What is the composition quality of Quality Month 1? The International Organization for Standardization (ISO) defines quality as the degree to which a set of inherent characteristics meet the requirements. Such an abstract definition is difficult for non-professionals to understand. In our actual work, there is an interesting phenomenon: the same tools, the same working methods and the same production environment, but the quality of the products detected is quite different. Why?
Different people have different opinions. I think: quality is an attitude.
Quality is an attitude, and the quality of products is in the hands of every employee. The guarantee of product quality needs our joint efforts. For quality, we should not only be "excited", but more importantly, "collective action". In our work, we should advocate the work style of unity, cooperation and selfless dedication, and emphasize the enhancement of internal cohesion. In order to improve the technical quality and practice, we have a master to take care of the apprentices, and the master teaches them by hand, and the apprentices study closely. Only when all our employees have excellent skills can we make our products impeccable.
Quality is an attitude, and the quality of products depends on the cognition of each employee. There is no small matter in quality and safety, and everything that should be done and must be done well is done seriously. With the same chemical reaction principle, why is there a gap between our chemical industry and advanced countries for decades? Besides the process, the attitude of the operator is very important. In the eyes of serious and responsible people, the concentration of 99.99% is 99.99%, and adding 0.0 1% or less is not enough, but it can be matched in the hands of perfunctory people. Although the figures in the operating specifications and technical requirements are impressive, they still can't attract enough attention. Imagine, can this attitude produce good products? Obviously not!
Quality is an attitude, and product quality is the foundation of enterprise survival. The guarantee of product quality requires us to regard ourselves as a member of the enterprise and deeply realize that we are a member of the enterprise, and the development of the enterprise can drive our development. At work, every subtle link requires employees' serious and dedicated work. If the work is not meticulous, the operation is not standardized, and the cleaning is not in place, it may cause quality accidents. A wisp of flying flowers, a defect and an carelessness are all trivial problems, but it is these details that determine success or failure. Zhang Ruimin, president of Haier, said, "What's not simple? It is not easy to do every simple little thing well. " Quality is closely related to every operation and inspection. As long as we strictly control the quality and strictly follow the operating procedures, we will certainly be able to prevent delays and nip in the bud. This requires us to take quality awareness to heart. Be strict with yourself at work and practice basic skills hard, starting with every joint and every round of cleaning.
Quality is an attitude, which is not only reflected in the operational level, but also in the management and implementation level. Zhang Ruimin angrily smashed the unqualified refrigerator, and with this attitude, "Haier" was put on the international stage, and the "Haier" brand was among the top 500 most valuable brands in the world in China. This attitude is the clear attitude of Haier's leadership towards quality. At that time, the message conveyed by this attitude to all Haier people and all customers was very clear and its value was immeasurable. Haier has developed from a collective enterprise on the verge of bankruptcy to such an influential enterprise. Who can deny the role of this attitude? Now everyone is talking about quality, everyone is talking about quality. It can be said that quality consciousness "blooms everywhere". Attitude is everything! Let us put the "heart" of quality into "action"!
If there is no first-line construction experience, when there is a quality problem, most people will think that the quality inspector has not properly closed it. In fact, this answer is one-sided! In fact, as we all know, the project is done by every front-line person, not by quality inspectors and departments. Therefore, frontline workers' awareness of quality responsibility should be improved, and the quality of the project should be deeply rooted in the hearts of every worker.
Training is the foundation and the first step to enhance the sense of responsibility. In the minds of most workers, construction is a task, and the extensive construction method formed for a long time is difficult to change for a while, leading to a lot of rectification and rework. The change of thought is a long process. First of all, the project department should organize quality training and education in a planned way, conduct targeted training and assessment on each working procedure for the operation team, clarify the responsibilities of each worker, watch relevant videos in the evening, and gradually form a quality concept.
Respect front-line workers and improve their sense of belonging. Every member of the project department is a participant in the project, and the center of gravity of the project department can be tilted to the front line, giving front-line workers enough care and respect and improving their sense of belonging. With a sense of belonging, workers will be strict with themselves and improve their quality, which is natural. Besides, if you give, you will get something in return. The project department can evaluate excellent construction teams and excellent employees through daily inspection, and issue corresponding rewards to form a virtuous circle.
