Find the screw of the fan, usually on the back or bottom of the shell, which can be unscrewed with a screwdriver. To remove the fan casing, generally pry it open or press the button gently with a screwdriver or flat plastic sheet, and be careful not to use too much force to avoid damaging the fan casing.
After opening the fan housing, you can take out the fan blades, usually by gently pulling them out. If you need to clean the inside of the fan, you can use tools such as a soft brush or a hair dryer to clean it. Be careful not to wet electrical components to avoid circuit failure.
When installing, reassemble the fan according to the reverse steps to ensure that the shell and screws are tight and avoid potential safety hazards. In a word, you need to be careful when disassembling the fan to avoid damaging the fan or causing safety accidents. If you are not clear about the operation steps, it is recommended to seek professional help.
Precautions for removing and cleaning the fan
1. Power off: Before disassembling and cleaning the fan, the power supply must be disconnected to ensure safety.
2. Disassembly: Disassemble the fan and correctly disassemble the cleaning fan according to the instructions.
3. Cleaning method: clean with clean water or warm water, or with special cleaning agent. You need to soak the fan in clear water or warm water for a period of time, and then gently scrub the fan with a soft brush or cloth. Be careful not to use too hard brush or too much force to avoid damaging the fan.
4. Drying: After cleaning, a drying fan is needed. Do not directly expose to the sun or use equipment such as hair dryer for drying.
5. Installation: After the fan is completely dry, install the fan correctly according to the instructions and reconnect the power supply.