Thoughts after visiting the garment factory (1)
On the morning of May 8th, the new employees of xxx Service Group, led by the company's business manager, visited and studied in the garment factory.
Manager Sun of the factory warmly received us, and under her leadership, we began to visit the garment processing production line. First of all, we came to the fabric warehouse, and all kinds of fabrics piled up like mountains. Under the explanation of manager Sun, the characteristics of the fabric are very distinct. Every kind of fabric looks similar, from the single-sided velvet and terry velvet of sportswear and running clothes in autumn and winter, to the rib cloth and slub sweat cloth of T-shirts in spring and summer, and then to the soft and comfortable coral velvet. Due to different knitting methods, there will be different textures and uses, and the feel and impression are obviously different.
In the cutting workshop with the highest technical requirements for workers, the mechanics skillfully operate the cloth cutting machine on the cloth cutting table, and the action is very light and fast. Every knife goes down, only cutting on the printing line on the cardboard, without any negligence. Once there is a slight deviation, these dozens of pieces of cloth will be completely scrapped. This not only requires workers to have rich production knowledge, but also needs to accumulate and practice repeatedly in their daily work in order to achieve accurate skills in operating the cloth cutting machine.
Next, we visited the production line. Production steps are simplified and all links are closely coordinated. We walked along the production line, and piles of cloth magically turned into beautiful clothes. The final processes of the production line are ironing group, packaging group and needle inspection group. After careful ironing, packaging and careful safety needle inspection, the finished clothes can be packed and shipped out of the factory, flowing to shops all over the world and coming to consumers.
I benefited a lot from this visit to the factory. Not only learned a lot of production knowledge, but also intuitively understood the production process. The visit to the factory operation made me realize a lot of truth.
First, respect knowledge and strengthen scientific management. In the cutting workshop, Manager Sun told us that many factories still draw patterns by hand, but their factories have improved their technology, drawing patterns by computer and printing them directly on printing paper, which not only improves work efficiency, but also minimizes waste through computer calculation. Enterprises can't increase profits only by increasing investment and expanding scale, especially in today's global financial crisis. Enterprises want to survive in the crisis, relying on advanced knowledge and modern operation, fully carry out production research, apply technological innovation and develop new products; Strengthen scientific management, reduce material consumption to improve production efficiency, thereby improving the comparative advantage of enterprises and making enterprises invincible in the competition.
Second, pay attention to teamwork. On the assembly line of the factory, we intuitively feel the importance of cooperation. Each operator only needs to complete a part of his familiar work, and these steps are connected with each other, which is the whole process of clothing production. After working for one year, I found that the completion of any project in the company requires the cooperation of all departments and between superiors and subordinates. What is needed in daily work is also cooperation. Work is not a stage for individuality. Only by actively integrating individuals into the collective can we promote the development of the company's cause. No matter how good an employee is, it is impossible to complete all the work independently. Therefore, at work, he must learn to be tolerant, cooperate and make up for his position, so as to become a qualified member of the team. Everyone must be in the same boat, and no one can emphasize their uniqueness, let alone take care of themselves and others.
Third, details determine success or failure. The operation of the assembly line must not be sloppy, and every detail will be related to the qualified rate of garments. Our work is the same, we must be careful and pay attention to every detail, and we must use scientific theoretical knowledge to guide our behavior. You know, a miss is a thousand miles away. At work, the whole business may make mistakes because of my negligence, so from the moment I entered the company, the leaders have been emphasizing serious work, reducing mistakes and trying not to make mistakes. This is to educate us to develop good work habits, nip in the bud, and don't cause losses to the team because of our own mistakes.
Thoughts on Visiting Garment Factory (2)
We entered the workshop on the fourth floor under the guidance of the staff. At first, we saw some designers drawing samples there. I felt ashamed when we saw the picture on the table. Every working procedure on the drawing is very clear, precise and definite. Every detail of the plain clothes on the drawing is marked, leaving no trace. The board room is the place where the sample clothes are made, and it is the first process for the designer's drawings to become reality. The production of sample clothes here is directly related to the mass-produced clothes, so it is necessary to meet certain standards before the sample clothes can be delivered to? Assembly line? Workshop for mass production. Of course, this workshop has a place to change the film (where there are problems in the clothes that need to be re-made), where various fabrics are used to make up the material and replace the unqualified fabrics on the clothes. This is a small processing workshop.
We saw the cutting machine, put the original computer typesetting drawings on this big cloth, and then cut the patterns on the drawings with the cutting machine. Hundreds of thousands of copies have been cut, saving a lot of effort. Computer typesetting is also very important, and typesetters should try their best to save the waste of cloth. The cut shape will reach a person's hand, and he will write the number on each piece of cloth with a pen, because the cloth of a garment must be the same, so as to avoid the color difference of the cloth on a garment (each garment has its own number).
There are three production lines on the fourth floor, including suits, trousers and casual clothes. Each production line is divided into three groups, and each person only does one process, which is different, and goes down the assembly line. This can speed up the workers and improve their efficiency. Practice makes perfect. Each machine has the function of automatic thread cutting, that is, after sewing, there is no need to use small scissors to cut the thread head, which saves a lot of time and improves efficiency. The sewing skills of employees are very high. The open thread of 0. 1 has been put in the workshop for a long time, and no stitching has been seen there. It is impossible at our present level.
Then I went to the workshop on the third floor, mainly knotting, shaping, packaging and post-processing. Of course, we saw ready-made clothes on the third floor. In the hands of workers, ordinary suits and jackets suddenly became energetic. Then I went to tidy up, which was the last round of clothes-experienced ready-made clothes, such as buttons, buttonholes, export heads, unqualified fabrics and so on. Once you have it, you should take it back to the repair shop for repair. Every dress has to go through experience. If you find something that needs to be revised, just post it? Arrow? , unified to modify. If there is no problem, you can take it for ironing, labeling and packaging. The workshop is very simple and tidy, and the label number is exquisite. The color and model of clothes are displayed on the label, so clothes should be arranged according to different prices, different models and different colors. When labeling, you can hurry up and don't make mistakes. You can leave the factory after packaging.
Our visit ended unexpectedly. A visit to the garment factory lit a fire in our hearts, which may be the desire to become a fashion designer. However, I know this is just the beginning, we still have a lot to learn and a long way to go. This visit seems to have planted a seed in my heart. Let time prove its growth.