Step 1: Site Selection
The solar water heater in the greenhouse should be located in a sunny place, as far away from trees or high walls as possible. At the same time, it is necessary to avoid installing the water source too far away from the solar water heater in the greenhouse to ensure sufficient and stable water supply.
Step 2: Install the bracket
Before installation, the bracket should be prepared in advance, and the bracket and frame should be fixed on one side or top of the greenhouse. The bracket should be firm and stable to fix the main body of the solar water heater.
Step 3: Fix the water tank.
Install the main body of the solar water heater on the bracket according to the instructions, and install all accessories. The water tank is fixed at the lower part of the main body of the solar water heater for storing hot water.
Step 4: Connect the pipes.
A water inlet pipe and a water outlet pipe on the main body of the solar water heater are respectively connected with a water inlet and a water outlet on the water tank, and are connected with a water source and a hot water supply system through pipelines.
Step 5: Trial operation
After all the steps are completed, start the system for trial operation and check whether there is water leakage or other faults. After inspection, the system runs normally, and the solar water heater in the greenhouse can be used to provide hot water.
The above is the installation method of solar water heater in greenhouse. In the installation process, we must pay attention to ensure the normal operation of the system, which can not only improve the efficiency of energy utilization, but also protect the environment and play a dual role.