Qualification of professional engineer in construction engineering
(Trial)
Article 1
The professional engineer of construction engineering must master the basic theory and professional technical knowledge of this major, as well as the standards, norms and procedures of this major, understand the relevant professional knowledge of this major, the latest technical situation and development trend, and be able to apply new technical achievements to work practice; Have rich professional and technical work experience, be able to solve complex and difficult problems in this major, make remarkable achievements, and obtain certain scientific and technological achievements or better achievements in technological innovation; Publicly publish and publish papers and works with a certain professional level; Have the ability to guide the work of junior professional and technical personnel; Proficient in using a foreign language to obtain information and conduct academic exchanges; Skillfully use computer technology to engage in professional and technical work; Have good professional ethics and professionalism.
Article 2 Scope of application
This condition is applicable to on-the-job professional and technical personnel engaged in production and technical management such as scientific research, design, construction, installation, decoration, inspection, supervision, cost and technical consultation of construction projects.
Article 3 Basic conditions
I. Ideological and political conditions
Abide by national laws and regulations, and have good professional ethics and professionalism. Pass the annual assessment during the current term.
Ii. qualifications and qualifications
(a) after obtaining a master's degree, he has obtained the qualification of assistant engineer and has been employed as an assistant engineer for more than 2 years.
(two) after obtaining a bachelor's degree or a bachelor's degree, he has obtained the qualification of assistant engineer and has been employed as an assistant engineer for more than 4 years.
(three) after obtaining a college degree and obtaining the qualification of assistant engineer, he has been employed as an assistant engineer for more than 5 years.
(four) do not have the above education (degree), obtain the qualification of assistant engineer, and be employed as an assistant engineer for more than 5 years; Or have the education (degree) specified in points (2) and (3) above, obtain the qualification of assistant engineer, and be employed as an assistant engineer for more than 3 years. If their achievements, papers and works meet the requirements of Article 7 of these conditions, they may make an exception to declare.
Third, foreign language conditions.
Except those who meet the exemption conditions, valid certificates issued by the government personnel department must be obtained. It's usually class B.
Article 4 Requirements for professional and technical work experience (ability and level)
Two, engaged in industrial and civil engineering research, design, construction, installation and other work of engineering and technical personnel, during the current position, shall meet one of the following conditions:
(a) as the main person to complete the whole process of design, construction or provincial (ministerial) scientific research projects of a branch of this major, including project selection, scheme determination, implementation process, achievement report, etc.
(two) as the main person in charge of the whole process of the design, construction or city (hall) level scientific research projects of a branch of this major.
(three) to participate in the formulation of provincial and ministerial technical standards, norms and procedures.
Five, engaged in building water supply and drainage engineering and fire engineering design, construction and scientific research work, during the current position, shall meet one of the following conditions:
(a) as a professional backbone to participate in the design and construction of 1 secondary projects or two or more tertiary projects.
(two) as the main person in charge to participate in the whole process of more than two provincial (ministerial) level scientific research projects.
(three) to participate in the formulation of provincial and ministerial technical standards, norms and procedures.
Six, engaged in heating engineering, air conditioning and artificial environment engineering, heating, refrigeration technology and other scientific research, design, construction work of engineering and technical personnel, during the current position, shall meet one of the following conditions:
(1) As the main finisher, he has participated in the whole process of two R&D projects above the city (hall) level or three horizontal R&D projects.
(two) as the main person in charge to complete more than three medium-sized industrial and civil building heating, ventilation, central air conditioning system design or construction technology.
(three) to participate in the formulation of provincial and ministerial technical standards, norms and procedures.
(four) as the main person, participated in the whole process of testing and evaluation work organized by the state authorized unit or the municipal (office) administrative unit for not less than 6 times.
Article 5 Conditions of performance
During the current post, one of the following conditions shall be met:
First, the city (Hall) level and above the main completion of scientific and technological achievements award-winning projects (subject to individual award-winning certificates).
