Graduation thesis varies from school to school. I am the academic affairs office system of Xingzhi College of Zhejiang Normal University. Writing requirements for graduation design (thesis) of Xingzhi College of Zhejiang Normal University in July 2009. The Basic Composition of Graduation Design (Thesis) (1) Cover Prefix [Xingzhi College of Zhejiang Normal University, Undergraduate Graduation Design (Thesis) (20th)], Thesis Title, Major, Students (. (two) the graduation project (thesis) text directory; Chinese paper title, author (major, name, student number), instructor (name, title), co-tutor (name, title), abstract and keywords; Title, author's name, names, abstracts and keywords of tutors and co-teachers of foreign language papers; Text; Notes; References; Appendices (attached drawings), etc. (3) Graduation design (thesis) process management material task book, literature review, opening report, foreign language translation and original text, guidance record, mid-term checklist, work (in kind) acceptance form (for some majors), defense qualification examination form, defense record, evaluation form, etc. Each component of graduation design (thesis) requires (1) graduation design (thesis) text 1 thesis title. The topic should be concise and general. Generally, the number of words does not exceed 20, and a subtitle can be added if necessary. Add "long dash" to the "special symbol" before the subtitle and print it in the center under the main title of the paper. 2 abstract. The abstract summarizes the content of the research topic in a concise form, and outlines the research background, purpose, methods, results or main conclusions. It is an independent paper without interpretation and comments, and it is necessary to highlight the creative achievements or innovative opinions of this topic. Generally no more than 300 words. Three key words. Generally, you can choose 3 ~ 6 terms that reflect the main content, and use semicolons. Between every word. Separate, and finally don't punctuate. Four co-mentors. Cooperate with the instructor or assist the unqualified teacher as the instructor. The title, subtitle, author's name, instructor's name, co-tutor's name, abstract and keywords of foreign papers are all foreign language translations of these contents in Chinese. They are all Times New Roman fonts, and the requirements for font size, leading and trailing moments of paragraphs are exactly the same as their Chinese formats. The pinyin spelling of the author's name, the instructor's name and the co-tutor's name is: surname comes first, with spaces in the middle, surname letters are all capitalized, and compound surnames should be combined. Capitalize the first letter of a name and add a hyphen between the two names; First and last names are not abbreviated. For example: Zhang Ying; -Lian (Wang Xilian); Zhuge Hua (Zhuge Hua). Foreign language letters are written in accordance with the provisions of China and relevant international standards. Distinguish between italics, uppercase and lowercase letters and footprints. Words in the text: the words (or printed words) in the main part of the paper should be above 10000 words (some special majors can be adjusted appropriately according to the actual situation, which will be confirmed by the academic affairs office). 7 Title Levels All title levels of graduation design (thesis) should be orderly, neat and clear. The same level should be expressed in a unified way, and the contents under the titles at all levels in the text should correspond to their respective titles, and there should be no contents unrelated to the titles. (1) Grading and numbering standard for text paragraphs of graduation project (thesis): The titles of literature and history are compiled by mixing Chinese characters and Arabic numerals, with the first-level titles being "one", "two" and "three", the second-level titles being "one", "two" and "three", and so are the third-level titles. If there are not many professional titles, you can omit the second-level professional title and promote the third-level to the second-level; ① It should not be used to distinguish it from the number of notes. Or through: Chapter 1, Section 1, I ... or Chapter 1, I, (I) ... Table of Contents Chapter 1 XXXXX .....................1XXXXX ....................... X (I). Five X syndrome ................... X or: directory xxxxx ...................... 1 (1) xxxxx ................. X1xxxxx ................. X directory1 Xxxxxx ...................................11.1xxxxx ................................ x1.1xxxxx ........................ x science and engineering category numbering method adopts hierarchical Arabic numerals. The first level is "1", "2" and "3", the second level is "1. 1", 1.2 "and the third level is"/kloc " The fourth level is "1. 1. 1", "1.1.2" and "1.3". There should be no punctuation marks at the junction of numbers and words, but there should be 1 Chinese character spaces. (2) Text: The first line of the first-level title can be centered or indented; The second level and below are arranged in the order of natural paragraphs, and the first line is indented and returned to the top grid. The row spacing is fixed at 18~22.8. Note that the source must be indicated when quoting other people's viewpoints, statistical data or calculation formulas in the text of graduation design (thesis); If you need to explain something, you can also add comments. A comment is a footnote on the current page, that is, write a footnote label where it is quoted, and put it at the bottom of the manuscript paper where it is commented. The serial number of the bill should be represented by numbers such as ①, ② and ③. Notes on each page should be renumbered. 9 References References are an indispensable part of graduation project (thesis) and are the main references used by the author in the writing process. It reflects the source of graduation design (thesis), the breadth and reliability of materials, and it is also the author's recognition and respect for other people's knowledge achievements. A complete reference can provide readers with valuable information. References are naturally arranged in Arabic characters in the order in which they appear in the text, such as square brackets [1], [2] and [3], and each reference entry ends with ".". The references for graduation design (thesis) should be above 10 (department), including at least 2 foreign languages. Common document type codes: periodicals [J], monographs [M], essays [C], dissertations [D], patent documents [P], newspaper articles [N], reports [R], technical standards [S], compilations [G], etc. The writing format of common references is as follows: periodical: [serial number] author, title [J], periodical name, publication year, volume number (issue number): page number, monograph: [serial number] author, translator, title [M], publishing place: publishing house, publication year: page number. Essay: [serial number] author. Year of publication: page number. Dissertation: [serial number] author. Title [D] Storage location: storage unit, year. Patent document: [serial number] patent owner. Patent name [P]. Patent country: patent number, publication date. Newspaper article: [serial number] author. File title [N]. Name of newspaper, date of publication. Year of publication. Electronic document: [serial number] author. Title of electronic document [EB/OL]. The publication or available address, publication date or update date, ∕ reference date of the electronic document (optional). 