General template for mid-term report of graduation thesis 1

1. Thesis title: xxx

2. Progress of the thesis: This graduation thesis includes the following parts (1) to consult the synthesis data of various catalysts for synthesizing pentaerythritol ketal. (2) Consult the literature about the synthesis method and application of pentaerythritol ketal. (3) Preparation of catalyst. (4) Arrange the initial data to prepare for the later experiment. (5) Pentaerythritol ketal was synthesized by different methods. (6) Data analysis in the later stage, comparing the advantages and disadvantages of various synthesis methods. (7) Revise and improve the graduation thesis and prepare the defense.

3. The main achievements during this period are as follows: I read a lot of papers and periodicals about pentaerythritol ketal and its catalyst, and learned the main synthesis methods, uses and chemical characteristics of pentaerythritol ketal and its catalyst, so as to prepare for the more accurate completion of the following experiments; Dodecyl tungstophosphoric acid was synthesized from disodium hydrogen phosphate and sodium tungstate, and the optimum reaction ratio and conditions were found by comparison. Pentaerythritol ketal was synthesized from acetobenzene and pentaerythritol under the catalysis of p-aminobenzenesulfonic acid, and the optimal dosage ratio of catalyst, the optimal ratio of reactants and the most suitable reaction conditions were found. The dosage and reaction phenomena of each reaction under different conditions were recorded in detail.

4. Existing problems and solutions: In the process of searching information, we encountered some uncertain reaction principles. After consulting relevant information and consulting the instructor, this problem has been solved. When writing the thesis opening report, the format of the references is wrong. After the teacher's guidance, carefully read the graduation design reference book, and finally modify it. In the first draft of foreign language translation, there are many problems such as language errors, inaccurate translation, format writing errors and so on. I reviewed it many times and completed this part of the task with the help of the teacher. In the operation of the experiment, the unfamiliar operation was solved through the guidance of the teacher and the help of the classmates.

5. Post-work arrangement: By the end of 20xx, the writing of the thesis has been carried out halfway as planned. In the following days, we will try our best to improve the preliminary work and optimize some chapter materials according to the guidance of our tutor. Then continue to complete the later work of the paper, as follows:

(1)20xx year x month x day ~ 20xx year x month x day: finish the experimental work in the later stage of the paper and sort out and analyze the experimental data;

(2)20xx x month x day ~ 20xx month x day: write and complete the first draft of the second half of the paper;

(3)20xx x month x day ~ 20xx month x day: Improve the thesis and prepare the thesis defense.

General template for interim report of graduation thesis II

I. Design Progress (Paper)

1. After the previous study and demand analysis, I have mastered the writing process of java programs, the application of frameworks in java, and the understanding of databases, and I am familiar with the relationship between java programs and databases.

2. The system is comprehensively analyzed, and the demand analysis and functional module design are carried out. The relationship between system and database is systematically analyzed and designed. Optimized the design of the examination table in the database.

3. The design of database is realized, with 8 database tables. Examination form for examination candidates. Multiple-choice table, JCloze fill-in-the-blank table, appraisal table, Jquiz short answer table, multiple-choice answer table, Jcloze fill-in-the-blank answer table, appraisal answer table, etc.

4. Different types of questions have been extracted and combined according to the difficulty setting.

(1) The administrator logs in and enters the test questions.

(2) The administrator manages the test questions in the database, such as deleting and modifying.

(3) Students can get an automatically assigned test paper from the system after logging in.

(4) After logging in, teachers can see the candidates' papers and grade them.

(5) Examination papers submitted by candidates can be graded automatically, such as multiple-choice questions and fixed questions.

5. The translation of 3000-5000 words related to this major has been completed.

Second, the existing problems and solutions

1. The existing problems are: the authority of managers, the authority of students and the authority of teachers.

The solution is to retrieve data from the database according to the entered user name and password, save it as a session according to the user's permission value, and confirm the session when opening a new page.

2. The existing problem is that the examination questions are assigned immediately.

The solution is: when designing the database, set a keyword in each question table to distinguish the selected questions.