Two, the city (Hall) level excellent design (excellent survey, excellent engineering) award-winning project is mainly completed. (Subject to individual award certificate or commendation document)
Three, such as research and development of new processes, new technologies, new products 1 above, the results reached the advanced level in the province, and were recognized by the professional authorities at or above the municipal level.
Four, responsible for the promotion and application of new technologies more than 2, and achieved greater social and economic benefits, in the local area (city), the system (province) has a greater impact, by the professional authorities at or above the municipal level identification and recognition.
Five, to solve more than two complex and difficult technical problems in design, construction and installation, the effect is remarkable, and has been recognized by the professional authorities at or above the municipal level.
Six, the application of advanced technology and experience at home and abroad in the design of construction projects, there are important innovations, and achieved social and economic benefits, recognized by the professional authorities at or above the municipal level.
Article 6 Conditions for Papers
During the current post, publishing academic papers (first author) and works with a certain professional level shall meet one of the following conditions:
He has published 1 professional works and written more than 20,000 words.
Two, published papers in professional journals at or above the provincial level 1 more.
Three, published more than 2 papers in municipal professional journals.
Four, in the municipal professional journals published papers 1 article, read the winning papers 1 article or more at the municipal (hall) level professional academic exchange meeting (with the award certificate and reading certificate).
Five, in the municipal professional journals published papers 1, and there are more than 1 special technical analysis (demonstration) report to solve complex technical problems, approved by the professional departments at or above the municipal level.
Six, in the municipal professional journals published papers 1 article, read papers 1 article in professional academic conferences at or above the provincial level (with a reading certificate).
Outside the seventh regulation.
I. Performance conditions
During the term of office, the following two conditions must be met:
(a) the main completion of the provincial (Ministry) third-class and municipal (Hall) second-class scientific and technological progress award-winning projects (subject to individual award-winning certificates).
(two) the provincial (ministerial) level outstanding design (excellent survey, excellent engineering) award above the second prize winning project (subject to the individual award certificate or commendation document).
(III) The technical backbone of the business has completed the scientific research, design and construction of major projects above the city (hall) level (subject to the projects determined by the municipal government and the hall), and its technical level has reached the advanced level in the province at that time, which has achieved great social and economic benefits, and has been appraised and recognized by the professional departments above the city level.
Second, the conditions of papers and works
During his current post, he has published an academic paper (the first author) with a certain professional level and publishing level, and has one of the following conditions:
Published professional works 1 article, with more than 40,000 words.
Two, published more than 2 papers in professional journals at or above the provincial level.
Three, published more than four papers in municipal professional journals.
Four, published two papers in municipal professional journals, and there are more than two special technical analysis (demonstration) reports to solve complex technical problems, which have been recognized by professional departments at or above the municipal level.
Article 8 Supplementary Provisions
First, the normal declaration personnel, according to the first, second, third, fourth, fifth and sixth conditions, and provide corresponding materials; Exception reporting personnel, according to the first, second, third, fourth and seventh conditions, and provide corresponding materials.
Two, exceptional personnel and reporting personnel also need to provide the following materials:
1 business autobiography, 1500 words, focusing on the work experience, ability, level and performance during the current position. The business autobiography shall be signed by the unit (the editing and talent exchange institutions also require the editors) and stamped with the official seal.
2, more than three peer experts (senior engineers) on the applicant's work ability, level and performance evaluation.
Qualification of senior engineer in construction engineering specialty
(Trial)
Article 1
Senior engineers of construction engineering specialty must systematically master the basic theory and professional technical knowledge of this specialty, master the standards, norms and regulations of this specialty, keep abreast of the latest technical situation and development trend at home and abroad, and apply new technical achievements to work practice; Have rich professional and technical work experience, be able to independently solve complex and difficult technical problems in this major, make remarkable achievements, and achieve good results in scientific and technological achievements or technological innovations with great value; Publicly publish and publish papers and works with high professional level; Have the ability to train professional and technical personnel and guide engineers; Proficient in using foreign languages to obtain information and conduct academic exchanges; Skillfully use computer technology to engage in professional and technical work; Have good professional ethics and professionalism.