10 Appendix: Some contents that are not suitable for the text but have reference value can be included in the appendix of graduation project (thesis), such as formulas. If many symbols are quoted in the article, for the convenience of readers, you can write a symbol description to indicate the meaning represented by the symbols. (II) Graduation Design (Thesis) Process Management Materials 1 The text content is Songzixiao No.4, and the line spacing is fixed at 18~22.2. Translate the original text in a foreign language: you can directly provide the original or a copy (indicate the source of the original text). 3 The opinions (comments) of the tutor, the defense team and the defense committee can be printed or handwritten, and the handwriting must be clear and standardized. 4 "Percent System" is transformed into "Five-level System": Excellent:100 ≥ x ≥ 90; Good: 90 ~ x≥80；; Medium: 80 ~ x≥70；; Pass: 70 ~ x≥60；; Failure: X-60. Three. Basic Requirements for Graduation Design (Thesis) (1) Punctuations Punctuations should be used correctly in accordance with the uniform provisions of the Usage of Punctuations promulgated by the State Press and Publication Administration to avoid misuse and confusion. Special attention: use pause, etc. after the word number "one"; Arabic numerals like "1" are followed by a dot "."; No punctuation is needed after the serial number of brackets, such as "(1)" and "(1)". Non-standard usage, such as "(1)", "(1)", "1." , "1" cannot be used. (2) The use of nouns, nominal names and names should conform to the common usage and idioms in modern Chinese. Professional terminology should use general standards and norms according to the characteristics of disciplines and professional development. Scientific and technical terms and terms should be standardized terms published by the National Natural Science Terminology Examination Committee or names specified in national standards and ministerial standards as far as possible, and common names can be used for names and terms that have not been uniformly specified or whose names are controversial. When foreign abbreviations are used instead of noun terms, their meanings should be indicated in brackets when they first appear. Generally, westerners' names are given their real names in foreign languages, and they are written according to the principle that the first name comes before the last name, such as p.cray, not just cray. Famous foreign names (such as Newton, Darwin, Marx, etc.). ) can be translated according to the usual standard translation methods. The names of domestic factories, organs and units should use full names and cannot be simplified. (3) Quantity and unit quantity and unit must adopt the national standard GB 3 100-3 102-93 of People's Republic of China (PRC) and the international system of units (SI). Units of non-physical quantities, such as parts, units, people, yuan, etc. , you can combine Chinese characters with symbols, such as yuan/km. (4) The measurement and statistical data in the digital graduation project (thesis) are all in Arabic numerals, but when describing a small number, Arabic numerals are generally not used, such as "He discovered two asteroids" and "Three great works work on one point", which is not suitable for writing. The approximate number of people can be chinese numerals and Arabic numerals, such as "/kloc-about 0/50" or "/kloc-about 0/50". The numerals in this paper should use Arabic numerals except some words, phrases, idioms, abbreviations and numerals used as morphemes in structured ordinal numbers and rhetorical sentences. In the same text, the representation of numbers should be consistent. (5) The formula in the formula text should be edited by word formula editor, and the font size should be set according to the aesthetic needs of the text; The numbered formula should be placed in the top box, and the number should be placed on the right side of the formula, enclosed in brackets, and no dotted line should be added between the formula and the number; Example: (1- 1) If there is a description below the formula, write "Note:" in the top box and then write the description. Example: Note: XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXVI (VI) Table Each table should have its own preface and title. The preface and title should be written in the middle of the upper part of the table, and the title should be written in the blank space after the preface. The table is allowed to be written on the next page, the title of the table can be omitted, the header should be written repeatedly, and "Continued Table ××" should be written on the upper right. The tables in this paper should be numbered and named uniformly. The contents in the table should be aligned, and the numbers and characters in the table should not be replaced by "ditto" or symbols when repeated continuously. When the numbers in the table use the same units of measurement, you can take the units out of the table and put them in brackets. When there is a whole paragraph in the table, leave a space at the beginning of the line, go back to the beginning of the line, and finally don't use punctuation. (VII) Illustrations The illustrations of graduation design (thesis) must be made independently, with symmetrical lines and neat and beautiful drawings. Each illustration should have a picture order and a picture title, and be placed in the middle below the picture position. The map should be drawn with ink lines on tracing paper or white paper, or by computer. The attached drawings in this paper should be numbered and named uniformly; Except in special circumstances, computer drawing is required. Table number, table name, table note or figure number, figure name and figure note should be printed above the table and below the figure. (eight) graduation design (thesis) printing paper requires the use of standard A4 type (297mm×2 10mm) printing paper or copy paper. (IX) Page setup undergraduate graduation thesis requires vertical printing, and the margin requirements are: upper (T): lower 2.8cm(b): left 2.8cm(l): right 3.0cm(r):2.8cm binding line (t): 0.5cm binding line position (T): other left settings are set by default. (ten) the layout, text and graphics should be written horizontally from left to right. Text is always edited in columns. Handwriting must be clear and tidy, and it is forbidden to use variant characters, compound words and all non-standard simplified words. Don't use traditional Chinese characters unless necessary. (1 1) Header and footer: Set the header according to the material content. Footer: Set the page number and center it. Four binding undergraduate graduation design (thesis) binding adopts the cover binding of undergraduate graduation design (thesis) of Xingzhi College of Zhejiang Normal University. Literature and history

