Tools: paper, pencil, low-viscosity adhesive tape, marker, marker, hair dryer.
Steps:
1. Draw a long bar with a pencil first.
2. Seal the surroundings with paper tape.
3. Then start painting with the lightest color CG020, determine the depth direction, and draw with a brush, which is easier to be even. This layer is the initial brush color, which is relatively shallow and can be superimposed repeatedly. Basically, the gradient of this layer can be drawn evenly.
4.CG040 is used on the second floor. When the color transition is uneven, we draw it like this first.
5. Then connect the transition with CG020 and wash the light color with dark color, so that the transition will be more natural.
6. If you still feel uncomfortable, you can also use No.0 ink, which is a transparent filling liquid.
7. Then use CG050, that is, light color and dark color, to adjust according to the feeling of the picture.
8. CG070 is the deepest. When depicting objects, there are fewer and fewer dark areas.
9. I feel no problem. You can tear off the tape and slow down.
10, you can blow the picture dry with a hair dryer to reduce the color penetration, and then use the No.0 marker to wipe it a little outside the diffusion edge, or use light color to wash the dark color.
1 1. Although it can't be thoroughly cleaned, it has a good effect at present. This method can also be used in other places.
12, and then draw a gradient from blue to red to yellow.
13. First control the pen power from one side, from shallow to deep, and then color it in turn. The flat pen is used here, and you can clearly feel the unevenness of the painting.
14, determine the depth of the three colors, and then wash the light color with dark color. Compared with soft-headed marking, hard-headed marking is not very good at such a unified transition level. If you are skilled and patient, there is no big problem.
15, almost. At this time, further adjustment is made in combination with colored lead. Colored lead and marker are almost a perfect match. When painting colored lead, try to control the direction and don't scribble everywhere. Colored lead with strong coverage is easier to adjust the color uniformity. Adjust it and close the edges.