Consciousness in the heart and quality in the hand. Quality should be grasped from the front line, and it is the first and most economical step to improve the quality responsibility consciousness of front-line workers. May the sense of responsibility for quality take root in everyone's heart in the near future; I hope that in one hundred years, our project can stand the test of time.
Quality is the foundation of doing things. If you don't do things seriously and have no quality, you will eventually harm others and yourself.
Quality should always be in your heart and mine. No matter what, be serious and have quality. If something goes wrong, we will bear it, and everyone will avoid it and the problem will not be solved. If you can fully realize your mistakes, the problem will be solved, but instead of making up later, it is better to start working seriously, so that you can not only help others, but also help yourself.
Let's look at a short story: an old carpenter is about to retire and says to his boss, "Boss, I want to leave the construction industry and go home to enjoy my family with my wife and children." Of course, the boss couldn't bear to leave his good worker, so he asked the old carpenter if he would like to build another house for him. The old carpenter agreed, but everyone could see that his heart was no longer working. When building a house, the carpenter used soft materials and did rough work. After the house was built, the boss handed the key to the old carpenter and said, "thank you for your efforts for so many years." This is a gift for you. " The old carpenter was surprised and ashamed. If he knew this was his house, how could he be like this? Now the old carpenter lives in a humble house. This story tells us that products are made for ourselves, the quality of details has improved, and so has life. You can build and operate at will. When you realize your situation one day, you are already in a quagmire, so face life with your heart and build your own house with your heart.
In a word, quality is the foundation of life. Only by putting quality first, being meticulous, striving for perfection and always maintaining a high-quality life can we create a better and better life!
Quality is created by our employees, not tested. To produce high-quality products, we need everyone's joint efforts and employees who control the details of each production link. Only when everyone has a good quality control can our products stand out in the fierce competition.
In the era of pursuing efficiency, quality should be the first. It turns out that the finished products and annealed steel products of our big stick branch factory are directly stacked on the annealing furnace for annealing. Although the efficiency is high, the hardness uniformity of the same package of steel after annealing is inconsistent, and the hardness difference at different positions is quite different, which affects the effect of customer's post-processing. In order to make the annealing hardness uniform, we have made the following improvements in the process: let the whole package of steel be scattered, and put a branch at equal distance on each layer to ensure the consistency of heating and cooling speed of each steel, so as to make the hardness of steel in the same furnace uniform, improve the use effect of customers and increase customer satisfaction.
In the face of quality, efficiency should also give way. Rolled round steel with specifications above φ 300 is easy to bend, and the bending is concentrated at the head. When the pressure is straightened, it is supported by two points and stressed by one point. The head is too short to bend in the blind area, which leads to poor straightening effect. Although the straightness of steel meets the requirements, it still has a certain curvature. Moreover, after straightening, dents will appear on the head of the steel bar, which will affect the appearance quality of the steel bar. In order to improve the straightness and surface quality of steel, the hot saw has a margin of ≥300mm at the head when cutting to length, which is more convenient for straightening in finishing, and the straightening indentation is also removed in later finishing. In this way, although a part of the yield is reduced, the overall quality of steel is improved and the continuous improvement of quality is realized.
To borrow an elder's words, in my eyes, there are only two kinds of steel, combination and disagreement. If you want to do it, you must do your best and the quality is 100%. Take this sentence out and share it with everyone, and encourage each of our employees to do their duty and control the quality in their hands.
Quality is an attitude, and the engineering quality is in the hands of every employee. As an engineering construction enterprise, the construction process and quality control are closely linked, and every subtle link needs to be taken seriously. A little carelessness will cause hidden dangers of accidents. In recent years, major engineering quality accidents have brought us painful lessons. As project builders who shoulder the responsibility of contributing to social infrastructure construction, what we need to do is to reflect on how to avoid similar accidents from happening again. Engineering construction is a very rigorous work. We can't be Mr. Almost at work. The front-line staff of the project are working hard, but this cannot be an excuse for our carelessness. We must carve it as our own artistic product, strive for perfection, have a good work style, and conduct a comprehensive inspection of the engineering quality in each process. Put forward and correct the potential and emerging problems in the construction process in time, follow up and check the construction process of special procedures all the time, ensure that each procedure is qualified, cooperate with the supervision technicians to patrol and solve various problems found, and make timely rectification to ensure that the construction quality of each link reaches the standard 100%.
