Safety is no small matter, so we should firmly establish the idea of "safety first, prevention first" and raise safety awareness. Safety summary can summarize the gains of safety work. Come and write an article. Whether you are looking for or preparing to write a personal summary of rural drinking water safety work, I have collected relevant materials below for your reference!
Personal summary of rural drinking water safety 1 I am engaged in the supervision of production safety for 20__, and I always adhere to the requirements of "never stopping, never ending, always being alert and implementing everywhere" in my work. According to the relevant documents and the spirit of important meetings, combined with the actual situation in our region, we will comprehensively promote the responsibility system for target management of production safety, establish and improve the management mechanism of production safety, carry out publicity and education on production safety, deepen special rectification, and strengthen supervision and inspection of production safety. It was rated as an advanced individual in production safety by xinzheng city Municipal People's Government, and as an advanced individual in production safety and an advanced individual in production safety month by Zhengzhou Municipal People's Government. The work in 20__ years is summarized as follows:
First, the specific practices and effects of safe production
20__ years, according to the needs of work, in charge of emergency management, investigation of major hidden dangers, registration and filing of major hazard sources, and safety production month. Under the leadership of all levels, the whole region closely revolves around the theme of "safe development and scientific development", adheres to the principle of "safety first, prevention first and comprehensive management", and initially forms a supervision and management system of "classified management, graded responsibility, compartmentalization and territoriality first" in accordance with the unified arrangements of the state, province and city, establishes supervision and management institutions, strengthens the construction of emergency support potential,
Two, strengthen business knowledge learning, and constantly improve the regulatory potential.
Since taking office, I have been able to study policies, regulations and business knowledge attentively, pay attention to the accumulation of knowledge, strengthen my study after work and life, master the knowledge of safety supervision, and improve the supervision potential. First, we have carefully studied the Law of People's Republic of China (PRC) on Work Safety, the Regulations on the Reporting, Investigation and Handling of Work Safety Accidents and the Regulations on Work Safety in Henan Province, which have deepened our understanding of laws and regulations and greatly improved the potential of handling affairs according to law. Second, conscientiously study and implement the spirit of the higher-level documents, and formulate specific work implementation plans in light of the actual situation in our region.
Three, the implementation of production safety responsibility, establish a long-term management mechanism.
In order to effectively do a good job in production safety, ensure the safety of people's lives and property and the normal production and operation of enterprises in the whole region, under the correct leadership of the District Committee Management Committee, the work of production safety closely focuses on the work plan formulated at the beginning of the year, highlights the key points of supervision, and does a good job in the following aspects:
1. Establish the responsibility system for production safety, and clarify the safety responsibilities. The responsible person is clearly in place, and the top leaders of offices, enterprises and related units are clearly defined as the first responsible person. Whoever has a problem is responsible.
2. Establish a long-term mechanism for the investigation and management of hidden dangers in production safety, further strengthen the thematic responsibility for the investigation and rectification of hidden dangers in production safety, effectively prevent and reduce accidents, and ensure the health and property safety of employees.
3. Formulate the emergency rescue plan for production safety accidents in the whole region, and predict the basic situation of production safety work and possible production safety accidents in the whole region, which will play an intentional role in dealing with hidden dangers of safety accidents and reducing accident losses to a minimum.
4, supervise the rectification in place, to report the hidden dangers in production safety check one by one, found the problem, immediately rectification. If the rectification cannot be made within a time limit, the work of safety in production will not be effectively consolidated.
Fourth, increase publicity and raise awareness of safety in production.
1, do a good job in the publicity and education of "Safety Production Month". Organize publicity activities with the theme of "scientific development and safe development". The participating units spread the laws, regulations and safety knowledge related to safety production to the general public through exhibition boards, posters, publicity materials and on-site explanations around safety knowledge closely related to people's production and life, such as fire fighting, road traffic, buildings, campus, gas, electricity and special equipment. Distribute more than 5000 leaflets and more than 20 brochures. More than 20 people visited the site for consultation. The activity achieved good publicity and social effects, strengthened the safety awareness of the whole people, and created a public opinion atmosphere of "scientific development and safe development".
2. In order to fully implement the "People's Republic of China (PRC) Law on Work Safety" and the "Provisions on Safety Training of Production and Business Units", we will further strengthen the safety management of enterprises and improve the quality and level of the principal responsible persons and safety management personnel of enterprises. Organize enterprise principals and safety administrators to participate in safety production knowledge training courses, so that everyone can further study safety production-related policies and regulations, improve the professional quality and safety awareness of enterprise safety production managers, and further standardize safety production management measures.
