One. Materials to be prepared: laser water transfer tattoo stickers (water transfer printing paper, skin tape, two pieces form a set, both of which are indispensable), computers and laser printers.

Two. Materials to be prepared: pattern, ps, wps.

Three. Tutorial produced:

1, first find the picture you want to print online.

2. Use ps to adjust to the color you need.

3. Put the picture into wps, adjust the size, and select reverse printing when printing.

4. Print the glossy side of the water transfer printing paper up (the side with ink), and if the printer has the ink side down, print it in reverse.

5. When finished, remove the bright side of the tape.

6. Cut out the size you need.

How to use tattoo stickers

1. Cut out the pattern you like and tear off the transparent paper on the surface.

2. Stick the patterned side on the skin.

3. Wet the tattoo paper with a wet towel.

After 4.30 seconds, take the white paper from the bottom.

5. It can be dried naturally.

Tattoo cleaning method

1. Apply a small amount of alcohol to the water pipe to be dismantled, and wait 10 second.

2. Scrub with soap.

3. Wash with cotton swab dipped in BB oil or cold cream.

4. If there is offset printing on the paste, it can be coated with vinegar. You can wipe it with a cloth after soaking.