In the era of continuous progress, each of us may come into contact with job responsibilities. Any job responsibility is a combination of responsibility, power and obligation. How much power we have, how much responsibility we have, and how much we have to do. Any separation will cause problems. What job responsibilities have you been exposed to? The following are the job responsibilities of the production engineer that I sorted out for you. Welcome everyone to refer to it, I hope I can help you.

Job responsibilities of production engineer. Participate in the development and trial production of new products and the formulation of product quality plans.

2. Participate in solving quality problems in the process, track and confirm according to engineering inspection standards, and implement standardization.

3. Organize the quality review of existing products, and evaluate the conformity of product quality with engineering specifications, inspection standards and customer requirements.

4. Supervise the production process and inspection process in strict accordance with the procedures.

5. Be responsible for contacting customers and responding to customers' complaints about testing standards and measurement methods in time.

6. Participate in product quality planning in advance, implement and track product quality.

7. Responsible for quality management cost analysis.

8. Participate in public and 5S inspection.

Job responsibilities of production engineer 2 1. Under the leadership of the supervisor, be responsible for the development of new products and the preparation of process regulations for the improvement of old products. Ensure the integrity, correctness and unity of process documents.

2. Be responsible for the design of process tools for batch trial production of new products, improve the trial production report and related process data, and file and archive the process technical data. Participate in new product evaluation.

3. Be responsible for 5S management in the workshop.

4. Be responsible for the process and tooling training, job skills training and assessment of operators.

5, technicians should go deep into the production site, grasp the quality situation; Guide and urge the first-line production in the workshop to solve the technical problems in production in time and do a good job in process and technical services.

6, responsible for the production equipment filing, safe production operation and maintenance.

7. Responsible for the management of process tools, cutters and blades.

8. Be responsible for the formulation, inspection, diagnosis and implementation of ISO900 documents of this department.

9, responsible for handling other matters within the scope of production responsibilities.

10, complete the task assigned by the supervisor temporarily.

Responsibilities of production engineer: 3 1. Provide process and technical services at the manufacturing site.

2. Be responsible for the process guidance, management, supervision and technical service of the manufacturing production site.

3. Responsible for the preparation and preparation of CNC equipment manufacturing work instructions.

4. Responsible for the design, improvement, registration and warehousing of all manufacturing tools, as well as the backup of technical documents.

5. Be responsible for the preparation of NC equipment processing tools, including selection, receiving, sharpening, tool testing and monitoring.

6. Identify the process route changes in the production process.

7. Conduct on-site review on the recovery of nonconforming products in the production process of the branch factory.

8. Review and determine the technical route of new product development.

9. Be responsible for the quality statistics, report and analysis of the branch factory.

10. Complete other work arranged by the branch leaders.

Job responsibilities of production engineer 4 (1) guide and educate all engineering and technical personnel to conscientiously implement the laws, regulations, standards, rules and regulations and safety technical specifications of the state, industry and superiors on safety production, labor protection and environmental protection.

(two) in order to ensure the production safety and quality requirements of construction projects, the management, use, rewards and punishments of project engineering and technical personnel have the right to suggest.

(three) responsible for organizing the preparation of the project implementation construction organization design (including safety technical measures), special and special construction design and related safety technology implementation rules, and strictly implement them.

(4) Responsible for organizing acceptance, confirming the safety and stability of temporary construction facilities, reviewing various safety technical disclosure documents, and participating in on-site solution of possible safety technical problems in the first construction of the project or important subdivisional work.

(five) to assist in the safety technical training for employees; While making the first-level construction technical disclosure to the project engineering and technical personnel, operation team leader and full-time safety production supervision and management personnel, do a good job in safety technical disclosure, explain the safety technical operation procedures in the construction process, go deep into the construction site, and solve the safety technical problems in the construction and production process in time.

(six) before the implementation of new technologies, new processes, new materials and new equipment, we should seriously consider their safety and reliability and formulate construction safety precautions.