Five, integrity, establish a good personal image.
In practical work, we insist on not abusing power for personal gain, not accepting bribes, not trading power and money, not practicing favoritism, not speculating and profiteering, and not going through the back door. Don't do things that violate discipline and law, and be spotless. To achieve this, I have mainly achieved three points: First, I have been constantly studying anti-corruption and promoting honesty, comparing positive and negative examples, seriously reflecting, sounding the alarm, and trying to overcome hedonism, money worship and extreme individualism. Second, major issues concerning the overall situation and hot and difficult issues of concern to the masses should be reported to the leaders in a timely manner, which should be studied and decided by the leading bodies, and then implemented according to them, and they should not be arbitrary.
A brief review of the past year's work is to stand on the post, do your job, love your job, be conscientious and specialize in your job. Take self-ordinary work as the starting point of serving the masses. In the work, strive for the first-class level, resolutely follow the requirements of the party, maintain a high degree of consistency with the party, know the general situation and take care of the overall situation, stress party spirit and dedication in study, work and life, establish a diligent and honest government, be indifferent to fame and fortune, be persistent in the cause, and be diligent and love the people.
Personal summary of rural drinking water safety work 2 1. Leaders attach importance to it and take appropriate measures.
Project leaders attach great importance to safety production management. In order to strengthen the safety production management, the project department set up a safety management leading group headed by the project manager, set up a full-time safety director and an independent safety management department-the Safety and Environmental Protection Department, and equipped with a full-time safety officer to be responsible for, organize, implement and improve the safety production management. The project department established an occupational health, safety and environment supervision and management system at the beginning of its establishment. The Safety & Environmental Protection Department realizes the overall control of project safety through daily inspection, regular and irregular special and comprehensive inspection, and ensures the realization of occupational health and safety objectives and environmental objectives.
Two, the annual work plan, improve the system and procedures, signed a letter of responsibility.
According to the relevant documents of the company and its subsidiaries, the project department has worked out the work plan for safe production for 20__ years in combination with the actual situation. According to the plan, the project department constantly improves and revises various systems and procedures. At present, the project department has _ _ items of various rules and regulations and _ _ items of various safety operation procedures.
In order to strengthen the safety production management and implement the responsibility system for safety production, the project manager and the general manager of the branch, the project department manager and the heads of various departments and offices, the heads of various departments and offices and the staff of the headquarters and the construction team signed letters of responsibility layer by layer, and all major construction sites and construction teams were equipped with part-time security officers to effectively monitor the major construction sites. At the same time, according to the provisions of the safety production plan, the safety investment plan is compiled, and various safety production accident plans are compiled and trained in combination with the identification of dangerous sources in the construction process.
Three, regular safety meetings, safety training, and actively carry out various activities.
1, safety meeting
The project department holds monthly leading group meetings, special meetings or regular meetings. At the meeting, the preliminary safety work was summarized, the next stage work was arranged, the safety production situation was summarized and checked, the main problems existing in safety production were studied and solved, the safety production work was arranged, the research was concentrated, and the safety technical scheme and measures were formulated, so as to find, prevent and solve problems in advance.
2. Safety training
Make a safety training plan, establish employee safety training file cards, and regularly conduct safety training for project managers, special operators, full-time security officers and general operators. Through various trainings, people's awareness of safety has been improved, their sense of responsibility has been enhanced, and a strong atmosphere of safe and civilized construction has been created, thus improving the safety and civilized construction awareness of all employees.
3. Safety activities
In addition to carrying out a series of safety inspection and safety training activities independently, the project department also conscientiously implements the spirit of various documents and responds to the call of the head office and branches to carry out various activities. Such as "Safety Month" start-up and signing ceremony, issuing safety leaflets, safety essays, safety speeches, lectures on dangerous sources, "Q&A", safety inspection and other activities, and organizing teams to hold regular safety group meetings and put them on record. Through the development of various activities, the awareness of safety has been improved, the sense of responsibility has been enhanced, and a strong atmosphere of safe and civilized construction has been created, thus improving the safety and civilized construction awareness of all employees. Four, the implementation of special safety management, technical disclosure on a regular basis.