3. The existing problems are: the judgment, filling in the blanks and automatic comparison of multiple-choice questions in candidates' test papers.

The solution is to add an answer table and set the keywords of the table associated with it.

4. The problem is: when designing the database, after the candidates finish the test, the test papers answered by the candidates cannot be correctly related to the test questions.

The solution is to set the primary foreign key to connect tables.

5. The existing problems are: system security.

The solution is:

(1) Use the security management measures of the database itself and windows security management measures.

(2) On the system resource access, add a filter to verify the identity, so as to achieve reliability.

Third, the later work arrangements

1. Get the assigned questions as soon as you continue to complete the exam, and the difficulty of the questions fluctuates during the exam.

2. Focus on the distribution of test questions.

3. Test the permissions of different people. If you log in with different identities, you can only see the corresponding pages, which constitutes a test report document.

4. Improve the security of the system. And test it to form a test report document.

5. Conduct acceptance test on the system and form a test report document.

6. After the completion of the system, under the guidance of the tutor, aiming at the development of this system, the existing problems.

And summarize the experience of system development, and write a paper of about 15 thousand words as a report and summary of the completed graduation project.

General template for interim report of graduation thesis 3

1. Collect and sort out the data, refer to some collected data, and have a preliminary understanding of the thesis proposition.

2. Complete the opening report and review it through the tutor and the thesis opening defense team.

3. Find suitable English documents related to reading papers, translate and complete them.

4. Find an internship unit and practice for one month. The internship materials involve social practice and field research related to the thesis.

5. Write down the internship weekly diary during the internship and complete the internship report after the internship.

General template for interim report of graduation thesis 4

I started writing my graduation thesis in March, and it's been more than a month now. From the initial loss, to slowly enter the state. Looking back on my experiences and feelings these days, I am filled with emotion. In the process of this graduation project, I have countless unforgettable memories and gains.

A brief description of the preliminary work

In March, under the guidance of teacher Wei, I chose the topic of my graduation thesis-courseware making and network design of chemical history. After selecting the topic, you should go to the library to find the corresponding literature and collect the reference materials related to the topic, and then read, summarize and sort out these reference materials. How to select a representative, scientific and reliable single research document from these documents is very important. In a sense, the quality of reading and selecting documents directly affects the level of interim report. Therefore, when reading literature, we should write "reading notes" and "reading experience" in order to better write papers and prepare an outline. At the same time, determine the content of foreign language translation. Foreign language translation will be carried out in the next few days. First of all, the uncommon words in foreign literature are retrieved and marked. After that, it will be translated step by step to form the first draft of foreign language translation. Then, sort out the searched literature and write the opening report. And accept the guidance of the tutor and complete the opening report. Prepare for the mid-term inspection. Now we can see that it is still in production and has achieved some results.

Second, the existing problems and solutions

(1) There are few contents related to chemical history in libraries and online databases, and even less materials can be used when making courseware;

(2) It is difficult to apply the software of web page making because of the lack of relevant knowledge before;

(3) During this period, I have been constantly looking for foreign language materials, but I have not gained much, and foreign language materials are hard to find.

Third, the later work arrangements

(1) Learn more about the application methods of Dreamweaver8, Powerpoint, flash8 and other software, so as to complete the production of web pages and courseware faster and better;

(2) Complete the translation of foreign documents and finalize them;

(3) Writing graduation thesis, translating, typesetting, printing and binding foreign materials, outputting courseware by computer, and sorting out graduation thesis materials.

General template for mid-term report of graduation thesis 5

1, graduation design progress

After the graduation project, I got a preliminary understanding of the definitions and uses of nanofibers and electrostatic spinning devices through the previous materials, and further carried out solution configuration, spinning device construction and electrostatic spinning experiments. In this process, I have been doing experiments constantly. In the process of doing the experiment, I found the problems, constantly made comparative analysis, and then revised the relevant parameters reasonably. Aiming at some problems in the experiment, the second reference comparison experiment was carried out. In the course of the experiment, I am also conducting related performance tests. At present, the spinning task required in the task book has been basically completed. The next task is to assemble the battery and test its performance. Although the workload of the later sequence is small, it takes a long time, so we should seize the time.

