In the campus network that has been realized at present, after the authentication is successful, the address will be sent to you through the DHCP server. Moreover, in order to prevent possible attacks on the campus network, the IP addresses issued are basically bound to your account and mac address. If you use wireless mode, it will send you the IP address of a wireless router. The authentication initiated by your computer cannot reach the authentication server of the school through the router, so it cannot be realized.
First, the method of opening the campus network WiFi with a router
1. We downloaded the Android mobile phone simulator and the Android Pocket University app installation package on the browser under the normal networking state.
2. We installed the Android phone simulator, opened it, and dragged the Pocket University app into the simulator, so that the Pocket University app can be successfully installed in the router.
3. We began to connect the router and the computer, and pay attention to distinguish the WAN interface from the LAN interface.
4. We enter192.168.1.1in the web address bar of the computer browser, set the router password and other information, and enter the router management center;
5. We set password and other messages in the router management center, set the internet access mode to automatically obtain IP, and record IP and gateway data in the advanced settings;
6. We enter the simulator again, and click Settings-Wlan-Long press the left mouse button to select Modify Network-Check Advanced Options-Change IP to Static-Enter IP and Gateway recorded in the browser-Click Save;
7. We open Pocket University in the simulator, click on the campus broadband in the upper right corner, enter the account password, check all the boxes inside, and click Login.
8. We can see that computers can surf the Internet, mobile phones can connect to WiFi, and support various settings to connect to WiFi.