Quality is an attitude, and the survival of enterprises is closely related to us. The negligence and contempt of any post in an engineering construction enterprise will affect the overall quality and even life of the project to varying degrees. We are all owners of enterprises, working for the development of enterprises, and enterprises provide us with an economic source of lazy survival. If you don't work hard, you will destroy the Great Wall, dig your own corner and cut your own path. In this sense, the fate of enterprises and ourselves is in our own hands. Grasping quality is to contribute to the enterprise, to grasp oneself and to grasp the future. Every employee should regard responsibility as Mount Tai. The details are in the process of perfection, and the responsibility is in every process. Let the idea that quality is the life of an enterprise be integrated into our work with our brains and hearts, let us strive for perfection on the road of construction, let time grind away excellent quality, and let enterprises be full of vitality and vitality on the road of sustainable development because of quality.
Quality is an attitude and a sense of responsibility. Quality is in my heart, and engineering quality is in the hands of every builder. Only a sense of responsibility and a rigorous working attitude can fundamentally ensure the quality of the project and enable enterprises to maintain their advantages in the fierce market competition. Attitude is everything! Let us put the "heart" of quality into "action"!
Quality is the foundation of everything. Without quality, talking about brand, development and competition are all empty talk. So where does quality come from?
How did our products come out? The answer is simple: design, production and manufacturing. Where is the quality? The answer is also very simple, in our products. So how does quality get into our products? Some people say that quality comes from inspection, which can distinguish between qualified and unqualified. Some people say that the quality you have checked or the quality you have not checked is already in the product, and it is impossible that the quality attribute of the untested product is gone. For example, idealism says that what you don't see doesn't exist, which is impossible. In this way, the answer is very clear Quality comes from the process of product design, production and manufacturing, and inspection plays a key role.
Quality seems to be controlled by people. I will discuss the viewpoint that quality is in my hands from the perspective of what I think is "people's sense of responsibility": no matter what the situation and conditions, human factors are the first, products are designed by people, people are the main body of management machines, and people decide quality, not machines. Quality is also a sense of responsibility. Therefore, it is necessary to improve the quality awareness of employees and infiltrate the quality of products into the hearts of every employee. Strict quality control, starting from now, starting from me, I am a quality inspector. If the product fails to pass the acceptance here, it will not flow to the next process. For example, if I go to work to continue production after taking over, the quality of the products will be problematic. After analysis, it is the product left in the machine in the last shift, not produced by me. But the responsibility should be mine and I should bear it. Why? Because I should check it! If I check, I will handle the unqualified products according to the procedure. This is a job that I didn't do well.
Quality is in my heart, emphasizing people's responsibility. If we all push the quality problem away, then how to survive is an attitude problem. It is an easy mistake to refuse to take personal responsibility. Effective managers and employees are responsible for the results.
No matter how beautiful an enterprise's product advertisement is, if there is no quality, its life will be very short, because it does not satisfy consumers and customers with its own quality, which is likely to harm consumers' interests, so consumers will naturally give up on it. In order to survive and develop, enterprises must first win by the quality of products or work and establish social credibility by high-quality products.
In a word, quality is the foundation of an enterprise, and quality is its life. The quality is 24 hours per day, 60 minutes per hour and 60 seconds per minute. Only by taking quality as the top priority of the whole enterprise's work, taking quality as the life of the enterprise, being meticulous and striving for perfection, and always maintaining high quality and efficiency, can enterprises be in an invincible position in the fierce competition.
The article of quality month 7 coincides with the arrival of quality month every year. I have been working for more than a year, and I want to put forward some humble opinions on quality. First of all, I ask myself, what is quality? Quality is a business card, a label of a project and a business card of a century-old project; Quality is the guarantee, the guarantee of the construction unit to the owner, and the guarantee of the enterprise to the country; Quality is also an umbrella, an umbrella for front-line workers and an umbrella for waiting for family members at home.
For quality, I think it is the quality of the material itself, the quality of manual processing, and the responsibility and foresight of the person who manages the implementation of quality. Thirdly, I will elaborate some of my own views.