Adhering to the policy of "safety first, prevention first and comprehensive treatment", the project department has formulated corresponding safety management systems and plans for fire protection, transportation, special equipment, flood control, safe electricity use and occupational disease prevention, and designated special personnel to manage them, with the responsibility to the people.
The project department has formulated the technical disclosure system for safety production and the technical disclosure system for construction. Before the project construction, the safety disclosure and construction technical disclosure shall be made to the management personnel of the project department and the operators of the construction team, so that the construction personnel can have a certain grasp of the hidden dangers and main risk factors in the construction process, and have a certain understanding of the key and difficult points, construction organization, new technologies, new materials and new processes adopted at the site.
Fourth, strengthen inspection and do a good job in safety management.
In order to enhance the safety awareness of all kinds of personnel in the project department, relevant national regulations, norms and technical standards, and further improve the management level of engineering construction, full-time safety officers in the project department conduct daily inspections on the construction situation, and organize comprehensive inspections and special inspections regularly and irregularly. It has achieved timely discovery of hidden dangers and timely rectification.
In order to effectively control and eliminate all kinds of accidents in the construction process, the project department organizes personnel from various departments such as engineering technology, safety and environmental protection to identify the hazards on site according to the construction process and characteristics, formulate corresponding control schemes for the identified major hazards, and designate special personnel to be responsible, strengthen the monitoring and dynamic management of hazards, and do a good job in safety management.
The Project Department organizes the Safety and Environmental Protection Department and ZuoYeDui to conduct joint acceptance of important parts and processes such as earthwork excavation and scaffolding of foundation pit, and timely rectify the hidden dangers found in the acceptance.
Five, formulate emergency rescue plans, and conduct training and drills.
In order to effectively deal with all kinds of accidents and reduce casualties, property losses and environmental pollution caused by all kinds of production accidents, the project department has formulated various emergency plans according to the actual situation. At present, the plans formulated by the project department include: emergency plans for production safety accidents, emergency plans for drowning, emergency plans for flood control, and emergency plans for heatstroke prevention and cooling in summer. According to the characteristics of the project, fire drills, drowning drills and flood drills were carried out.
Through training, we have made clear our tasks and responsibilities in the event of an accident, improved our safety awareness and mastered the skills of accident control. Through the drill, everyone's coping ability was enhanced, and the command ability of the project leader and the coping ability of personnel and equipment were improved. At the same time, according to the drill, the project revised the plan in time to enhance its execution and operability.
Six, strengthen the project safety and civilized management, and strive for civilized engineering.
The project department strengthens the management of on-site safe and civilized construction, formulates the safety investment plan, increases the safety investment, formulates the safety work plan at the same time, carries out the work in strict accordance with the work plan, identifies and evaluates various environmental factors, formulates the environmental protection plan and environmental protection implementation rules, and decomposes the safety and environmental protection objectives and occupational health objectives into various departments. Control the noise and dust on the site, clean the enclosure regularly and clean the site sanitation. Check the site and environment of the project department every month to ensure civilized construction.
7. Establish an information management system to ensure dynamic real-time control.
According to the requirements of the company and its branches, the project department has established a safety information management system, equipped with full-time safety information officers, and timely input safety information. At present, nearly _ _ pieces of various information have been entered. And timely report to the company and the owner the monthly safety production situation and hidden danger investigation situation.
Eight, actively cooperate with the inspection and acceptance work, timely and conscientiously complete the rectification, and comprehensively improve the management level.
Since the project started, not only the sub-bureau, the General Administration and the group company have carried out many safety inspections on the project department, but also the owner's supervision, the local competent department and the superior competent department have come to inspect it many times. We all attach great importance to the problems found in the inspection. We promptly convened relevant departments to hold a meeting to report and study, formulate rectification plans and measures, carry out responsible units and persons, supervise and inspect the implementation of rectification, and report the rectification results to higher-level relevant units in time, which played a powerful role in standardizing and improving the construction management behavior of all contractors and improving the project quality.
The year 20__ is coming to an end. Under the leadership of the project management team, through the implementation of a series of safety measures, the project safety work has achieved good results: the signing rate of the project department's safety production responsibility book is 65,438+000%, and the certificate rate of special types of work and safety personnel is 65,438+000%. Since the start of construction, the project department has not had any production safety accidents, workers' health accidents, fire and explosion accidents.
