Time flies, time flies. In a blink of an eye, I have graduated from school for fifteen years and worked in Datong Coal Mine Central Machinery Factory Industrial Company for fifteen years. In the fifteen years of working in an industrial company, I have gained both sureness and joy, as well as regret and guilt caused by lack.
The Central Machinery Factory Industrial Company is an enterprise that mainly produces idlers. The work of the technical department is heavy and arduous, because it shoulders the research and development and production of the company's products. Under the guidance of the company leaders and masters, I have better integrated into this tense and rigorous working atmosphere, successfully completed all the work arranged by the leaders, greatly improved my professional quality and working ability, and have more confidence in my work. In the past fifteen years, I have participated in more product design and improvement work and benefited a lot from it. Not only have I learned a lot of professional knowledge, but also have a more comprehensive understanding of belt conveyor idlers, and cultivated the basic qualities that should be possessed as an assistant engineer. At the same time, study hard and insist on self-study to improve the theoretical level. The specific summary is as follows:
I. Achievements in 1996-20xx
I am a college graduate who has just entered the society. I am 19xx Fushun Coal School, majoring in mechanical design and manufacturing, and 20xx Datong University, a new employee majoring in mine electromechanical (correspondence). First, attend the company's training. Understand the basic situation of the company, understand the basic work and tasks of working in the company. As a new employee, I also actively participated in other trainings organized by the company and learned a lot of knowledge and ideas that I had never been exposed to before. After officially joining the company, at first, I felt that everything was at a loss. Although I majored in mechanical engineering, I only studied it at school.
There are few opportunities to practice some theoretical knowledge, and the workshop is a good place for me to study and practice. When I arrived at the workshop, I found that the theoretical knowledge I learned at school was too superficial and it was very difficult to work. In the company, I humbly ask the master, and I will ask if there is anything I don't understand. I seem to be busy with these equipment drawings. Only after I went to work did I know that I had little knowledge and had a lot to learn. Therefore, I humbly ask the master, ask more questions and look at more pictures. Based on my job, I'm afraid I won't ask if I don't learn. During my time as a technician, I quickly got a basic understanding of the company's products because of my diligence and good guidance from my master. I also know about parts, so I work very hard. If I can't do it well, I have to be reworked by others, which is also a waste of other people's working time.
While working, I also found that my mechanical drawing ability is not very good. Combined with the needs of work and personal actual situation, I focused on learning the relevant knowledge of electronic drawing. The basic skills of mechanical drawing have been greatly improved. This has brought great help to my future work.
Through nearly ten years of work practice, my mechanical knowledge and work have been greatly improved.
Two. Work achievements in 2006-2008
After more than three years of work, I have completed the complete transformation from school to society, abandoned those unrealistic ideas and devoted myself to my work. As my work became more and more handy, I began to think about how to make new achievements in my work in order to realize my own value. I have always been very active and don't want to fall behind. I keep telling myself: I must do everything well and go all out.
Through this year's experience, I deeply realize that carefulness and preciseness are the qualities that should be possessed, while mastery, similarity and innovation are the key factors of mediocrity or Excellence.
Because I am eager to learn and have a serious work attitude during my work, I have learned a good basic job, so I work smoothly and my ability to read pictures is good. I quickly adapted to the work of independent design and was praised by the leaders many times. Together with several other technicians, I designed and manufactured JY2A/B leak detection relay, declared mine safety signs, and obtained coal mine safety qualification certificate.
Three. Achievements from 20xx to 20xx
After two years of work, I have accumulated some work experience in practice and learned something from my master. Because the company produces idlers, the work of our technical department is not only design, but also the improvement of more important products. Product improvement experience is the most important. I have been exposed to product improvement since 20xx. Of course, at the beginning, I made progress with my master. Improvement is to make local changes on the basis of the original product, and achieved good results. After improvement, the product is tested and inspected to eliminate all abnormal conditions and complete the qualified appearance of the product.
Due to the accumulation of work experience in the usual design work, I know every part of the parts like the back of my hand. So it is not difficult to learn, because many parts are externally processed, so there will inevitably be some problems. During the experiment, if you are not careful, it will be difficult to find the problem. Which part doesn't work normally, or doesn't move, or is inflexible, you will take many detours and you won't find the problem.
Deal with problems in time. Usually learn slowly from the master, watch what they do, how to deal with every problem, and write down every problem carefully. When I improve myself, the same problem will be solved.
