Security officer is not a position, most of them have no rank, he is just a role that is most directly engaged in safety management in the front line. The security officer's job is very hard. First, he must check and confirm all the places where there are risks. Second, he should often go deep into various production sites for inspection, find problems, and then coordinate and rectify.
In the actual production process, the work of safety personnel is very important. If we ignore the importance of this role, it will be difficult to ensure that production and business activities are carried out under safe conditions.
Although the role of safety officer seems to be "small", it is really not easy to do this role well because of the very high requirements for safety work. A qualified safety officer should at least have the following qualities and conditions:
First of all, there should be more extensive and solid safety knowledge.
Because safety personnel have to issue various permits in the process of production and maintenance, such as hot work permit, tank entry permit, power failure permit, climbing permit, parking permit, etc. The safety officer should have comprehensive and solid safety knowledge to meet various safety needs, such as mechanical safety, electrical safety, boiler and pressure vessel safety, welding safety, construction and chemical safety. Because if you lack some knowledge or have a solid grasp, the safety factor of the license will not be very high. Or even if the operator works under the premise of obtaining a license, the operation will still have high risks, so it is difficult to prevent casualties or property losses.
At the same time, the safety officer should also have a strong sense of safety legal system and master some common sense of safety laws and regulations. Because although any safety regulations have corresponding supervision departments, the real implementation and enforcement is still at the grassroots level, in the production line, so in a sense, safety officers may be the real enforcers of safety regulations. This requires safety personnel to at least understand and master the laws and regulations that should be implemented by the industry or department, which is the basis for implementing laws and regulations.
In a word, a qualified safety officer should have quite extensive and solid safety knowledge. Only in this way can we make a scientific and objective decision on a certain safety activity in actual safety work, or increase the safety of production practice activities, thus providing reliable safety guarantee for the development of enterprises.
Second, we must have a strong sense of responsibility and meticulous work style.
The sentence "Responsibility is more important than Mount Tai" is more suitable for safety officers, because all kinds of risky operations should be checked for safety, and scientific data should be provided through monitoring to provide safety guarantee for production. If you stop or stop production because it is unsafe, it will often bring greater economic losses and affect the safety and health of employees, so the safety officer should have a strong sense of responsibility for safety work. Moreover, because the unit entrusts this responsibility, the safety officer will become a "safety expert" in the minds of employees, and any work in risky places will be approved by the safety officer. When employees encounter such and such safety problems in production, they should ask the safety officer for advice, which requires the safety officer not to be sloppy in safety work. If he is careless or perfunctory, it is difficult to ensure production safety.
At the same time, safety personnel should be careful in their work. "Safety lies in caution, and accidents come from carelessness" illustrates this truth. In production or maintenance activities, the work style of the safety officer should be the most meticulous, because after the operators obtain the "license", they always push the safety responsibility to the safety officer in their consciousness. Although this idea is very wrong, the safety officer should consider all aspects of accident prevention as much as possible and take various effective preventive measures to nip in the bud.
Third, be good at collecting safety information.
Safety officers should be good at collecting safety information, including accident cases, new products of labor supplies, new knowledge of safety technology, development and progress of safety science at home and abroad, etc. With the development of media, access to information is more extensive, such as newspapers, radio, television, internet and so on. Only by constantly acquiring new knowledge and mastering a lot of safety information can safety work keep up with the development of society and meet the needs of society. At the same time, with a large amount of safety information, safety education will be more abundant and the level of safety management will be continuously improved.
Fourth, we must be hard-working and dedicated.
As mentioned above, the work of the safety officer is quite hard, which requires both mental work (often in a state of tension) and manual work (having to go to the scene in person or even working overtime). Therefore, safety officers should work hard and do their duty. At work, in order not to leave a "dead corner" in safety, the safety officer should patrol every corner of the site, whether it is overhead equipment or underground facilities. It is also the spirit of hard work and selfless dedication of the majority of security officers that has prevented a large number of accidents and protected the health of employees and the property of enterprises from loss.
Five, to have a healthy body and strong psychological quality.
Because the safety officer should go deep into the site, often inspect or even work overtime, so the safety officer should have a healthy body, which is the basis for carrying out safety work. At the same time, safety personnel should have strong psychological quality, because they should constantly correct other people's illegal behaviors in their work, dare to point out the illegal command of leaders, and dare to criticize and educate those who violate labor discipline. No one wants to do these "offending people" jobs, but this "offending people" job is the job responsibility of the safety officer. Because of people's luck in safety work, they often ignore the reminder of the safety officer, even contradict the safety officer, and deliberately run amok in front of the safety officer, so that the safety officer can't get off the stage. At this time, the security officer should pay attention to the working methods, be patient and be able to bear this pressure psychologically. Because avoiding any accidents is your work goal. Only by doing ideological work patiently and carefully, so that they can fully understand and treat safety work and be responsible for it, can we achieve the goal of safe production.
Safety personnel should be diligent in seven aspects.
One day, keep an eye on the work: when a security officer goes to a grass-roots unit, he must observe the machinery, equipment, electrical circuits and protective devices with his eyes, whether employees wear protective articles according to regulations, whether female workers wear protective hats and high heels for long hair, and so on. He must not turn a blind eye.
Second, the ear is diligent: when the machine and equipment are running, there is abnormal noise, so the safety officer should be vigilant and not ignore it casually. Safety personnel should also pay attention to listen to the voices of the masses, understand the rationalization suggestions and technical transformation measures of front-line employees, and think calmly even if they hear harsh suggestions, and change them if they have them, and encourage them if they don't.
Three-day nose suit: every time a safety officer goes to a production site, he has to play the role of smell, such as smoke smell, burnt smell, burnt glue smell, musty smell, etc., which may be the precursor of the accident.
Four-day leg attendance: go down regularly or irregularly to know, be familiar with and master the running state of mechanical and electrical equipment within the production scope under its jurisdiction, so as to achieve "know fairly well".
Five words: diligent mouth: that is, the security officer should have "mother-in-law's mouth and integrity." Not afraid of offending people, dare to grasp and manage. At the same time, starting with ideological education, we will hold meetings everywhere to emphasize safety and drive all employees to pay attention to safety.
The brain is diligent for six days: the modern management of safe production needs diligence. Security officers should analyze and process information and data through understanding and mastering, combined with their actual application in their own brains. Assist grass-roots units and teams to solve hidden dangers in production in time.
Being diligent in writing for seven days: a competent safety officer should be diligent in writing, writing work logs, summarizing experiences and publicizing manuscripts, taking minutes of meetings, writing warning signs, hanging warning sentences, writing blackboard newspapers, praising the typical deeds of front-line employees in safety production, etc. , to promote safety work.