1. How are the references and acknowledgements in the paper set in the catalogue?

References and acknowledgements cannot be generated because you put them in endnotes. The table of contents can only be generated in the body (including the title), and the solution is simple.

All you need to do is enter the word "reference" before the delimiter of the endnote, then leave the 1 box blank, and click "Insert"-"Delimiter"-"Click" on the first 1 page of section break type, and then "thank you" will be automatically assigned to the next page 1. Then mark references and acknowledgements with 1 title, and then right-click "Update Contents" in the table of contents and select "Update Contents".

The generation of "1" is because you didn't go your own way, so the whole "1" will appear. The solution is just to separate the "abstract" into 1 lines.

2. How to add a thank-you list of papers?

Well, I'm also doing a paper, looking for some information. You can do it. It's quite troublesome.

The format of the paper requires that the references should follow the text, and the references should be followed by explanations, appendices and acknowledgements, while the endnotes of Word are either at the end of the document or at the end of the section, which do not meet our requirements.

This solution seems a bit clumsy. First, delete all the numbers in the endnote text (it is unnecessary because of the wrong format), then select all the endnote text (reference text), click Insert | Bookmark, name it "reference text" and add it to the bookmark. In this way, all the references are collected. Create a new page titled "References" after the text and format it. Move the cursor under the heading, select Insert | Cross Reference, select the reference type as bookmark, click the reference text and insert it, thus copying the reference text. Select the newly inserted text, modify the font size according to the format requirements, and automatically number it with the item number.

At this point, we are almost perfect. When printing a document, the endnote page will also be printed, which is not needed. Of course, you can't print the last few pages by setting the page number range. Here's another way. If you want to know more, please continue reading.

Select all endnotes, click Format | Font, change to hidden text, switch to normal view, and then select View | Footnote. At this point, all endnotes appear at the bottom of the window. Select the endnote separator in the endnote drop-down list box to delete the default horizontal line. Delete "Endnote Continuation Delimiter" and "Endnote Continuation Mark" in the same way. Delete the header and footer (including the separation line), select View | Header and Footer, delete the text first, then click the Page Setup button in the header and footer toolbar, and click the border in the pop-up dialog box. On the Page Borders tab, the border is set to None, and the application scope is this section. The border of the border tab is set to none, and the application scope is paragraphs. Switch to the footer and delete the page number. Select Tools | Options and confirm in the Print tab that hidden text will not be printed (Word default).

Ok, try to print the page where the endnotes are located. Is it blank? !

Or in my way, it's much the same, and I feel it's more convenient without bookmarks:

Copy and paste the quotation into a new word first, and you will find that the previous serial numbers have all become 1. You need to manually change it to 12345 according to your original number. .. and then brush it according to the format of references in the original paper.

Then copy this part to the back of the paper.

Next, select all the original references in the paper and hide the fonts.

In this way, you can insert a page break after the reference. Next, the appendix, thanks and resume each take several pages.

Finally, the directory is generated together.

3. Why can't we automatically generate thanks in the table of contents?

Thanks can't be generated automatically in the table of contents, because you can't use the function of inserting endnotes and then inserting text after endnotes to generate tables of contents. There are several ways to generate acknowledgements in the table of contents: if references are added to the paper in the form of endnotes,

I want to add thanks and appendices to the references.

I can't join anyway.

Because they all default to endnotes.

And it won't appear in the catalog.

Big head. Big head.

Here's a stupid way: one: copy the quotation.

Paste it before the original reference. At this time, you will find that the newly posted reference numbers are out of order.

Don't worry.

Just be patient and modify it manually.

(The original references should also be retained. Otherwise, the consequences will be serious.

) 2: Set the copied "Reference" as "Title 1", and then paste the receipt and appendix after the new reference.

Third, hide the original reference in the form of "format-font-hidden font". Four: update the directory.

Thanks and appendices appeared.

Is there wood? .

4. How do 4.Word 20 10/0 add a thank-you directory?

The following operations are all operated in one document, that is, a single file uses multiple headers and footers (including page numbers) at the same time:

1. Stay at the end of the directory and insert the separator: tab page layout → separator → section break next page.

2. Place the cursor on the first page to be numbered and edit the footer. On the Header and Footer tool tab, by default, linking to the previous header is enabled, and it will be disabled after clicking, so that you can set a footer different from the previous content, such as customizing to insert pages and titles with different formats.

3. Insert the page number in the required page and set the page number format → at least the page number is 1.

4. If the page number has been inserted in the cover and table of contents before, you can delete the page number of the previous page directly after the above operation.

5. How to add abstracts, acknowledgements and references to the automatically generated catalogue?

How to add abstracts, acknowledgements and references of papers in the method of automatic table of contents generation?

Please refer to the following:

1. Click to enter the endnote setting page, as shown below.

2. Set endnote, select the end of the section, and then click Apply, as shown below.

3. Therefore, endnotes will be generated at the end of this section.

4. Click the chapter navigation to see how many chapters there are in the article.

5. Find the directory that knows the end of the chapter, move the cursor to the previous chapter, click the separator, and divide it into the next page. You can use the same method to refer the table of contents and the previous section of the table of contents to a paragraph and delete the extra spaces.

6. It is divided into four sections, the middle section and the reference section.

7. Find the part where the reference is located, and click Merge to the front part to make the operation a part until the middle part. References are followed by documents where separators can be inserted.

6. Graduation thesis

Neither of us is happy-by the end of the day, I found the master's answer. You should try it.

Note 1 Misunderstanding: If the endnote is set to "at the end of the document", then no matter how many carriage returns are added after the endnote, the contents after the endnote are endnotes and cannot be used as the endnote directory.

Method of adding blank pages after endnotes

Pay attention to a knowledge point: section-different sections, you can set different headers and footers, set different page settings, add sections, and click Insert-Delimiter-section break-Next Page/Continuity.

Therefore, in the case that the landlord did not add a section in the process of writing the text, that is, the text of the paper was in the same section, at this time,

1. Before the endnote, click Insert-Delimiter-section break-Continuous at the end of the file.

2. Click Insert-Quote-Endnote and Footnote-Endnote in the position just now, select "Section End" and click "Apply". At this point, the endnotes will follow the chapter of the text, not the end of the whole document.

3. In the same position just now, click Insert-Delimiter-section break-Next. At this time, the next page is blank, but another section, you can write something, and what you write has nothing to do with the endnotes.

Also, when I generated it, I also showed the whole paragraph. Please try to lower the title level by one level, which seems ok. In addition, format all the ungenerated text parts as text, and then try again.

7. How are the references and acknowledgements in the paper set in the catalogue? 3Q, please

References and acknowledgements cannot be generated because you put them in endnotes. The table of contents can only be generated in the body (including the title), and the solution is simple.

You just need to type the word "reference" before the delimiter of the endnote, then leave the 1 box blank, click "Insert"-"Delimiter" to ask about "section break Type", and click 1 page "Confirm". "Thank you" will be automatically assigned to the next answer 1. Then mark the references and acknowledgements with 1 title, and then right-click "Update Table of Contents" in the table of contents and select "Update Contents in Table of Contents".

"1" came into being because you didn't go your own way, so the generation of "1" came into being. The solution is just to separate the "abstraction" into 1 lines. View the original post >>.