2. Phased results have been achieved.

1-3 weeks: consult and translate materials, and submit opening questions, internship reports and related translations; 4-6 weeks: according to the experimental scheme designed in the paper, the feasible process parameters are analyzed and the preparation process is improved; Improve the experimental data, do pre-experiments, and build an electrostatic spinning device;

7-9 weeks: prepare fiber felt by spinning in the laboratory, prepare battery cathode material by oxidative carbonization, and measure battery assembly and other related processes.

3. Existing problems (or difficulties encountered)

There is a problem:

(1) The electrostatic spinning machine is complicated in structure;

(2) The spinning dope is unstable, which is easy to block the nozzle or interrupt spinning, and is not suitable for felting;

(3) The spinning experiment is dangerous, so it is necessary to use high-voltage electricity and liquid and gas supply devices.

Solution:

(1) With the help of teachers and classmates, a relatively perfect electrostatic spinning device was built.

(2) changing the experimental materials, exploring the appropriate solution concentration, improving the conditions for preparing the solution, and installing a filtering device on the nozzle;

(3) All experimental devices shall be packaged with insulating paper, and the metal decoration shall be isolated with plastic. As far as possible, high-quality and safe products should be used to build experimental devices.

4, the next step plan

Week 10- 12: Explore the appropriate electrostatic spinning process parameters, and adjust the spinning solution concentration, voltage, receiving distance, gas volume, flow rate, temperature and humidity according to the diameter of the spun nanofibers. Assemble and measure battery related performance indicators.

13- 14 weeks: processing experimental data, writing graduation thesis and preparing defense;

15 weeks: defense.

Week 16: Improve the paper.

5, experimental harvest and experience

Through nearly a month's experiment, I have gained a lot, not only consolidating my professional knowledge, but also exercising my practical potential. In addition, I also learned about the potential of consulting relevant materials through the internet and retrieval, and at the same time deepened the friendship between students and improved teamwork.

Of course, in the course of the experiment, we will inevitably encounter some difficulties and setbacks. At this time, we all try our best to solve problems by ourselves without bothering the teacher, which also teaches us the potential to handle and solve problems independently. Sometimes when we encounter things that we don't understand or understand, several of our classmates will discuss them with each other. Until these problems are finally solved, several of us will feel extremely happy and happy because of the solution of the problems. But sometimes we will encounter professional problems, and if we can't solve them, we will look through them and inquire about relevant information. Through these, we have also increased a lot of knowledge and broadened our knowledge. During the experiment, the teacher also gave us a lot of careful help and guidance, so that we would not be at a loss sometimes. It is under the guidance of the teacher that our experiment can be carried out smoothly and orderly. I really appreciate the teachers' guidance.

On the whole, we really benefited from the experiment. The graduation project really gave us all a good opportunity to exercise, not only learned knowledge, but also exercised the potential of experiment. Therefore, I am very grateful for this opportunity, and I am also grateful to the teachers for their concern, help and guidance. I will continue to work hard to do the experiment well, and finally write a satisfactory graduation thesis and graduate smoothly, which will draw a satisfactory end for my college life!

General template for mid-term report of graduation thesis 6

Subject name: XXX design

School: School of Automobile and Civil Engineering

Major: Civil Engineering.

Student name:

Class number:

Instructor:

20XX year x month x day

explain

1. The interim report of graduation project (thesis) shall include the following main materials:

(1) Whether the graduation design (thesis) is carried out according to the information and progress arranged in the task book and the opening report;

(2) The design (thesis) work and achievements that have been completed so far;

(3) Existing problems and solutions;

(4) Design (thesis) work and progress to be completed in the later period;

(5) The possibility of completing all the design (thesis) work on schedule.

