Another graduation season. Here I provide you with the standard format of the graduation thesis of college Chinese medicine. The standards are very detailed and students can learn from them.

With regard to the stylistic knowledge of graduation thesis, the relevant matters of graduation thesis are hereby notified as follows:

In order to standardize the writing of graduation thesis (design) in our university and ensure the quality of graduation thesis (design) in our university, the Basic Specification for Graduation Thesis (design) Writing in China Agricultural University is formulated, hereinafter referred to as the Specification. Teachers must guide students to write graduation thesis (design) according to the requirements of this specification, and students must write graduation thesis (design) according to the requirements of this specification.

First, the graduation thesis (design) text structure specification

1, content structure of graduation thesis (design)

(1) Chinese and foreign abstracts should briefly describe the main contents and characteristics of this article (design), and the text should be concise and clear. The Chinese abstract is about 300 words, and the foreign abstract should not exceed 250 substantive words; Keywords should conform to the subject classification, generally 2-4 are appropriate, each word is a professional noun (or phrase), and one word is within 6 words. The content of Chinese and foreign keywords corresponds.

(2) Content: List the introduction, chapters and first-class titles of graduation thesis (design) in detail, and indicate the page number.

(3) text (science and engineering, etc. ) including the background, scheme demonstration, process (design or experiment) discussion, result analysis (including technical and economic demonstration), conclusion or summary.

Project background: explain the source, purpose, significance, main problems to be solved and technical requirements to be achieved; Briefly describe the development status and existing problems of this topic at home and abroad, as well as the guiding ideology of this design.

Scheme demonstration: explain the design principle and selection scheme, and make clear the reasons for choosing this design scheme (including the analysis and comparison of various schemes) and the characteristics of the adopted scheme.

Process (design or experiment) elaboration: refers to the author's detailed description of his research work. It requires a true reflection of the research process, correct reasoning, sufficient arguments, strong logic, clear hierarchy and accurate expression.

Analysis: qualitative or quantitative analysis of the main data and phenomena obtained in the research process.

Conclusion or summary: summarize and synthesize the whole research work, and explain the conclusion, existing problems and opinions and suggestions for further research.

Note: liberal arts and other disciplines can formulate unified text structure norms according to the characteristics of the discipline and referring to the above structure.

(4) References: List the documents related to graduation thesis (design) and write them in standard citation format.

(5) Acknowledgement: Briefly describe the teachers and classmates who supported the graduation thesis (design).

(6) Appendices include unnecessary charts, computer programs, calculation books, operation results, test accuracy of main equipment and instruments, etc.

2. Workload requirements

(1) The number of words in the paper (design specification) should not be less than 10000 words;

(2) In principle, read more than 10.

3. The basic requirements of typesetting

(1) directory format

The format is as follows:

record

Chinese abstract? English abstract? Second order? Three quotations 1

1、×××××× ? four

1. 1××××× ? 4 ? 1.2×××××× ? 10

2、×××××××××××× ? 18

Knot? Language 1 13 Reference 1 15 Thank you? 1 18 attachment ............................................. 12 1

(2) Writing norms

(1) paper format and core

Paper size: 2 10mm×297mm(A4 paper);

Core requirements: left margin: 30mm, right margin: 25mm, and upper margin: 30mm; Bottom margin: 25mm, header margin: 23mm, footer margin:18mm; ;

② Title

Thesis title:

The title of the paper is bold, No.3 or 16pt, and the spacing between the first paragraph and the second paragraph is 1 line.

Chapter title:

The thesis is divided into three titles:

First-level title: bold, No.4 or 16pt, and the spacing between paragraphs before and after 1 line;

Second-level titles: bold, small four or 14pt, and the spacing between the front and back paragraphs is 1 line;

Third-level titles: bold, small four or 12pt, and the spacing between the front and back paragraphs is 1 line.

The spacing between the preceding and following paragraphs can be adjusted appropriately to control the proper page-changing position of the text.

For example:

1 ? Materials and methods (1 level title 4, bold)

1. 1 ? Test materials (secondary title, small size 4 in bold)

□□□□□□□□□□□

1.2 ? test method

1.2. 1 experimental design (level 3 title, bold No.5)

□□□□□□□□□□□□□□□□□□□□□。

1.2.2 Instruments and medicines

□□□□□□□□□□□□□□□□□□□□□。

③ Text font, header and footer

Text font: the text adopts No.5 Song style, and the line spacing is 18 points; The titles of figures and tables are in small five bold letters; The words and legends in the table are described in small five-song style; The notes on the table are in Song No.6 style.

The text of the header and footer is a small five-song style, with the title "Bachelor's Degree Thesis of China Agricultural University" on the left and (3 kg) on the right; For single-sided printing, the page numbers are arranged in the center of the footer, and for double-sided printing, the page numbers are arranged on the left and right sides of the incision respectively.

In foreign languages, symbols of physical quantities and letters of mathematical variables are in italics, letters of units of measurement are in orthography, and letters of other contents are in orthography. English and Roman characters generally use the new Roman orthography of time.

(4) the requirements of drawings and charts

The figures listed in this paper should be carefully selected, and the photos should not be pasted directly, but should be scanned and inserted in the form of pictures. The layout of drawings and charts is reasonable and neat, the line thickness is uniform, and the labeling is standardized and accurate; Engineering drawings must be drawn according to national standards or engineering requirements. See the annex for other detailed requirements.

(2) References

In order to reflect the true and extensive scientific basis of the manuscript, reflect the author's rigorous scientific attitude and respect for other people's research results, and facilitate readers to retrieve and consult relevant materials, the manuscript should record relevant reference manuscripts in accordance with the norms. References are usually recorded in two ways: sequential coding system or author-published system. This specification stipulates the sequential coding system, that is, where references are quoted in sequence in the text, the serial numbers of references are indicated in the upper right corner of the text [], and a bibliography is compiled in the order of references after the text, and the serial numbers in the bibliography are consistent with those in the text [].

The descriptions of references are arranged in the order of description/title/publication.

Periodical: author, title, periodical name, publication year, volume number (issue number): starting page number.

Book: author, title and edition (the first edition is not marked). Place of publication: publisher, year of publication. Starting page number (optional).

Note: Refer to the national standard GB/T77 14-2005 of People's Republic of China (PRC).

(3) The cover design of graduation thesis (design)

The cover must use the paper and style specified by the school.

Second, the implementation of the basic specification requirements

1, graduation thesis (design) instructor and defense team, responsible for organizing the review of the basic specification requirements of graduation thesis (design) of students in this unit.

2. The review of the basic specifications of graduation thesis (design) is completed before the graduation thesis (design) defense. Those who pass the review can participate in the defense only after being signed by the instructor. If the paper does not meet the requirements of this specification, it should be revised and can only participate in the defense after it meets the requirements.

3. Students who participate in the defense should submit papers or design instructions that have been audited and bound by their tutors.

After the paper is finished, it must be bound in a binder in triplicate!

;