Common sense of safety management 1. What is safe production? Safety in production refers to efforts to improve working conditions, overcome unsafe factors, prevent casualties and ensure the smooth progress of labor production under the premise of ensuring the safety and health of workers and the safety of state property and people's lives and property. 2. What is China's production safety policy? Safety first, prevention first and comprehensive treatment. What is the task of safety production management? 3. 1 Implement the national laws and regulations on production safety and implement the safety policy. 3.2 Formulate various rules and regulations for safe production, and earnestly implement them. 3.3 Actively take various safety engineering technical measures for comprehensive management, ensure that employees have a safe and reliable working environment, and reduce and eliminate casualties and property losses caused by various accidents. 3.4 Take various occupational health measures, constantly improve working conditions and environment, regularly check, prevent and eliminate occupational diseases and occupational hazards, and ensure the physical and mental health of workers. 3.5 Conduct safety education for enterprise leaders, special operators and all employees to improve safety quality. 3.6 Investigate, handle and report the accidents of workers' casualties and various accidents in the production process. 3.7 Implement safe production target management, popularize and apply modern safety management technologies and methods, and deepen enterprise safety management. 4. What are the three rules and five rules? 4. 1 The three major regulations refer to the factory safety and health regulations, construction and installation regulations and safety technical regulations, and employee casualty accident reporting regulations. 4.2 The five provisions refer to the responsibility system for production safety, the preparation of labor protection measures, the education of production safety, the regular inspection of production safety, and the investigation and handling of casualty accidents. 5. What is the principle of "three don't let go"? The state requires enterprises to implement the principle of "three don't let go" when dealing with accidents, that is, the cause of the accident is not clearly analyzed. Those responsible for the accident and the masses were not educated; No preventive measures were implemented. 6. What is the responsibility system for production safety 6. 1 The responsibility system for production safety is a system in which leaders at all levels, functional departments, engineering and technical personnel and post operators are responsible for production safety at all levels in the process of labor production. 6.2 This is an important organizational measure to ensure safety in production. For the safety responsibility of production workers, it is mainly to consciously abide by the rules and regulations of safety production, not to operate illegally, to stop others from operating illegally at any time, to actively participate in various activities of safety production, to actively put forward opinions on improving safety production, and to care for and correctly use machinery, equipment, tools and personal protective equipment. 7. How should employees obey the rules and discipline 7. 1 In order to obey the rules and discipline, employees must establish five restraint mechanisms for safe production. Namely: 7.2 Legal restraint, it is necessary to raise all employees' awareness of safety in production to the height of the legal concept of safety in production, so that all workers can use the existing labor safety and health laws and regulations to restrain their behavior. 7.3 system constraints, establish complete safety rules and regulations, safety operation procedures and technological processes, and carry out production in strict accordance with the rules and regulations, so as to improve the sense of responsibility of all employees for safety production. 7.4 Standard constraints, safety in production must be standardized, and the production site must reach a unified standard, and you must never go your own way and do whatever you want. 7.5 Check the constraints. Safety supervisors at all levels should carry out in-depth and meticulous safety inspections, put an end to violations, and immediately rectify problems when found. 7.6 Supervision and restraint, strengthen the supervision function of safety production management network, discover, analyze, judge or control various unsafe factors in advance, and prevent accidents. 8. What are the rights and obligations of employees in terms of labor safety and health? 8. 1 has five rights: 8. 1. 1 has the right to know the possible health hazards and possible accidents caused by work. 8. 1.2 have the right to obtain working conditions and labor protection articles to ensure their health and safety. 8. 1.3 has the right to refuse the illegal command of the management personnel of the employer and force them to take risks. 8. 1.4 Have the right to criticize, report and accuse acts endangering life safety and health. 8. 1.5 In case of emergency that seriously endangers life safety, it has the right to take necessary measures to avoid danger urgently, and shall report relevant information to the management personnel of the employing unit. 8.2 Party B must undertake corresponding obligations: 8.2. 1 Party B must strictly abide by the safety operation rules and regulations of the employer. 8.2.2 Use all kinds of labor protection articles correctly according to regulations. 8.2.3 Must obey the production command of the employer's management personnel, and shall not act at will. 8.2.4 When discovering unsafe factors or dangerous situations that endanger health and safety, it is obliged to report to the management personnel. 9. What are the safety responsibilities of employees? 9. 1 Consciously abide by safety production rules and regulations and labor discipline, do not operate illegally, and stop others from operating illegally at any time. 9.2 Abide by the provisions of the relevant equipment maintenance system that employees should do, and fulfill their responsibilities for the safety and normal operation of equipment. 9.3 Take good care of and correctly use machinery, equipment, tools and personal protective equipment, care about the surrounding safety production situation, and put forward reasonable suggestions. 9.4 If hidden dangers and unsafe factors are found, report to the team leader or relevant departments in time. In case of industrial accidents, rescue the wounded in time, protect the scene, report to the leaders, and assist the relevant investigators in the investigation. 9.5 Study hard and master safety knowledge and skills, master the operation rules and safety operation rules of this type of work, actively participate in various safety production publicity, education, appraisal, competition and management activities, firmly establish the idea of safety first and self-protection awareness, obey the rules and discipline, refuse to command against regulations, and be responsible for personal safety production. 10, what is safety education? What are the forms and contents? 10. 1 safety education, also known as safety production education, is an education and training work to improve the safety technical level and accident prevention ability of employees. 10.2 its main forms are: factory education, workshop education, team education, also known as three-level safety education. 10.3 safety education generally includes: 10.3. 1 ideological and political education, aiming at improving safety awareness, self-protection awareness, correcting attitude and firmly establishing the idea of safety first. 10.3.2 safety technology knowledge education, including safety technology, occupational health technology and professional safety technology operating rules, enables employees to understand the scientific and technological knowledge of preventing accidents and occupational hazards, which not only establishes what I want to do ideologically, but also technically becomes "I can do it, I will do it". 10.3.3 typical experience and accident lessons. 1 1. What is safety production skills education? Safety production skills refer to people's skills and ability to complete homework. It includes operating skills, mastering the skills of operating safety devices and facilities, and correctly handling skills in an emergency. 12, which are unsafe behaviors? 12. 1 Operation error, ignoring safety and warning; Start, shut down or move the machine without permission; Running, feeding or feeding speed is too fast, the machine runs too fast, the hand reaches into the stamping die, and the workpiece is unstable. 12.2 safety device failure: safety device is removed or blocked. 12.3 using unsafe equipment 12.4 operating with hands instead of tools 12.5 venturing into a dangerous place 12.6 climbing in an unsafe place 12.7 ignoring the role of personal protective equipment in operation or where it is necessary to use it: not wearing goggles, protective gloves and safety. 12.8 unsafe clothing: wear gloves when operating rotating equipment.