Committee (NPCSC), Ye Shengji, deputy secretary general of China Automobile Industry Association, Fu, secretary general of China Automotive Engineering Society, and Fu Zhi, researcher of the Ministry of Transport, gave strong support.
The prospect of industrialization of intransitive verbs
(A) the traffic safety situation
At present, traffic accidents have become "the first harm in the world". According to the report of the World Health Organization, in 20 12 years, the number of traffic accident deaths exceeded1200,000, and the number of injured people exceeded 50 million. China is the country with the largest number of traffic accident deaths in the world, and the number of traffic accident deaths has exceeded 60,000 every year in the past decade.
Life first, safety first, how to protect the safety of people and cars as much as possible is a major issue that people all over the world are very concerned about. Automobile safety technology is the world's leading technology, and scientists all over the world are trying to explore and develop the safest car. It is of epoch-making significance to successfully develop an automatic protector for automobile safety.
(2) Market analysis
In 20 12 years, the number of cars in use in China exceeded1200,000, and it is expected to increase by more than 8 million every year in the next decade. The annual output of automobile manufacturers in various countries is nearly 20 million vehicles, accounting for about 1/4 of the global total output. It is the largest automobile manufacturer in the world and has great influence on the global automobile market.
Automobile safety protectors are fully qualified to become the standard configuration of automobiles. Vehicles equipped with automobile safety protectors can reduce the casualty probability by more than 90%. Promoting the use of automobile safety protectors can produce huge economic and social benefits, and the market prospect is very broad.
Brief introduction of Hunan liangzai intelligent electromechanical co., ltd.
Hunan Liangzai Intelligent Electromechanical Co., Ltd. was established in June 20 1 13 with a registered capital of100000 yuan. It mainly produces and sells automobile safety protectors and smart suitcases. The company is positioned as the parent company of the future group company, and Jiangxi ruitai Cai Liang Technology Co., Ltd. is an important production base of the company.
Company goal: to create a miracle of world security and be an angel of human peace.
Company tenet: serving the people.
Enterprise spirit: responsibility, honor and people's livelihood
On 201165438+1October 1-2, CCTV Channel 10 broadcasted a documentary about automobile safety protectors in four phases, which had a great impact.
China Automobile Industry Association, Ministry of Communications, Ministry of Science and Technology, National Development and Reform Commission and other ministries attach great importance to the industrialization of automatic automobile safety protectors, which will become the standard configuration of automobiles in the near future.