(seven) to urge and guide workers to carry out construction production in strict accordance with the safety operation rules, and have the right to order them to stop working and correct them in time if they violate the safety operation rules in construction production.

Job responsibilities of production engineer Article 5 The chief engineer is responsible for the specific leadership of mine safety technical work, and is responsible for the technical leadership of mine safety production. The main responsibilities are:

1, carry out the laws, regulations, guidelines and policies of the superior on safety production, and be responsible for organizing the formulation and implementation of mine safety technical rules and regulations.

2, regularly chaired a meeting of managers of all units and departments, analysis of mine safety production situation, study and solve safety technical problems.

3. While adopting new technologies and new processes, study and take protective measures; When designing and manufacturing new production equipment, there must be safety and health protection measures that meet the requirements; New construction projects should be designed, constructed and put into production at the same time as the main project, and the design review and completion acceptance should be well controlled.

4. Supervise the technical department to put forward safety technical requirements for the use, storage and transportation of new materials; Organize relevant departments to study and solve safety technical problems in the production process.

5, regularly arrange and check the work of the security department. Assist the mine manager to organize safety inspection, be responsible for making rectification plans for major hidden dangers found in the inspection, and organize relevant departments to implement them.

6, to participate in major accident investigation, and make technical appraisal.

7. Conduct regular safety technology education for employees, and conscientiously implement the "five simultaneities".

8. Have the right to refuse to carry out the instructions and opinions assigned by superiors that seriously endanger production safety.

9, responsible for organizing the preparation of mine disaster prevention safety technical measures and disaster prevention treatment plan, responsible for organizing the formulation of emergency rescue and disaster relief plans for major accidents.

Job responsibilities of production engineer 6 Under the leadership of the chief engineer, assist the chief engineer in his work, be in charge of ventilation safety technology, and be responsible for mine safety production technology.

1, implement the national guidelines, policies, regulations, decrees, instructions and decisions of local governments at all levels.

2, responsible for organizing the preparation of mine safety production technology development plan, annual plan and monthly and quarterly safety accident prevention measures.

3, responsible for the scientific management of ventilation safety equipment, facilities, instruments and meters, manage and make good use of ventilation safety equipment, facilities, instruments and meters, improve the utilization rate and intact rate, and give full play to its utility in mine safety production.

4, responsible for drafting and reviewing mine ventilation safety technical documents and related measures, to participate in the rescue of mine disasters and accidents, to participate in the tracing and analysis of major accidents, and put forward improvement measures.

5, responsible for organizing the inspection of the implementation of safety technical measures plan and mine disaster prevention and treatment plan, timely deal with major ventilation safety technical problems in daily production, and ensure the normal operation of mine safety production from the ventilation safety technology.

6, responsible for mine ventilation safety standardization work, formulate rules and regulations about ventilation safety, and is responsible for organizing the implementation. Participate in mine safety inspection and safety office meetings, often analyze the situation of mine safety production, grasp the accident dynamics, and urge relevant departments to put forward rectification measures for the identified safety hazards.

7. Put forward suggestions on the allocation, mobilization, rewards and punishments of ventilation safety engineering and technical personnel and senior technicians, timely stop illegal command, illegal operation, violation of "coal mine safety regulations", "operation regulations" and "operation regulations" in ventilation safety, trace all kinds of "one ventilation and three prevention" accidents, and put forward treatment opinions.

8. Organize to check the progress and usage of safety measures, and be responsible for organizing the acceptance of safety measures.

9, the auxiliary ambulance service business technical guidance. Responsible for the mine at least once a year against the wind drill.

10, once a major accident occurs in the mine, immediately rushed to the scene to assist the chief engineer in formulating and implementing the emergency rescue and disaster relief plan.

Job responsibilities of production engineer 7 Job responsibilities:

1. Cooperate with relevant technical departments to carry out scheme design and technical exchange in the early stage of the project.