I started to improve myself. It didn't go well at first, and there were many problems. Every time I have a problem, I can write it down. Some problems are caused by the lack of design, such as too many grooves in the bearing seat or too much pressure when installing the bearing. After discovering these problems, we will pay attention to these problems in the future design to avoid the trouble in improvement. Some problems are sometimes caused by unqualified purchased parts and abnormal shipment. These problems can be eliminated if they can be eliminated in advance in future design work. If these problems are found in the future improvement work, we will know where the reasons are and how to solve them.
Through a period of design, I gradually accumulated some experience in product design. At the beginning, I always improved with the master, and my main job was to assist the master to complete the product improvement work. However, it is more important to learn how to successfully complete product improvement. I don't know how the product works until I get to the scene, so I can learn more mechanical knowledge. See the good in others.
Fourth, what is not done enough?
1, lack of innovation.
Can't take the initiative to play their own ability, can only passively adapt to the needs of the work. Basically can complete the business, but will not take the initiative to lead the work, so it is very passive. So I lost some opportunities and my work didn't rise to a certain height.
The work is not very solid.
There are some problems, such as being too arrogant and lazy. I can't concentrate on work and study. Although I know a lot of knowledge, I am not good at it. You can't take the initiative to speak in company training, and you haven't completely let yourself go.
In my past work, with the care of leaders and the support and help of comrades, through continuous efforts, I have adapted to this kind of work and have certain technical work ability, but there are still some shortcomings that I need to take as a warning. For example, my language skills need to be strengthened. Maybe it's because of my personality. I don't like talking about it I just like working hard. Now it seems that this is not enough, and we need to communicate with others. In my future work, I will strengthen my study, overcome my shortcomings and strive to continuously improve my professional and technical level. At the same time, I clearly realize that in order to adapt to the new situation of oilfield construction and development, we need to constantly strengthen theoretical study, especially the study of new technologies and theories, work hard, exercise and grow in practical work, accumulate work experience, and improve business ability and work level. I will be energetic, forge ahead, and make unremitting efforts for the development of the company and the realization of personal values.
Technical summary of mechanical engineering review
We often lament the lost opportunities or achievements, but often forget to appreciate what we have now.
A writer once said that what is an opportunity is to be satisfied with what you have, otherwise you will never get an opportunity. We should realize that the tasks assigned by the boss can exercise our will, the work assigned by the boss can develop our talents, the cooperation with colleagues can cultivate our character, and the communication with customers can train our character. Enterprise is another school in our life. Work can enrich our thoughts and enhance our wisdom. So here it is.
I learned a lot in Qiyuan, which gave me a broader and firmer grasp of my major and enriched my knowledge, such as some etiquette training, team training and marketing training. People can't control the length of life, but they can expand the width of life. More importantly, they have cultivated my habit of summing up my studies. In these three years, the company leaders have trained and guided me: Qiyuan culture has influenced me and communicated with me.
The primary school team and so on let me learn a lot, improve a lot and grow a lot.
The professional and technical work in recent years is summarized as follows:
First, study hard in professional and technical business and do a good job.
Since I started working in Qiyuan Electromechanical Company, I have done a good job. In daily work, with solid professional knowledge and theoretical foundation, I am proficient in all aspects of work, from equipment assembly to on-site installation and debugging, as well as mechanical processing technology, mechanical drawing, mechanical equipment technology and so on. The technical documents and various working materials formed in the work are rigorous in structure, standardized in terminology, unique in opinions and sophisticated in judgment.
The core values of Qiyuan culture are "kindness, hard work, learning and harmony", which gives you a yardstick for doing things. As a technical service personnel, how to create benefits for the company, how to make your life perfect and personal value reflected. Goodness is the premise and foundation, while doing and learning are the process and approach, which will eventually become the inevitable result. For the benefit of others, I will put myself in others' shoes to create value. I can stand in other people's perspective, do good deeds, be honest and sincere. With this premise and mentality, I will work hard, work hard, work hard for the company, work hard for customers and work hard for myself.
Dilute power, strengthen ability, talk less and do more, do it first, and add your own skills and ideas. Adapt to social changes and the development needs of the company. Learning, learning and re-learning are the eternal themes of Anqiyuan people. Study for life, study for development and study for changing life. Learn from books, learn from others, constantly reflect on yourself, and strengthen the cultivation of mind and the improvement of ability through persistent learning. Always maintain your core competitiveness. The key to a person's success or failure lies in his attitude towards life and what he will do when no one knows.
