To get the film, you need to confirm the winding direction of the film, find the counterclockwise direction and put it on the film rod for fixing. (Please turn off the power supply when threading the adhesive film) Pay attention to whether the fixing splint before and after the adhesive film is closely combined with the adhesive film. If it can't be tightly combined, it is necessary to cut the inside of the paper tube with a utility knife and put it back in.

After pasting the film, stick the film firmly on the delivery tube with adhesive tape.

Step 2: Sealing operation steps (panel operation instructions)

Turn on the power, turn on the power switch, and the indicator light is on. Set the thermostat to a predetermined temperature, and the green heating indicator will light up. After the hot plate reaches the predetermined temperature, the red constant temperature indicator lights up (when the sealing machine works, the electric heating device alternates between heating and heat preservation, so the green and red indicator lights alternate constantly, which is a normal phenomenon).

Put the plastic cup into the lower die slide plate, push the lower die slide plate to a certain position by hand (if it is a full-automatic sealing machine or an automatic sealing machine, the lower die slide plate will automatically enter after putting the plastic cup), press the sealing machine handle down to the maximum stroke, hold the pressure for 1~2 seconds, and then slowly lift the handle and push it to the original position.

Pull out the lower die slide plate, take out the plastic cup, put it into the unsealed plastic cup, and cycle again.

-

Cup sealing machine

The cup sealing machine is a kind of equipment that can seal the container mouth, and it is suitable for producing all kinds of yogurt, milk, soy milk, juice drinks, condiments, jams and other products. It has the functions of automatic cup dropping, filling, sterilization, photoelectric tracking, sealing (capping), automatic core cutting and waste film recycling. The whole machine has high automation, good sealing strength, reasonable structure and high production efficiency, and is suitable for various imported and domestic composite barrel packaging and sealing materials such as aluminum plastic, PP, PE and CPP. All stainless steel material, the rest is aluminum alloy material, with high mechanical beauty and stable operation, which really meets the requirements of durability.