2. Writing and implementation of technical agreements;

3. System structure design of specific projects, drawing of relevant drawings and technical documents.

4. Participate in project installation, debugging and technical guarantee.

5. Preparation of product/system manual;

6. Cooperate to solve major technical problems in production and R&D;

7. Be responsible for the standardization of the whole process of product design and appraisal;

Job requirements:

Bachelor degree or above in mechanical engineering, mechatronics, electrical, automation control, process equipment and control engineering (chemical machinery);

2. Have working experience in automation industry, and have some experience in pneumatic, mechanical transmission and mechanical design;

At least 3.5 years working experience as an electrical engineer in automatic packaging production line, including at least 3 years electrical design experience in automatic packaging production line;

4. Familiar with the design and application of product packaging production line;

5. Proficient in mechanical transmission mechanism design, electrical circuit design and packaging line design;

6. Experience in automatic production line design of packaging production line is preferred;

6. Proficient in autocad, Pro-E or solidwork and other related application software;

7. Have a good work attitude and sense of responsibility, and have a good sense of teamwork and communication skills;

8. Be able to adapt to travel in different places.

Job responsibilities of production engineer 8 Job responsibilities:

1, responsible for assisting the superior leaders to improve and optimize the production process and improve the refined management system of the production department;

2. Organize, promote, coordinate and guide lean related activities of all departments of the company;

3. Track and supervise the implementation and promotion of lean production in various departments and manufacturing teams within the company;

4, responsible for the diagnosis and analysis of the production site, found that "waste"; Make improvement plan, promote implementation and evaluate;

5. Be responsible for training the managers of all departments of the company in lean production.

Requirements:

1, major in mechanical or electromechanical, college degree or above;

2. More than 5 years of practical experience in the promotion and management of lean production in manufacturing industry;

3. Have good team spirit and good communication, organization and coordination skills;

4. Strong ability to identify various wastes and problems;

5. Strong on-site problem solving ability and improvement ability.

Job responsibilities of production engineer 9 1. Statistics of production yield, improvement of mass production quality of the company, guarantee of quality reaching standard and continuous improvement, continuous reduction of production loss and continuous improvement of yield;

2. Establish, implement and continuously improve the company's product quality management system, including but not limited to incoming inspection feedback form, maintenance problem feedback form, process inspection feedback form, production test feedback form, etc. , and improve the company's internal/external production process document management; Constantly update and improve the contents of the document;

3. Strengthen and arrange the maintenance and test management of the company's production department, and standardize the maintenance and test process; Formulate and improve the feedback form of maintenance problems, establish the traceability system of production problems, improve the management of corresponding material numbers and batches, strengthen the maintenance ability and system improvement of the company's products, and continuously improve and improve the production level of the process;

4. Clarify the quality requirements and supervise the outsourcing factory; Confirm the first product with the outsourcing, put forward analysis and countermeasures from time to time according to the test results of the production test engineer, urge the outsourcing to improve the production quality and strengthen the inspection and inspection of external consultation; Realize the traceability of product process;

5. Handle customer complaints and respond to the quality problems of business departments in time; Make relevant plans to solve quality hidden dangers in production; Issue an 8D report;

6. Improve and optimize the communication between departments: by contacting and coordinating relevant departments, grasp the internal and external situation of the production system, make timely adjustments according to the corresponding production operation plan and changes in the actual situation, promote the implementation of the plan, make full use of production resources, and deliver products to customers in time with good quality and quantity; Perform the duties of laboratory and maintenance area according to the company's 5S standard to ensure the clean environment.