Personal summary of rural drinking water safety III. Everything is long, system first, safety first, quality first. This is the starting point of all my work this year. Plan-oriented, manage the whole process, and annotate the results with benefits. I am in charge of construction management, safety production, quality control, planning and statistics, maintenance and return visit in the department. The following is a summary of my personal work in the past year.
First, establish rules and regulations and clarify responsibilities.
Soon after the company's operation, with the support of the leaders, the department arranged the work for the whole year. At the professional meeting, the company leaders signed a safety responsibility certificate with the principal of 1 1 to implement the safety responsibility. Various rules and regulations have been established and improved. Referring to the project management manual, safety liability form, quality excellence and other materials, we have successively formulated and issued two management regulations, such as safety inspection system 12, to standardize the organization and project management, and fundamentally straightened out the relationship between the responsibilities and rights of the company and the project management department, so that the company's daily construction and production work can be carried out in an orderly manner.
Second, the planned construction of civilized production
Comparatively speaking, the production task structure of Division 2020 is more reasonable. Of the six projects under construction, this project is under construction in the basement, and the first two projects are under construction in the main body. And _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ With the care and help of the superior leaders and the joint efforts of all the staff, _ _ has completed the construction production output value of 360 million yuan, including 223 million yuan, and there are four projects under construction at present, with a construction area of 251130m2; 2 completed projects with an area of 94,733 ㎡.
Entrusted by the leader, I am responsible for the construction and production of the company. Starting from the construction scheme, under the leadership of the company team, with the cooperation and support of government departments, we have done some work on various construction projects. Adhere to the monthly safety inspection and production scheduling, assist the project to solve the problems existing in production, and always go to the construction line with quality and safety problems as soon as possible to ensure the smooth progress of production.
While grasping production, I pay great attention to the civilized construction on site. Because it is not only the image of an enterprise, but also enhances the visibility of the enterprise and creates a harmonious construction environment for the project. Therefore, in the monthly inspection and patrol, civilized construction is placed in a very important position, and actively assist the project to carry out ci excellence activities.
Three-dimensional protection of safety precautions
Adhere to the project construction inspection, from 18 to 20 every month, the safety management personnel of the company department will pay special attention to the inspection at different stages of each project according to the actual situation; In the third month of each quarter, organize a project construction inspection team attended by engineering, materials, finance, comprehensive and other departments to conduct a comprehensive inspection of the projects under construction focusing on safety production. The important facilities such as scaffolding, grid frame, tower crane, aerial work, "three treasures and four mouths", border defense, construction electricity and so on were inspected.
Before this year 1 1 month, 44 rectification notices were issued, and rectification measures were put forward 192, with a cumulative fine of 5 188 yuan. Correct the illegal command and operation behavior in the inspection on the spot, find out the potential safety hazard, issue a rectification notice, and make rectification within a time limit. The project responded to all the questions raised by the inspection team and completed the rectification according to the requirements of the rectification notice.
In order to strengthen the unified management of safety work and realize the effective management of safety managers, it is necessary to implement a vertical management system, and holding regular safety meetings is a good way to achieve vertical management. The department has re-improved the regular meeting system of safety classes, and all safety officers hold regular meetings together on the 22nd of each month. The main content is to convey the superior documents and spirit, report the work situation and difficulties, and conduct inspections and exchanges in the project. In this way, the company can know the safety production situation of the project more timely, improve the communication between the safety officer and the safety secretary and the company, and solve the difficulties in the work of the safety officer in time. Make the company's safety work more comprehensive and effective.
Fourth, the professional training of all-staff education.
Strengthening education and training is one of my priorities. In order to improve the safety awareness of all employees of the company and enhance the awareness of creating excellence in engineering quality, our department ordered 7 warning records of major safety accidents in construction projects, 9 sets of building safety publicity wall charts, 35㎡ safety special knowledge exhibition boards, 20 interpretation of building safety inspection standards and other safety education publicity materials, and subscribed to Construction Workers magazine all the year round and distributed them to relevant departments and organs of the project.
In order to speed up the development of the company, change the current situation of talent shortage, adapt to the reality of the company's production and operation, promote the in-depth development of the company's management, adapt to the constant changes in the form of construction technology, face the reality of fierce competition in the construction market, and provide space for the personal development of employees, the company will be turned into a "learning" enterprise, and all employees will be educated and trained by departments and offices, and the company will be built into a school where employees can learn and re-learn. According to the actual construction and production of the company, the project management department was organized to carry out all-staff learning activities, and successively studied the Regulations on Safety Management of Construction Projects, the national standard Ready-mixed Concrete, the Management Regulations on Acceptance of Quality and Technical Data of Completed Projects, the Order of Safety Awards and Punishment, the Management Data Manual of Construction Safety Production Assurance System, and the Road Traffic Safety Law of the People's Republic of China. Good results have been achieved. In the tense daily affairs, take time to study, take the way of going out and inviting in, learn from others' advanced experience and good practices, and improve the management level of the company.