Article 2 Scope of application
This condition is applicable to on-the-job professional and technical personnel engaged in production and technical management such as scientific research, design, construction, installation, decoration, inspection, supervision, cost and technical consultation of construction projects.
Article 3 Basic conditions
I. Ideological and political conditions
Abide by national laws and regulations, and have good professional ethics and professionalism. Pass the annual assessment during the current term.
Ii. qualifications and qualifications
Meet one of the following conditions:
(a) to obtain a doctorate, obtain the qualification of an engineer, and be employed as an engineer for more than 2 years.
(two) after obtaining a bachelor's degree or above, he has obtained the qualification of an engineer and been employed as an engineer for more than 5 years. Or obtain a bachelor's degree after obtaining a college degree, obtain an engineer qualification and be employed as an engineer for more than 7 years.
(three) do not have the above education (degree), obtain the qualification of engineer, and be employed as an engineer for more than 5 years; Or have the education (degree) specified in point (2) above, obtain the qualification of engineer, and be employed as an engineer for more than 3 years. If their achievements, papers and theses meet the requirements of Article 7 of these conditions, they can make an exception to declare.
Third, foreign language conditions.
Except those who meet the exemption conditions, valid certificates issued by the government personnel department must be obtained. Generally, it is level A. ..
Article 4 Requirements for professional and technical work experience (ability and level)
Two, engaged in industrial and civil engineering research, design, construction, installation and other work of engineering and technical personnel, during the current position, shall meet one of the following conditions:
(a) as the main person to participate in the completion of 2 provincial (ministerial) level scientific research projects, or provincial (ministerial) level scientific research projects 1 and 2 or more municipal (departmental) level scientific research projects.
(2) As a technical person in charge or a professional person in charge, he has undertaken two first-class and second-class projects or 1 or above, and participated in the whole process of project construction related to this professional branch.
(three) as the main technical person in charge, popularize and apply more than three new technologies, new processes and new products with high level.
(four) presided over or as a technical person in charge to participate in the provincial and ministerial level or as a compiler to participate in the formulation of national technical standards, norms and procedures.
Five, engaged in building water supply and drainage engineering and fire engineering design, construction and scientific research work, during the current position, shall meet one of the following conditions:
(1) served as the head of water supply and drainage specialty in two large or three medium-sized industrial and civil construction projects.
(two) as the main person in charge, played an important role in the design of two national key projects.
(three) presided over the completion of two provincial (ministerial) level scientific research projects or 1 provincial (ministerial) level scientific research projects and two listed (ministerial) level scientific research projects, and passed the appraisal of the provincial (ministerial) level business department.
(four) presided over or as a technical person in charge to participate in the provincial and ministerial level or as a compiler to participate in the formulation of national technical standards, norms and procedures.
Six, engaged in heating engineering, air conditioning and artificial environment engineering, heating, refrigeration technology and other scientific research, design, construction work of engineering and technical personnel, during the current position, shall meet one of the following conditions:
(a) as the main person in charge, participated in two provincial (ministerial) key scientific research and design projects, and presided over the whole process of two secondary projects.
(two) as the main person in charge, he has completed the design or construction technology of heating, ventilation and central air conditioning system for more than two large-scale industrial and civil construction projects.
(three) presided over the completion of not less than 8 inspection and evaluation work organized by the state authorized units or municipal (office) administrative units.
(four) presided over or as a technical person in charge to participate in the provincial and ministerial level or as a compiler to participate in the formulation of national technical standards, norms and procedures.
Article 5 Conditions of performance
During the current post, one of the following conditions shall be met:
First, the national, provincial (ministerial) level scientific and technological achievements award-winning projects are mainly completed, or the city (hall) level scientific and technological achievements award-winning projects are mainly completed (subject to the individual award certificate).
