The installation of wire rope buckle is to meet certain requirements to ensure its later use. The standard specification for the installation of wire rope buckle is:

1. If the diameter of the wire rope is 19mm, four or more buckles are required.

2. The strength of the belt buckle should be above 85% of the rope breaking force.

3, the distance between the buckle and the buckle, to reach more than 6 times the diameter of the wire rope.

4. The U-shaped ring needs to block the rope head, and the pressure plate should hold down the main rope.

What should I pay attention to when using wire rope clamp?

1, when using wire rope, it is necessary to fix the U-bolt. Generally, the degree of tightening is to reach one third of that of flat wire rope. It should be noted that the wire rope will be deformed after being stressed. Therefore, in the stressed state, the steel wire rope needs to be re-tensioned to ensure its firmness.

2. In the later inspection, if it is found that the steel wire rope slips after being stressed, it is necessary to install a rope clamp at a suitable position to better fix the steel wire rope. Generally speaking, the safety rope clamp needs to be installed 50 cm away from the last rope clamp.

3. The cable clamp shall be installed as required. In the process of arrangement, the spacing should be controlled at about 6 times to 8 times of the diameter of the wire rope, and should be arranged in a straight line. In addition, it is necessary to clamp the rope head with a U-shaped ring, and then put it on one side of the main rope with a pressure plate.

4. The size of the selected clip needs to be determined according to the diameter of the wire rope. The clearance inside the U-shaped ring is larger, about 1 to 3mm larger than the rope diameter. If the distance is too large, it is easy to jam the wire rope, so pay special attention.

legal ground

Article 4 of the Law of People's Republic of China (PRC) on Work Safety, production and business operation entities must abide by this Law and other laws and regulations related to work safety, strengthen the management of work safety, establish and improve the responsibility system and rules and regulations for all employees, increase the investment guarantee of funds, materials, technology and personnel for work safety, and improve the conditions for work safety. Strengthen the standardization and informatization construction of safety production, build a dual prevention mechanism of classified management and control of safety risks and investigation and management of hidden dangers, and improve risk prevention capabilities.

Production and business units in emerging industries and fields, such as platform economy, shall, according to the characteristics of their industries and fields, establish and implement the responsibility system for all employees in production safety, strengthen the education and training of employees in production safety, and fulfill the relevant production safety obligations stipulated in this Law and other laws and regulations.