2. Instruct teachers and students to fill in the mid-term checklist of graduation project (thesis) truthfully.

3. The interim report of graduation project (thesis) shall be filled in and signed by the instructor, and submitted to the Department's teaching and research office for filing for future reference.

4. The interim report shall submit the following documents and materials

(1) graduation design (thesis) task book;

(2) Mid-term check list of graduation design (thesis);

(3) Interim report of graduation project (thesis);

(4) Design category: architectural design description (scheme discussion, etc. ) and drawings, road and bridge design instructions (scheme discussion, etc. ) and drawings, text descriptions, etc. (including electronic version);

Thesis: Staged research results (some experimental results), text descriptions, etc. (including electronic version), and the text of the paper is not less than 2500 words.

Note: 1. This report must be independently completed by the students who undertake the task of graduation thesis (design) before receiving the Graduation Thesis (Design) Task Book and officially starting to do graduation thesis (design), and submitted to the tutor for review.

2. Write this report for each graduation project (thesis) as the basis for the instructor and the graduation thesis (design) guidance group to assess whether the students can carry out the next stage graduation project (thesis) task and file it.

General template for interim report of graduation thesis 7

According to the spirit of the document "Notice on Doing a Good Job in the Mid-term Examination of Undergraduate Graduation Design (Thesis) in 2009" issued by the Academic Affairs Office, the College of Education has carefully organized the self-examination work. The self-inspection is now reported as follows:

First, college leaders attach great importance to it.

The leaders of the college and the members of the graduation thesis leading group carefully studied the spirit of the notice at the working meeting of the graduation thesis leading group, conducted special discussions and studies, and decided to set up an expert group composed of members of the college steering Committee to take charge of the graduation thesis mid-term inspection, formulated the working steps, methods and requirements, and arranged their respective tasks.

Second, careful planning.

According to the inspection notice of the school and referring to the inspection contents and methods required by the notice, our hospital has formulated a detailed and meticulous work plan. The inspection is carried out in two stages. The first stage is self-examination, in which the teaching management section, instructors and students conduct self-examination on the mid-term work of the thesis to prepare for the college inspection. The second stage is the college investigation stage, which comprehensively inspects the management materials of the college, the mid-term inspection list of the instructor and some students' papers. On the basis of comprehensive inspection, teachers and students will hold seminars respectively to listen to their opinions and suggestions on the rules and regulations of graduation thesis work and safeguard measures, further standardize management and improve the quality of graduation thesis.

Third, the inspection work is careful and meticulous.

In the self-examination stage, all aspects of the college can complete the work seriously and successfully on time with good quality and quantity.

On the afternoon of March 6th, members of the steering committee of our college conducted data checking, teachers' representative forum and students' representative forum respectively as planned.

(A) the graduation thesis mid-term data check

According to the requirements of the notice of the Academic Affairs Office, our college decided to conduct a comprehensive inspection of the relevant documents and materials of the college and the mid-term inspection list of the instructors. At least 1/4 of the total number of students' thesis materials are randomly selected, and each class randomly selects 1 student materials to check the completion of the thesis work. The specific inspection is as follows:

1 management:

University graduation design (thesis) management documents, including documents and notices, are complete, standardized and orderly. The graduation thesis work plan is detailed and concrete, which meets the requirements of the school and the students' learning situation. The whole paper work is basically carried out according to the planned time, and more than 8% of the paper work has been completed. The detailed rules for the implementation of graduation thesis formulated by the college conform to the characteristics and requirements of disciplines and specialties of the college and meet the requirements of graduation thesis work of the school. The requirements for all aspects of graduation thesis work are very detailed and clear at a glance.

In order to ensure the quality of students' papers, the college has done a lot of preparatory work, such as formulating detailed implementation rules for graduation papers and implementing them in various ways during the writing process. First of all, strictly control the three islands: topic selection, topic opening and defense. The second is to open up three information channels: one is through the information points of each class, and the other is through the graduation thesis column of the college website.

Third, through the guidance of teachers and class teachers. The third is to create two management lines: one is the graduation thesis leading group, and the other is the administrative management of the department head and the director of the teaching and research section. A multi-channel and multi-form management mode has been formed, which ensures and improves the quality and level of graduation thesis in our college.