Job responsibilities of production engineer 10 qualification

1, with knowledge of machining, electrician and electronics;

2. Familiar with the production process, assembly and fastening process of lamps and lanterns, and understand the common causes of lamps and lanterns process problems;

3. Understand process improvement and quality management, such as Q7, N7 and IE improvement;

4. Have good overall planning ability, communication and coordination ability, analytical ability and innovative thinking ability;

5. Excellent team leadership skills, able to effectively maintain team relationships;

6, familiar with lighting industry certification standards, computer skills;

7. Strong logical thinking ability; Able to work independently, be able to guide and train others.

Job responsibilities:

1) is responsible for promoting the process improvement of the department and the concrete implementation of the introduction of new processes and methods.

2) Organize the formulation of process management standards, establish a process improvement system, and continuously improve the level and ability of process management;

3) In the product scheme design stage, the safety, reliability and humanization of products and modules are realized through process design;

4) In the small batch trial production stage, verify the safety, reliability and humanization of products and modules, improve the process design and realize standardization;

5) In the mass production stage, the safety, reliability and humanization of products and modules are continuously improved through process design according to the work objectives and the gap with benchmark enterprises;

6) Organize the introduction of new process management methods and tools to improve the level of process control and quality assurance;

7) Monitor the action analysis process and narrow the action scope;

8) Supervise and guide the procedures and standards of employee skill evaluation, and promote the improvement of employee skills;

9) Monitor the production process to reduce production waste;

Job responsibilities of production engineer 1 1 Job responsibilities:

1, responsible for the overall planning and overall planning of mass production products PE;

2 responsible for the technical guidance, analysis, solution, prevention and control of abnormal problems in the whole process of small batch trial production and mass production of leading products;

3. Be responsible for improving the yield of production line, the first pass rate of products and the production efficiency;

4. Participate in new product introduction, BOM production and confirmation;

5. Be responsible for the first confirmation of daily production model, reorganization and design change;

6. Other related matters assigned by superiors.

Qualifications:

1, bachelor degree or above, major in automation and structural design;

2, 2 years or above working experience, familiar with lean production and on-site improvement experience;

3. Skillful use of various office software and Auto CAD drawing software;

4.IE has a solid professional foundation and strong ability to analyze problems;

5. Familiar with visual management and 5S management, and have certain communication and innovation ability;

Job responsibilities of production engineer 12 Job responsibilities:

1, responsible for process planning and process improvement of each production line and solving technical problems in the production process.

2. Draft the layout, flow chart, PFMEA, production work instruction and test work instruction of the new project.

3. Train the employees of the production department in the trial production stage.

4. Implement lean production, continuously shorten the production time of single product, keep the balance of each process, and improve production efficiency every year.

5. Strictly implement the company's rules and regulations, and fully implement the safety production and 5S management requirements.

6. Complete other tasks assigned by the production manager.

Job requirements:

1, more than two years working experience as process engineer or lean improvement in foreign companies, such as line balance and VSM.

2. Bachelor degree in electronics or machinery.

3. Good oral and written English.

4. Good computer skills, preferably experience in using Solidworks 3D software.

5. Be familiar with the assembly and manufacturing process, have the ability to design fixtures and debug all production equipment, and have experience in new product production.

6, familiar with air conditioning or water chiller production process is preferred.

7. Excellent result-oriented problem solving skills.

8. Experience in using ERP production modules.

Job responsibilities of production engineer 13 Job responsibilities:

1, responsible for the company's process technology and process management.

2. Make short-term and long-term development plans of process technology and technical organization measures.

3, preparation of product process documents, formulate material consumption process quota; Design process equipment according to process requirements, and be responsible for the verification and improvement of process tools; Design company and workshop process layout.

4. Solve problems related to production technology and equipment to reduce various production costs and expenses.

Requirements:

1, college degree or above in electronic related major;

2. At least 3-5 years experience in process, PE, IE and production introduction in power electronic product manufacturing industry;

3. Understand the welding, processing, SMT and assembly of electronic product components, and be familiar with the quality requirements of standardized production processes;

4. Familiar with the production process and flow of PCBA products;

5, understand the basic mechanical structure design, understand the basic knowledge of mechanical design and manufacturing;

6, will write production process standards, formulate work instructions;

7. Have practical analysis experience in process and KPI;

8. Received training in production and operation management, product knowledge, project management, production technology and basic knowledge of financial accounting;

9. You can use Proe or Soliworks software and skillfully use AutoCAD or other drawing software;

10, serious and responsible, dedicated, strong learning ability;

1 1, strong sense of responsibility, hard work and team spirit;

12, serious and responsible, dedicated, strong learning ability;

13, strong sense of responsibility, hard work and team spirit.