Undergraduate graduation project (thesis) (Song 1 bold center) (20 10) (Song 1 bold center) Title: Major: (full name) Student name: Student number: (full name) Instructor: Title: Co-tutor: Title: Completion time: 20. Grades: (Grade 5) (Unless otherwise specified, the contents of this page are all in Song Ti III) (italics are tips, please delete italics when writing papers) (all printed on A4 paper, with margins of 2.8 cm from top to bottom and 3.0 cm from left) The text of graduation design (thesis) of Xingzhi College of Zhejiang Normal University is in Song Ti III, with bold in the center.

Song Xiao er, bold center table of contents.

Name of professional student (student number) No.5 Instructor: Name (professional title) Note: English title, subtitle, author, instructor, abstract, keywords, etc. They are all Times New Roman fonts, and the font size, leading and trailing spaces of paragraphs and other requirements are completely consistent with their Chinese formats. The principle of good faith is an extremely important principle in General Principles of Civil Law of People's Republic of China (PRC). This paper systematically discusses and analyzes the principle of good faith. .................. Keywords: honesty and credit; Credibility crisis; Lack of completeness: bold semicolons are separated by bold number five; "There is no punctuation at the end.

Principle of good faith Bold No.2 Bold No.5 * * * * * Director * * * * * * * No.4 (School of Law, Politics and Economics, Zhejiang Normal University) Abstract: Acquisition in good faith is a very important principle in the General Principles of Civil Law of People's Republic of China (PRC). Accuracy of good faith No.5 Song Ti Xiao No.4 Bold No.5.

Foreword Song No.4 Bold General Principles of People's Republic of China (PRC) Civil Law1On April 2, 986, China promulgated .................................. I. The concept of the principle of good faith Song No.4 Bold principle of good faith, referred to as the principle of good faith, It refers to ........................................................... First of all, it shows the moral standards that all market participants should follow in market activities ... The fixed value of line spacing is 18~22, and the fourth place is bold. 2. The principle of good faith is the legalization of moral standards [1]. Refer to example notes, superscript

A monograph [1] Zhang Jingtai was collected from the beginning and end pages of references. The function and evaluation of the principle of good faith [J]. Journal of Hebei University of Political Science and Law Management Edition, 2002, (05): 12 ~ 23. [2] Ma Junju, Yu Yanman. On Civil Law [M]. Beijing: Law Press. 1998:100 ~150. ending with a dot [3] Zhang Ming. On the principle of good faith [C]. * * * Proceedings of academic seminar, * * * seminar, Beijing, 2000. Beijing: * * Publishing House, 2000.

Song Xiaoer, be bold in the middle.