In order to ensure that the thesis is completed on time and with good quality, at the beginning of the new semester, our college has strengthened the management of graduating students. At the beginning of the semester, our college held a meeting of graduating students, at which the management of students in the process of graduation thesis writing was emphasized. All students are required to write papers carefully at school, nothing special. If they need to ask for leave, they must first obtain the consent of the instructor and get the signature of the deputy secretary in charge of student affairs before leaving the school.

Instructor:

The vast majority of instructors are conscientious and responsible in their work, giving careful guidance and not being afraid of trouble. There are two ways to guide students' papers: face-to-face instruction and online instruction, and the average number of instructions per student exceeds 1. Teachers' earnest, careful and strict requirements for students have been highly praised by students.

The guidance work record is timely and complete, and the network guidance record can be supplemented in time afterwards. The guidance methods are diversified, and the instructor can generally formulate appropriate guidance methods according to the characteristics of students and the direction of the research content of the paper, which can not only make students easy to accept, but also contribute to the smooth progress of the paper work. The work of the thesis has gone through topics selection, topics review, literature retrieval, translation and topic opening report. At present, students' thesis writing has reached the final stage, waiting for review and evaluation.

The instructor believes that most students are serious and active in writing papers, and can basically complete the phased work of the papers on time. In order to ensure the quality of students' papers, tutors take pains to guide students to consult documents, write and modify the outline of papers, and read and modify papers repeatedly through face-to-face and online guidance. Although the work is progressing smoothly, there are still many problems and shortcomings, such as some students' lack of knowledge reserves, some students' delay in writing papers because of postgraduate entrance examination and job hunting, and some students' low enthusiasm and initiative. In view of these problems and shortcomings, the college and teachers work closely together and take targeted measures to enable these students to basically complete their tasks smoothly.

3 students:

According to the requirements of the notice, we randomly selected 1/4 of all students, and our college decided to randomly select 1 students' thesis materials in each class for inspection. * * * We randomly selected six pre-graduate documents, including: approval form for topic selection, task book, opening report, literature review, foreign language translation, and interim report (students). The literature and reference materials are fully searched, the literature review writing meets the requirements, and the opening report is basically standardized. Judging from the contents reflected in the tutor's mid-term checklist, most students are serious and enthusiastic, and the progress of students' thesis writing is normal. They basically completed more than 8% of all tasks and found no plagiarism. This reflects that the overall situation of graduation thesis work is good, and the attitude of most instructors and graduates is serious and responsible, which ensures the smooth progress of graduation work and the quality basically meets the requirements.

However, there are also some incomplete materials of individual graduates in the inspection, which need to be further supplemented and improved.

(ii) Seminars for teachers and student representatives

The expert group convened 8 graduation thesis instructors and 15 student representatives to have a discussion and listen to the opinions of teachers and students.

Students' opinions and suggestions on this graduation thesis.

Teachers are basically satisfied with the organization and leadership of this year's graduation thesis, and think that it is more orderly in organization and management than the previous two graduation thesis work. The students are basically satisfied with the workflow arrangement and organization of this graduation thesis, and think that the instructors are generally responsible, and some teachers are very serious in their guidance.

The opinions and suggestions of teachers and students on the graduation thesis work at the symposium mainly include the following aspects:

1. The school's paper holiday is inconsistent with the paper flow, so it is suggested that the school make adjustments.

2. Students report that there are too few professional foreign language materials in the school library, and it is too difficult for students to find materials. It is suggested that schools increase investment in this area to provide convenience for students.

3. The funds allocated by the school for thesis guidance are too small, and some work is difficult to carry out. I hope the number of schools will increase appropriately.

Four. Achievements and existing problems

Through this self-examination, our hospital has made certain achievements in the following aspects:

1, the management is more standardized.

2. Instruct teachers to be more serious and responsible.

3. Students' attitude is more positive, and the quality of papers is also improved.