In order to meet the needs of the development of the new situation, we should strive to improve our theoretical quality and professional level. Every time I go back to the company's notes, I also arrange my own study. Seize every learning opportunity, study professional technology seriously, understand the important idea of "being good at learning and living in harmony", learn professionalism and professional knowledge, arm yourself theoretically and practically, and constantly improve your professional theoretical level and service consciousness. Through learning, always alert yourself, restrain yourself and improve your ideological realm. So as to better serve users. I changed my mind, deeply reflected on my problems, and promoted my skills and mentality. More business opportunities, better service attitude and higher work enthusiasm. Grasping the difficulty is how to maintain this mentality for a long time, as always. After ten and a half days, "Jiangshan still hasn't changed." How to maintain your good style of work is not something you can do by surprise. I think it is more effective to use system management, set rules for ourselves and strengthen self-examination, which can play a more obvious role. Make the machine tighten a string at all times, which effectively promotes the orderly work and makes the personal mental outlook look brand-new.
Today, with the rapid development of science and technology, the competition is becoming more and more fierce. The development of modern society is changing with each passing day, and knowledge is updated very quickly. If you don't add new knowledge in time and keep learning and communicating, you can't meet the needs of enterprise technology management and will be eliminated. I personally realize that only by constantly learning new knowledge, mastering new skills and constantly improving my professional level and skills can I meet the needs of my work and adapt to the development of society. In the course of my work, I will constantly ask my experienced colleagues for advice, learn techniques or skills that I have never really mastered, and apply them. I will also collect and sort out some information in the production process and turn it into information for later use. In my spare time, I read some professional books and websites to learn and master some advanced professional and technical knowledge. I also read some management books or other websites to learn all kinds of knowledge and improve my comprehensive ability. In my future work, I will improve my quality through continuous study and practice, so that my progress can be synchronized with the development of society to meet the needs of my work.
Second, the work experience
I have heard that mechanical work is very tiring and workers are very hard. After coming to the company, I felt the hard work of my colleagues. In Qiyuan, colleagues used four special words to describe it: special effort, special diligence, special dedication and special patience. Colleagues travel abroad for three seasons all year round, so they can't take care of their parents, wives and children. They work hard and never complain. This spirit of selfless dedication is something I must learn.
Learned. In the communication with workers, I learned how to face difficulties, how to be a man, and established a correct outlook on life and values. Whether it is on-site installation and debugging or in-company equipment, the requirements for equipment quality are getting higher and higher, and technicians must strictly control it, especially the management and mandatory provisions of low-old and bad problems. After three years of work and study, I feel that as a technician, I must be careful and conscientious, do every step of work well, be familiar with process flow, drawings and specifications, constantly learn engineering-related and professional-related knowledge, and arm myself with knowledge. This is another year of ups and downs in my work. Every time the company gives me an opportunity, it is a kind of trust, a test and an exercise for me. Indeed, born in sorrow, died in happiness. In today's fierce competition, it forces you to study, stand on your own feet, challenge yourself and adapt to the high demands of others. Only on this tight string can we feel the fullness, richness and significance of life. I soon mastered the method of mechanical work. Only when people really understand the great works of thought will the environment not be an excuse for failure.
I learned a lot from my work, which added more motivation to my future work. I like the spirit of our company, "starting from scratch and pursuing perfection". This is what a person should do. Only by starting from every little thing can we accumulate more experience. Setbacks and failures in our work are inevitable. As long as we face them frankly, we will learn a lot from them. People who can't stand setbacks can't do a good job, because everything can't be arbitrary. Behind success and failure, we can experience some things. Our technical service personnel should sum up more experience from the process of various diseases and really serve users well. At the same time, in the process of work, we can also feel the correctness of the company.
Our concern and expectation, so everyone should try their best to do their own work and contribute to the development of the company.
Third, ideological experience.
XX is the first year when I really took up my job. Everyone has different understanding and feelings about work or career, so do I. For me, I usually grasp my own ideological context from two angles.
The first is mentality, to paraphrase a famous saying, "Attitude is everything". With the right attitude, we can find the right direction in the right way and get the right result. Specifically, my attitude towards work is to choose what I like and then do my best for what I love. I have always believed that work should not be a task, not a burden, but a pleasure and enjoyment, and only you are completely interested in it. I believe that I will find the pleasure of working in the process of trying to explore and discover this business, and I can do my best for it without reservation. It can be said that only when you know how to enjoy your work can you know how to succeed, and you can't be forced during the period.