Five, maintenance return visit to achieve a win-win situation
By the end of last year, the company had delivered five projects to the owners. When we handed in the key, we informed the company's maintenance team of the telephone number, repaired the problems in the use process in time, and helped the owner to find ways to solve the practical problems in time, which won the praise of the owner and the competent department.
At the same time, pay three rounds of return visits to all completed project companies as planned, and repair and deal with the existing problems in time. So far, we haven't received any complaints and exposure calls from the owners. Through the above work, we not only fulfilled our responsibilities, but also tasted the sweetness. The owner praised us as an excellent team, which laid a good foundation for our project settlement and subsequent project undertaking.
Six, excellent quality products
In order to further expand the local popularity of the branch, provide strong brand support for the operation, and emphasize the awareness of quality products, the company made clear the goal of creating excellence in engineering quality at the beginning of its establishment, loudly put forward the strategic slogan of quality products, set up a quality committee according to relevant regulations, improved the internal supervision institutions and personnel, and the certified appointment rate of quality management personnel was 65,438+000. In the construction process, the plan was made in advance, and the process control was emphasized. The overall level of the project has been greatly improved, and no engineering quality accidents have occurred. Engineering data and construction progress are basically synchronized, and engineering entities can represent the level of the system. Five engineering subjects were accepted at one time.
Seven, summarize the shortcomings and look forward to the future.
Generally speaking, this year's work, I am conscientious and loyal to my duties. Some achievements, self-evaluation "good"! But there is still a big gap from the expectations of branch leaders.
Personal summary of rural drinking water safety Article 4 This semester, Teacher _ _ and I are jointly responsible for the education and conservation of children in Class 2. Our class has a strong sense of responsibility for class safety, and we clearly know that we must be responsible for the safety of the children in the class.
There were 28 students in our class at the beginning of the school year. Most children have basically had one or two collective life experiences. The child is 3 to 5 years old and has a preliminary sense of self-protection. Only with the growth of children's age, their adventurous spirit is getting stronger and stronger. After a holiday, children's safety awareness has also decreased, so the task of safety work this semester is still very heavy. In order to ensure the safety of children and form their initial safety awareness, this semester, on the basis of the syllabus, taking the Regulations as the guiding ideology, on the basis of kindergarten health and safety work, and according to the age characteristics and actual situation of children in this class, a feasible safety work plan was formulated, and children were systematically educated on safety, and specific contents and measures were formulated to ensure the achievement of the goal.
Four teachers can always cooperate with each other and make sure that two teachers are present when they are outdoors. Even if unsafe factors are found in indoor activities, teachers can stop them in time.
We can also give special care to some special children in our class. For example, children in Guo Shijie, because of their poor eyes, are prone to fall, especially to wet the bed. They help him when he goes out every day, reminding him to go to the toilet regularly after a nap. On the other hand, we told him to be careful, so that he would be better at ordinary times.
Our class focuses on safety education activities every month, such as safety education and guidance for children entering and leaving the park in September and regular training. 10 is a safety education for outdoor activities and the use of large equipment. 1 1 month to carry out health education on coughing and sneezing, and cultivate good hygiene habits of washing hands before and after meals and when hands are dirty. 12 combined with seasonal changes, guide children to know that when the weather is cold, they should pay attention to moderate exercise and take concrete measures to prevent colds in winter. Educate children on infant health and personal hygiene. So there are plans to gradually improve children's safety awareness. In addition, we also pay close attention to the daily routine, including children going up and down stairs, going to the toilet, taking a nap, eating and so on. The teacher made a unified request and insisted on teaching children according to the unified requirements, so that children can form certain daily behavior habits, which is also an important condition to ensure the safety of children in our class.
Safety work is the top priority of kindergarten work. Only under the condition of ensuring the healthy growth of children can teaching activities be carried out smoothly. The teachers in our class always maintain a high sense of safety responsibility and carefully carry out safety work, so that no safety accident occurred in our class this semester, and the safety work ended successfully.