Current location - Education and Training Encyclopedia - Graduation thesis - What is the function of special gas source purification device in oil field?
What is the function of special gas source purification device in oil field?
Air source purification devices are widely used in power plants, and whether compressed air is dried or not will affect the safe and stable operation of pneumatic control system. Unit failures and shutdowns caused by compressed air with water occur from time to time. Although the compressed air is dry, it still contains some water. And this water division is complicated and uncertain with the accumulation of different seasons. So due to the accumulation of water,

1/ affects the safe and normal operation of gas equipment.

2/ Accelerate the damage of gas equipment.

3/ Gas storage tanks, compressors and other gas supply equipment are seriously corroded, resulting in a vicious circle.

Compressed air with water is a common problem in power plants and is widely used at present.

1 manual drain valve manual discharge

2 Mechanical drain valve discharge

These two hydrophobic ways have the following disadvantages.

(1) Due to the large number and wide range of gas supply points, it is time-consuming and laborious to manually check and drain the steam trap, and it is difficult to judge whether it is hydrophobic and clean.

(2) The mechanical trap has large deviation and poor reliability.

(3) The mechanical trap structure is easy to fail and difficult to repair.

(4) Without the online monitoring function, online monitoring cannot be realized in the monitoring room, let alone communicating with the computer.

Second, the main performance and characteristics of gas source distribution control management system

YZ-GSA gas source control and management system developed by Wuxi Yinzhou Automation Equipment Factory. After years of use and improvement in the power plant, it has entered the fifth generation of programmable intelligent products, with small size, reliable and stable performance and online installation. The problem that that pneumatic actuators and the control unit in the compress air system are polluted by wat is solved.

Features are as follows:

The core components of 1 and YZ-GSA adopt schneider series PLC, and the control configuration work is completed through the upper computer and control program. Solenoid valve adopts SMC products imported from Japan.

2. YZ-GSA has a high-quality soft man-machine interface, and the solenoid valve moves cumulatively and never loses its number. According to the use of the filter, it has the local network function reserved in field interrupt test, soft interrupt test and software design.

3. The product can run reliably under harsh working conditions.

If you are interested in or have questions about the product information of air source purification device, please call Wuxi Yinzhou Automation Equipment Factory.