Secondly, the problem of ability, which can be divided into professional ability and basic ability. I can use a simple example to illustrate my understanding of this problem: for a camel, professional ability determines that it can survive in a desert environment, while basic ability, including adaptability, perseverance and natural vigilance, determines that it can survive in a desert environment.
How long will it last? As far as people are concerned, your professional ability determines that you are suitable for a certain job. Your basic abilities, including self-confidence, cooperation, responsibility, adventurous spirit and development potential, will directly determine the vitality of your work. A successful person must be a person who can coordinate the development and operation of the two abilities well. XX years ago, I devoted myself to my work with a brand-new mental state and studied hard. Improve working ability. Actively respond to the company's measures to strengthen management and abide by the company's rules and regulations. Although some achievements have been made in less than one year's work, there are still many problems in the work, mainly including:
Lack of innovative spirit.
Can't take the initiative to play their own ability, can only passively adapt to the needs of the work. Basically can complete the business, but will not take the initiative to lead the work, so it is very passive. So I lost some opportunities and my work didn't rise to a certain height.
The work is not very solid.
There are some problems, such as being too arrogant and lazy. I can't concentrate on work and study. Although I know a lot of knowledge, I am not good at it. You can't take the initiative to speak in company training, and you haven't completely let yourself go.
This is my summary of my work in the past year, so I won't say much. But I think it is more convincing to do it with practical actions. So I will work hard in the future, continue to consolidate the existing achievements, improve my own shortcomings, and strive for by going up one flight of stairs in the future work!
What I learned in Qiyuan is not only useful now, but also will benefit me for life. Thanks again to Qiyuan.
In short, in these four years, I have made great progress in both technology and management. In the future, on this basis, I will study hard and make persistent efforts to raise my work level to a higher level and contribute to the development of the company.
. I graduated from a university majoring in electrical engineering and automation in June, joined a company in July, and transferred to a power plant in Huaneng. From work to now, I have participated in factory education, military training to internship in operation and maintenance department, and participated in equipment installation and tracking in a power plant. In this process, I learned a lot and made great gains and progress in many aspects. I have changed from a college student to a qualified employee of a large state-owned enterprise, and I have a deep understanding of my present job. The professional and technical situation in the past year is summarized as follows:
Security aspect
Preventing accidents and ensuring personal safety are the primary tasks of the power sector. In the process of repeatedly operating and maintaining the equipment with my master, I always adhere to the policy of "safety first, prevention first and comprehensive treatment", strictly implement the electric power safety work regulations, carefully analyze various difficulties in safety work, and formulate various safety measures consciously, purposefully and emphatically according to the characteristics of each task. In addition, the daily safety study organized by teams and groups should be carefully studied, and the safety accident cases should be carefully discussed and analyzed, so as to learn from them and prevent the recurrence of safety accidents.
Second, study and work.
1, the perfection of basic theory
In college, we learn more theories than objects and examples. The integration of theory with practice is not enough, and the theory is divorced from practice, which is not conducive to in-depth research. The so-called behind closed doors, without the guidance of practice, the theory will not be greatly improved. After coming to Jinghong power plant, the theoretical things in the past were guided by physical objects, which made the original vague concepts clear. Outstanding performance in the generator rotor, stator, water turbine, excitation system, speed control system, hydraulic structure and other structures have a deep perceptual knowledge.
2, the improvement of professional skills
During the operation, I followed the team leader to learn how to check the equipment, what to pay attention to during the inspection, and how to use the inspection instrument. Under the guidance of the masters, we slowly began to learn the objects to be monitored, the normal operation state of the equipment and how to judge and eliminate the faults of the unit. Every time we are on duty, our senior brothers should ask us questions, and try to learn a simple operation every eight hours. During the duty, it is necessary to make accident prediction, master the current situation of equipment in the whole plant and strengthen the monitoring of defective equipment.
In the process of being on call, we mainly learned how to write operation tickets and how to deal with various work tickets. When the unit was overhauled, we accompanied the master to do the safety measures for overhauling the unit, and learned how to restore the safety measures after overhaul. All these tasks need us to take them seriously and check them carefully. Only in this way can the safe and stable operation of the unit be guaranteed. During the operation, I participated in the start-stop operation of the unit for many times, and got a certain understanding of the start-stop process and matters needing attention.