First of all, we must control the quality of the material itself. First, ministry of materials and equipment and the laboratory strengthened material control, and technicians explained the material parameters in advance. In my subway project, according to the requirements of design drawings, the general support methods are arch frame, mesh and anchor spray. Some special sections have serious water leakage and need grouting. When I was working here, I also encountered such a problem. Sometimes many bureaus ask for materials from a processing factory, sometimes the materials are not so timely and occasionally the materials are unqualified. Including sand and gravel, sometimes the particle size and water content of stones are not satisfactory. Therefore, I hope that when the raw materials don't meet our requirements, but the construction production faces the dilemma of insufficient materials, ministry of materials and equipment and the comrades in the laboratory should stick to their true intentions, say no to the unqualified materials, and don't muddle through the waste of materials because they are eager for success. Second, comrades in the technical department should promptly disclose the materials and arch formwork. The cross section of subway construction should change according to different rock strata and different construction methods, so the arch formwork should also change frequently, so technicians should disclose to the processing department in advance, and then they can deliver it in advance. Correct, qualified, acceptance, unqualified, timely withdrawal, to ensure timely completion of support.
From the quality of a material itself to the quality of a project, manual processing is needed, so the quality of manual processing is also the most important. But it is also the most difficult point to grasp. After more than a year's work, it is found that the quality of workers is mixed. There are hard-working and conscientious workers, and there are also sloppy workers. But the quality of our project needs to be meticulous. Therefore, it is necessary to strengthen the control of workers. Therefore, the following suggestions are put forward. The Engineering Department and the Safety and Quality Department carry out profound and detailed disclosure, and some unfortunate videos due to quality problems can be shown to make workers awe. The Technical Department carries out technical disclosure, so that the team leader, support and shotcrete squad leader can understand the engineering quality requirements. The site is still the main battlefield of construction, and the survey team should measure it in time to inform the situation. On-site technicians and on-site supervisors should carefully monitor and observe the design requirements when applying for inspection, and immediately rectify the unqualified products, and the next process can only be carried out after the rectification is completed. After shotcreting, technicians should check the effect of shotcreting in time. If there is any leakage of reinforcement and spraying, it should be replenished immediately, otherwise the next process cannot be carried out. Although there will be quarrels with workers in this process, which will slow down the progress, after repeated strict requirements, the construction workers' inner requirements for work will also be subtly improved. I like a sentence very much, making Excellence a habit. In engineering, I hope this sentence will become the norm and the quality of the project will become the norm.
The last one is the responsibility and foresight of the person who manages the implementation of quality. In fact, this requirement runs through every link of the whole quality control. Here, I want to talk about foresight. An excellent technician should consider what to do in the next cycle. For example, one thing I experienced, when our shaft was excavated, there was water leakage on the side wall. Grouting was not done in time. At the same time, cross bracing shall be installed according to the design requirements. After several cycles of downward excavation, it was found that the leakage of the side wall did not stop. At that time, scaffolding was set up and grouting was carried out. During grouting, a cross brace was deformed, then it was removed and replaced, but it was reinstalled. In this case, I understand that work should be predictable. If grouting was done in time after excavation at that time, cross braces should be installed in time after grouting. Then the above situation will not occur when excavating downwards, and it will take a lot of time to set up scaffolding and replace supports afterwards, and the last time will not be saved. There are still quality problems if grouting is not carried out.
These are my views and suggestions on quality as a newcomer who has worked for one year. I will continue to study in the next process, hoping that the quality of the project will continue to improve, and then we will create one hundred years of projects and make our project quality world-famous.
Quality monthly essay 8 is to build quality strength, create a better life, a better quality life, focus on quality and safety, create a better life, build a high-quality brand, and jointly pour a monument to the times with users. Especially in our concrete enterprise, quality is the cornerstone of our survival, the bridge of our development and the strong backing of our brilliant and century-old enterprise.
The product of our enterprise is commercial concrete, and good quality means producing high-quality concrete. It involves people and products. The company is working hard to cultivate our quality awareness and quality level. Every employee must attach importance to quality and cultivate quality awareness. We usually pay attention to the quality and details of raw material inspection, such as whether the temperature and humidity before inspection meet the requirements, whether the inspection equipment works well, and the preparation of inspection instruments. The whole operation process must be carried out in accordance with national standards, and the quality of test and detection must be strictly controlled.
