Without diamond cabinets, the indoor space in my kitchen is not large. According to the designer's proposal, a diamond cabinet is built in the corner area to improve the space utilization, which is beautiful and easy to use. But fully considering the cost budget and my own usage habits, I didn't choose the diamond cabinet, just let the store add hinges and make a linkage cabinet. Open the door with a large angle of view, very smooth; The internal structure is multi-layered and staggered, and the volume is very large. Usually put kitchen utensils, there is no pressure at all!
If you don't want to work hard, you should definitely put more space in the corner area, and put a good cart with higher specifications every day to store things, which is flexible and saves space. The key is high cost performance.
Basket-pulling without seasoning is assessed as a necessity for kitchen cabinets, but I think the flexibility of traditional basket-pulling is poor and the engineering cost is high. So when customizing cabinets, give up seasoning baskets, use the money saved to buy materials and make your own baskets. Although the production process is very complicated, the actual effect is good in the end. Sliding door application, no matter how wide the wooden cabinet is, you don't have to lower your head to take it. It can be disassembled and adjusted as needed, which is much better than traditional basket pulling!
Tips for self-made basket pulling: ① Measure the specifications of kitchen cabinets accurately in advance, and select guide rails and basket pulling in proportion. (2) Be sure to remember that there should be a gap between the top and bottom, which is conducive to the basket theme activities in the middle and late period. ③ Basket materials are plastic products, stainless steel and wrought iron. Try not to buy plastic turnover baskets, which have low durability; There are standards for buying stainless steel plates, and the cost budget is not enough to choose wrought iron accessories.
Don't extend the basement near the kitchen exhaust area, simply extend the basement to be flush with the exhaust pipe, which takes up a lot of indoor space. A more standard formulation is to make a smoke exhaust cabinet with the same thickness as the ground cabinet. Several places have indoor space for storing spices, which is small but handy.
Don't be an open high-cabinet discharger. Many experiences shared online say that it is more appropriate to make an open high cabinet for the restaurant kitchen and put small household appliances. This is really effective, but the opened box will always be stained with oil stains and dust for a long time, which looks extreme and actually leaves hidden dangers of environmental hygiene and safety. In my opinion, kitchen appliances can be hidden in the cupboard, so they must not be placed on the countertop! So the boxes are all closed and look clean and tidy. If the cost budget is sufficient, it can be made into a high cabinet with Optimus Prime frame structure, with doors on both sides and sliding doors in the internal structure, which has a large storage capacity and stronger application.
No water stop can prevent water leakage, but the most important thing is to block the gap between the kitchen cabinet and the wall. There is an inconvenience in making inclined water strips: the stains on the potholes are too dirty and the cleaning burden is too heavy. Cabinet customization, I specifically asked the master, he said that he didn't want to make a water stop, and he could buy better glue at the edge, so I chose structural glue. I have to admit that the desktop looks fresh without waterproof strips, and it is no problem to use at this stage. If you don't like water strips, why not try a design scheme without water strips to reduce cleaning blind spots.