During the maintenance period, under the guidance of the master, I learned to look at the electrical secondary diagram, understand the basic working principles of the excitation system and governor, and learn some basic principles and applications of the electrical controller and plc. During the overhaul of Unit 5, I mainly studied instrument knowledge with the master, and mastered the working principle and calibration method of measuring elements such as power transmitter, frequency transmitter, pressure gauge and digital display meter. And master the arrangement and setting value of main non-electric measuring points such as oil temperature, oil pressure, oil level and tile temperature in our factory. At the same time, I also mastered the use of some experimental equipment. In thermal instrumentation, understand the working principle and function of other sensors. In addition, I also participated in the maintenance of the governor of Unit 5. Through on-site study, I have a deeper understanding of the governor system and a systematic understanding of the things on the drawings.
In addition to maintenance tasks, we often work with the master to eliminate defects and deal with abnormal equipment. At work, the master often lets us assume that we are the person in charge of the work, how to deal with the problem, arouse our enthusiasm to solve the problem alone, and give us a lot of room for thinking. Through the teacher's inculcation, I summed up the matters that should be paid attention to when dealing with equipment failures: First, we should be familiar with the structure, principle and function of equipment in the system; Then, we can realize where the fault should be, how to deal with it, and what other equipment may be involved in the treatment; Only in this way can we judge what safety measures should be taken to avoid hurting ourselves and equipment.
Third, training and learning.
Since entering the power plant, the company has provided us with a good learning environment through various channels. From the initial induction training to the professional knowledge training arranged by the team every week and the monthly departmental examination training, when the factory representative came to assist in the work, the leaders also seized the opportunity to invite the factory technicians to tell us all kinds of professional knowledge, such as the training of plc basic knowledge and application, and the training of governor basic knowledge. In April, 2009, the power plant also sent us to participate in the training of "Senior Duty Officer of Hydro-generator Unit Operation". In the process of continuous training, each of us has gained a lot. In addition to participating in various trainings organized by the collective, I also read some books on operation and maintenance of power plants in my spare time, such as Automation Device of Hydropower Plant, Operation Duty of Hydropower Station, Principle and Application of plc, and Relay Protection of Power System, which enriched my professional knowledge.
Fourth, the existing shortcomings and the direction of future efforts.
1. The theoretical knowledge of power plant production is not deep enough, because it is "operation and maintenance integration". Compared with the old production mode, we know a little more, but we haven't studied professional knowledge deeply enough. In the future, we should continue to strengthen the study of a certain professional knowledge and strive to achieve the requirement of "one specialty and many functions" as soon as possible. Improve their comprehensive ability and keep up with the development needs of power plants.
2. In the usual work, although I participated in a lot of specific work, in view of the different division of labor during the maintenance period, my understanding of the whole system is still at the theoretical level, and my study of the system is still scattered, lacking a clear understanding of the whole, so I can't be independently responsible for the fault diagnosis and maintenance tasks of important and complex equipment. The improvement of this ability is also the main task of my future work and study.
3. The understanding of the system has not yet reached the detailed requirements, so it still lacks the ability to design and transform the system. And having strong system design and transformation ability is an important symbol of our understanding of the system and professional ability. In the future work, we should also strengthen the research on the macro and micro aspects of the system, improve the overall understanding of the system, and strengthen the comprehensive consideration of problems.
4. Not paying enough attention to social science and technology information and not knowing much. We should learn as much as possible about the industry information through multiple channels and keep up with the update speed of science and technology in the power industry today. Provide us with as many methods and technical support as possible to solve the current problems.
5. "Learn from the past, learn from the future" In the work, insist on working exchanges with colleagues and masters, learn from their work experience, and accelerate their progress.
Although we have made great progress through our own efforts with the care of teachers and the help of colleagues, there are still many problems and deficiencies. In my future work and study, I will continue to strengthen my professional knowledge and improve my quality and working ability. In the process from theory to practice, we should treat it with meticulous attitude, be down-to-earth and refuse to understand; Communicate with teachers and colleagues, actively absorb their rich practical experience, find and summarize existing problems in time, and correct them immediately; Hard-working, correct attitude, truly "quiet, enlightened and practical" in thought, strict with myself, devote myself wholeheartedly to future study and work with full enthusiasm, and strive to be an excellent electric worker.