Quality is in my heart, and quality is controlled by people. If the products of an enterprise want to have quality, first of all, the personnel of the enterprise must talk about quality, put quality in their hearts and put quality into action. We should have a sense of responsibility, quality is done by practical actions, not by quality inspectors. We apply the concept of quality to the production process of products, do a good job in quality management and control, and produce high-quality products. Therefore, it is necessary to improve the sense of responsibility and work quality of employees.
In the mix design competition initiated by the company, we participated in all links and studied the mix design rules carefully. The concept of quality always runs through the theoretical mix design and the adjustment in the actual trial mixing process. Our aim is to design high-quality mix proportion and improve the durability, applicability and economy of concrete. In this competition, we improved our quality awareness and learned something about concrete quality control.
The company launched the "Quality Month" knowledge contest "Concrete Quality Knowledge Contest" to publicize the importance of production quality, further improve our quality knowledge and enhance quality awareness, let us interpret "quality" with our own wisdom, and let quality accompany our future work and life. The total quality management training courses organized by the company provide us with quality management methods, planning, implementation, inspection and analysis, people-oriented, people-centered quality management education, and cultivate self-quality awareness. Quality speaks with data.
The company organized a series of quality month activities to improve our quality level, enhance our quality awareness and deepen our quality concept. If the quality continues, our enterprise can go further and fly higher.
If you are a hard-working young man, with your own dreams and expectations for your girlfriend, enduring the double oppression of house prices and mother-in-law, after several years of hard work, you finally bought a house. But just when you moved in happily, you found that the room had quality problems. What are you thinking at this time? Yes, like a bolt from the blue! Simply calculate an account: if you can save 6.5438+million yuan a year and a suite needs 6.5438+million yuan, then once there is a quality problem in this room, it is likely that your ten-year efforts will be in vain. Life can be wasted for decades. This shows the importance of quality. And if you want to have excellent quality, you must have a rigorous and practical attitude.
Huawei's attitude is to attach importance to product quality and go up step by step; Nokia's attitude is to ignore product quality and gradually stagnate. So the former goes to glory and the latter to death. In the final analysis, the competition between the same industry is the competition of product quality. Having a correct attitude is the basis of ensuring product quality, and it is also the key for enterprises to stand out from the fierce competition.
Quality is an attitude, which depends on the sense of responsibility of every employee. If I become a quality inspector and continue to produce after taking over, there is something wrong with the quality of concrete. After analysis, it was produced in the last shift, but the responsibility should be mine. Why? Because I should check it! At this time, we are responsible for our mistakes. If there are quality problems, we will pass the buck. So, how do enterprises survive? Refusing to take responsibility is a common problem of people. A responsible employee should be responsible for the result of the matter.
Quality is an attitude, which depends on each employee's cognition. Compare the company to a big machine, then we are small parts. In my opinion, no matter what the type and nature of work, as long as you do your job well, it will help improve the quality of the company's products. For example, in our technical system, you are arranged to go to the construction site to keep digging. Do you go to see every car? Will you go to see it regardless of the hot sun or the cold? This is the question of whether you play a good role as a part of yourself. For example, when raw materials such as sand and gravel enter the station, I believe everyone will go and see how its quality is. But when the quality of many cars in front is stable, will you go to see the next car? On the evening of September 17, we pulled a load of gravel from Chunyu Station. Because the gravel of this supplier was relatively stable before, I came up with the idea of signing the contract directly without looking at the materials.
However, considering that it was night, it was difficult to check whether there was any quality problem with the gravel, so I went to see it. The light of the mobile phone is very weak, but what I saw surprised me. It should be 5-5-31.5 mm gravel, mixed with many large stones with a particle size of more than 50mm, and some are even as big as fists. I can't imagine what will happen after this batch of gravel is used to produce pumped concrete, ranging from a fine for blocking pipes to a big impact on the company's image and damage its reputation. I'm glad I didn't cause serious consequences because of my carelessness. But it makes me more alert and I can't relax in the future.