Two, the provincial (Ministry) level excellent design (excellent survey, excellent project) first and second prize project is mainly completed, or the city (hall) level excellent design (excellent survey, excellent project) first prize project is mainly completed (subject to personal award certificate or commendation document).
Three, as the main person to research and develop new technologies, new products 1 above, the results reached the advanced level in the province and approved by the professional authorities at or above the provincial level.
Four, as the main technical person in charge, the successful popularization and application of more than three new technologies and new processes with high level, and achieved great social and economic benefits, which have great influence in the province and have been recognized by professional departments at or above the provincial level.
Five, solve the design, construction and installation of complex technical problems that have not been solved for a long time, and the social and economic benefits are remarkable, which have been identified by the professional authorities at or above the provincial level.
Six, the application of advanced technology and experience at home and abroad in the design of construction projects, there are major innovations and breakthroughs, and achieved remarkable social and economic benefits, and approved and adopted by the competent departments at or above the provincial level.
Seven, the completion of two major projects or more than three medium-sized projects, the quality reached the provincial level of the main technical person in charge.
Article 6 Conditions for Papers
During his current post, he has one of the following conditions for publishing academic papers (the first author) and has a high professional level:
Published professional works 1 more than 50,000 words.
Two, published more than 2 papers in professional journals at or above the provincial level.
Iii. Publish papers 1 in professional journals at or above the provincial level, read more papers 1 at international academic conferences or read more than 2 papers at national academic conferences (all must have reading certificates).
Four, published papers 1 in professional journals at or above the provincial level, and read more than two award-winning papers at provincial academic conferences (with award-winning certificates and reading certificates).
Five, published papers 1 article in professional journals at or above the provincial level, and there are more than two high-level special technical analysis (demonstration) reports to solve complex technical problems, which have been identified and recognized by professional departments at or above the provincial level.
Outside the seventh regulation.
I. Performance conditions
During your current job, you must meet the following two conditions:
(a) people who enjoy subsidies from the State Council or the provincial government.
(two) the main person who won the national natural science award, the invention award and the scientific and technological progress award; Or the main person who won the provincial (ministerial) natural science award and scientific and technological progress award; Or the main person in charge of the national excellent design (excellent survey and excellent engineering) award; Or Luban Award Project Manager and Construction Director; Or the main person in charge of the first prize of the provincial (ministerial) level excellent design (excellent survey and excellent engineering) award; Or the main person who won the first prize of the city (hall) level scientific and technological progress award. (All are subject to the individual award certificate or commendation document)
(3) Directly presided over and completed the development, research, design and construction of major national or provincial (ministerial) projects (subject to the projects determined by the provincial people's government), and the technical level reached the domestic advanced level at that time, achieving great social and economic benefits, and was appraised and recognized by professional authorities at or above the provincial level.
Second, the conditions of papers and works
During his current post, he has one of the following conditions for publishing academic papers (the first author) and has a high professional level:
I. Independent publication of professional works 1 rest, with a total word count of more than 654.38+10,000 words.
Two, published more than 2 papers in professional journals at or above the national level.
Three, published more than four papers in provincial professional journals.
Four, published more than 2 papers in provincial professional journals, and there are more than 2 high-level special technical analysis (demonstration) reports to solve complex technical problems, which have been recognized by professional departments at or above the provincial level.
Article 8 Supplementary Provisions
First, the normal declaration personnel, according to the first, second, third, fourth, fifth and sixth conditions, and provide corresponding materials; Exception reporting personnel, according to the first, second, third, fourth and seventh conditions, and provide corresponding materials.
Two, exceptional personnel and reporting personnel also need to provide the following materials:
1 business autobiography, 1500 words, focusing on the work experience, ability, level and performance during the current position. The business autobiography shall be signed by the unit (the editing and talent exchange institutions also require the editors) and stamped with the official seal.
2, more than three peer experts (professor-level senior engineer) on the applicant's work ability, level and performance evaluation.