Job responsibilities of production engineer 14 Job requirements:

1, technical secondary school or above, majoring in mechatronics, holding electrician certificate;

2. Experienced in handling production line equipment problems, able to quickly locate and solve problems;

3, familiar with wave soldering, mounter, reflow soldering and other electronic manufacturing equipment maintenance;

4, adaptability and analytical ability, dealing with things with priorities.

Job description:

1, equipment maintenance plan, and organize the implementation;

2. Responsible for the maintenance, tracking and inspection of assembly line production equipment;

3. Responsible for the maintenance of equipment, instruments and tools;

4. Guide and participate in the transformation, installation and maintenance of equipment.

Job responsibilities of production engineer 15 Job responsibilities:

1. Under the leadership of the department head, be fully responsible for the equipment management, maintenance, maintenance and repair in each region.

2. Be responsible for formulating and implementing the regular inspection and maintenance plan of facilities and equipment.

3. Implement the equipment inspection system, and inspect and maintain all kinds of equipment in the workshop according to the requirements of daily inspection, monthly inspection, annual inspection and inspection. Deal with the equipment operation failure in time to ensure the equipment intact rate.

4. Responsible for the planning, receiving, storage and use of equipment and spare parts.

5. Assist the workshop and relevant departments to implement, formulate and rectify various safety systems.

6. Timely convey, carry out and implement the instructions of superiors about production and relevant rules, regulations and standards.

7. Try to study the repair technology, analyze the cause of the failure, summarize the wear law of the equipment joint, and guide the equipment operators to improve and perfect the equipment operation and maintenance methods.

Job responsibilities of production engineer 16 Job responsibilities:

1, responsible for establishing and improving the annual maintenance plan of the company's mechanical equipment and the implementation and evaluation of technical transformation of the equipment.

2, the preparation of mechanical equipment operation procedures; Management and Control of Wearable Parts of Equipment

3. Be responsible for the daily inspection, maintenance and troubleshooting of the company's mechanical equipment.

4. Be responsible for the induction training and assessment of machine operators.

5, responsible for the safety supervision of production equipment.

6, responsible for the company's water and electricity management.

7. Complete other tasks assigned by superiors.

Requirements:

1 with at least 1 years experience in manufacturing or maintenance engineering, and must hold an electrician operation certificate.

2. Understand the management of mechanical equipment in rubber production industry.

Knowledge of mechanical drawing and PLC is preferred.

Job responsibilities of production engineer 17 1, responsible for the identification, implementation, execution and enforcement of applicable standards, and actively carry out technical quality education.

2, strict construction management, responsible for technical quality management, organization of technical exchanges, technical innovation, analysis of technical and economic achievements, summarize the technical quality work throughout the year.

3. Guide quality assurance activities and organize engineering quality inspection and evaluation; Hold the company's quality analysis meeting regularly, conduct quality statistical analysis, deal with quality problems, sum up construction experience, and promote the application and development of "three new" technologies.

4, audit unit engineering construction organization design, construction scheme, special work instruction and verify the implementation effect.

5, responsible for the management of engineering excellence, responsible for external contact of technical activities.

6. The chief engineer is fully responsible for all approved construction organization designs and schemes. If there is a problem with the scheme, the chief engineer has an unshirkable responsibility. 1 0,000 yuan or less will be punished by 20%, 10% or less, and 5% or more. In case of heavy losses, the company manager's office will decide to change posts or.

;