High-rise buildings and bridges can survive the wind and rain, and the competitiveness of enterprises is getting stronger and stronger. This is quality! The stable development of enterprises and individuals is the dream of every employee, but the reality is that there are hundreds of concrete mixing stations in a city and many mixing stations in the same project, and the competition is fierce in reality.
The scenery in Rongcheng is very beautiful, and the sky in Spring City is very blue, which can be an ornament on our dream pursuit. But whether our dreams can be realized depends on whether our attitude is rigorous and the quality of our products is excellent. Otherwise, dreams will eventually become fantasies and reality will become more cruel. In this era of "the situation in the world gives rise to our generation, and the current situation in the rivers and lakes urges our generation", let us work hard for the improvement of the company's product quality and the development of the company and ourselves!
At present, the meaning of "quality" is not only product quality and service quality, but also covers all aspects of our work, life and study. It is said that "quality is the foundation of enterprise development", which also requires us to clearly understand what "foundation" includes, not only to strengthen grassroots construction and basic management, but to let all participants know which part of the foundation they belong to. Encourage them to think about how to consolidate their foundation.
"Thinking determines the way out, thinking determines action". We must build our own beautiful homeland, not by words or hands. Be sure to have ideas and standards, define the goals of each step, and learn to think.
Safety is the primary task of enterprise development, and the status of quality is also rising year by year, which can be said to go hand in hand with safety. When we are fighting the tough battle of "increasing reserves, stabilizing production and increasing efficiency" in oil fields, we should seriously think about how to emancipate our minds and broaden our thinking to reduce costs, and also think about what methods and measures to take to get the maximum profit, so as to get rid of our current passive situation. The role of quality is self-evident. Our HSE management system includes quality management. Quality management has been standardized in oil fields, but we must put an end to "fence" and formalization, which requires our quality management to be practical, hierarchical, post-oriented, detailed rather than general. The improvement of quality management will not only improve our work level and oil and gas output, but also play an active role in maintaining social stability and improving employees' family life.
Building a harmonious society requires too many people's efforts. How can castles in the air be stable? We must thoroughly consolidate the "foundation" of quality and safety, so as not to erase the previous efforts of more than 20 years, and to ensure that the scientific, technological, green and harmonious building we built can stand.
No sooner had the essay "Quality Month" of 1 1 entered the door of September than steel mills responded to the company's call and launched 4 1 Quality Month nationwide. As soon as you enter the refining platform of the steel plant production site, you can see that "strict and meticulous quality assurance, Excellence and promotion of development" and "all staff attach importance to quality and build the brand of Suzhou Iron and Steel Co., Ltd." flashed on the big screen, but the consciousness of demanding higher product quality was printed in the minds of every steel plant employee.
Walking into the refining area, which is the key area of product quality, we can hear the roar of electrodes when the site is electrified. In the main control room of the refining furnace, we can see that the refining furnace chief on duty is carefully calculating the amount of alloy added to the ladle. It can be clearly seen from the process card of on-site smelting that the internal control composition of the alloy added to the ladle by the refining furnace chief is only three spaces. Just the precise control degree of this composition is enough to prove the most remarkable characteristics of ordinary steel and special steel we are smelting now.
Walking out of the main control room and coming to the door of ladle furnace, we saw the operator on duty deoxidizing the slag surface of molten steel on the spot. Seeing that he skillfully shoveled out bags of deoxidizer from molten steel with a shovel and sprinkled it evenly into molten steel, he stood silently at the door of the smelting furnace, waiting for the order of the furnace chief in the main control room, following the principle of adding deoxidizer frequently and adding less at all times.
In just one hour, one furnace of refined high-quality molten steel was smelted. According to the requirements of the process card, the temperature of molten steel and the length of refining furnace obtained by the final temperature measurement can be accurate to less than 3 degrees. After the composition and temperature meet the requirements of the process card, the molten steel smelted in this furnace enters the next refining process-VD furnace.
The importance of product quality of each smelting station can be seen from the refining area of smelting alone. We can say that quality is the criterion, quality is loyalty, quality is responsibility and quality is the life of an enterprise. Without quality, integrity and market, enterprises will lose their potential for survival. For the better long-term development of the enterprise, any employee and any post of the enterprise should put quality and safety first. Let's work together to make our due contribution to the long-term development of the enterprise!