Self-leveling floor paint is a kind of high-performance floor paint, which can make the floor more flat, beautiful, wear-resistant, corrosion-resistant and non-slip. Widely used in industry, commerce, medical care, culture, sports and other fields, it has become an indispensable part of modern architecture. This paper will introduce the operation steps and precautions of self-leveling floor paint for everyone.
Operation steps of self-leveling floor paint
1. Ground preparation
Before the construction of self-leveling floor paint, the ground must be prepared. First of all, clean up the dust, oil stains, water stains and other sundries on the ground to ensure that the ground is clean. Secondly, check whether the ground is flat, and if it is not flat, it needs to be repaired.
Step 2 brush the primer
After the ground preparation is completed, it needs to be primed. Primer can enhance the adhesion of self-leveling floor paint and prevent the coating from falling off. Before painting the primer, it needs to be fully and evenly mixed, and then evenly painted on the ground with a brush or roller, and then dried before the next operation.
3. Brush self-leveling floor paint
Before painting self-leveling floor paint, you need to mix the floor paint thoroughly before pouring it on the ground. Scrape the floor paint evenly with a shovel or scraper to make it naturally smooth and form a flat coating. In the process of painting, attention should be paid to avoid bubbles and flow marks.
Step 4: Paint the top coat.
After the self-leveling floor paint is dried, it needs to be painted with top coat. Topcoat can enhance the gloss and wear resistance of the floor and make the floor more beautiful. The procedure for painting top coat is the same as that for painting primer. The top coat needs to be fully and evenly mixed, and then evenly coated on the ground with a brush or roller, and then dried before the next operation.
Matters needing attention of self-leveling floor paint
1. Built environment
The construction environment of self-leveling floor paint needs to be kept dry, ventilated, dust-free and water-free to ensure the painting quality. In the process of construction, direct sunlight and wind should be avoided to avoid affecting the drying and curing of the coating.
Brush tool
Self-leveling floor paint needs special painting tools, such as shovel, scraper, roller and brush. Before painting, the painting tools must be cleaned to avoid polluting the coating.
3. Coating thickness
The coating thickness of self-leveling floor paint is generally about 2-3 mm. Too thick or too thin will affect the quality of the coating. In the process of painting, it is necessary to control the thickness of the coating to ensure the flatness and wear resistance of the coating.
4. Construction personnel
The construction of self-leveling floor paint needs professionals to ensure the painting quality. Before construction, the construction personnel should be trained to understand the performance of the coating and the construction method, so as to avoid mistakes.