2
Job responsibilities:
Job responsibilities:
1. Mainly responsible for the management of SMT equipment engineers, proposing work plans and objectives for subordinates and urging them to complete, and establishing and managing equipment maintenance plans and inspection systems.
1. Mainly responsible for the work plans and objectives of SMT equipment engineers, managers and subordinates and urging them to complete them, and the establishment and management of equipment maintenance plans and inspection systems.
2. Write standard operating instructions for equipment maintenance to reduce equipment maintenance time and improve production efficiency.
Compile standard operation instructions for equipment maintenance, reduce equipment maintenance time and improve production efficiency.
3. Optimize the equipment maintenance process, reduce the maintenance time by 50% and prolong the service life of the machine.
Optimize the equipment maintenance process, reduce the maintenance time by 50% and prolong the service life of the machine.
4. Familiar with PLC program editing and optimization, simple CAD and Protel drawing, and master the software upgrade of automation equipment.
4. Familiar with PLC programming and optimization, simple CAD and Protel graphics, and master the software upgrade of automation equipment.
foreman
Male foreman
2009.07-20 10.05
2009.07-20 10.05
Working place:
Working place:
Yantai
Yantai
Number of subordinates:
Subordinate number:
five
five
Job responsibilities:
Job responsibilities:
1. Responsible for trial production of new products (Sony mobile phones, PS4, PS3, PS VITA, etc.). ), according to the process requirements, collect the summary of trial production problems (for example, 0 1005 components are thrown badly, 0.4pitch BGA is printed badly, etc. ), and put forward improvement scheme for smooth mass production;
1. Be responsible for the trial production of new products (Sony mobile, PS4, PS3, PS Vita), collect the summary of the problems in the trial production process according to the technical requirements of the trial production (such as the poor printing of 0 1005 component casting and poo r 0.4pitch BGA), and propose improvement schemes for the smooth production;
2. Formulate production instructions, process documents and other documents, and verify the implementation contents and results of the documents.
2. Formulate production instructions, process documents and other documents, and verify the contents and results of document implementation.
3. Setting, debugging and optimizing the temperature parameters of the reflow oven;
3. Setting, debugging and optimization of reflux furnace parameters;
4. Monthly, quarterly and annual maintenance of equipment and replacement of waste parts (including printing machine, reflow oven and mounter);
4. Maintain the equipment monthly, quarterly and annually and replace scrapped parts (including printing machine, reflow oven and mounter);
5. Troubleshooting of equipment, work arrangement and technical guidance of technicians;
5. Troubleshooting of equipment and technical guidance of technicians;
6. Summarize the work regularly every month and give feedback on the progress of the work.
6. Summarize the work every month and give feedback on the work progress.
Project experience
Project experience
Maintenance and utilization of scrapped servo motor
Maintenance and utilization of scrapped servo motor
20 13.03 till now
20 13.03- Up to now
Project title:
Project release:
represent
head
Project description:
Project description:
As the servo motor of this brand has reached its maximum service life, the supplier will no longer provide free substitutes. However, the unit price of the motor is high, and replacing it with a new one will undoubtedly increase the cost. So I tried to repair the servo motor myself.
As the brand servo motor has reached its maximum service life, the supplier does not provide free substitutes. However, the unit price of the motor is high, and replacing it with a new one will undoubtedly increase the cost. So try to maintain the servo motor.
Project responsibilities:
Project responsibilities:
1, disassemble and repair the scrapped motor again, reinstall the repaired servo motor on the corresponding machine, and make a good tracking record. 2. Analyze and summarize relevant experience, and establish and improve the maintenance process. 3. Spread horizontally, copy and extend the service life of relevant important equipment parts.
1, disassemble and repair the scrapped motor, and reinstall the repaired servo motor on the corresponding machine and keep track of it. 2. Analyze and summarize relevant experience, and establish and improve the maintenance process. 3. Expand horizontally, and copy important equipment parts and extend their service life.
Project performance:
Project performance:
1, after maintenance, the motor has been running safely for more than 9000 hours, directly saving the department nearly 1.5 million yuan.
1, the repaired motor has been running safely for more than 9,000 hours, which directly saves the department nearly150,000 yuan.
2. The improvement results of this project have been promoted throughout the company and praised by department leaders.
2. The improvement of the project has been promoted throughout the company and rewarded by the competent department.
Improvement of scanning method to prevent bar code from losing.
Improvement of scanning for preventing bar code leakage
20 12.03-20 12.04
20 12.03-20 12.04
Project title:
Project release:
Overall responsibility
chief person in charge
Project description:
Project description:
Introducing SFC(ShopFlow Control), that is, workshop control system, requires a lot of bar code management, but there will be bar codes or missed scanning on the PCB placed in the workstation. This directly leads to the inaccuracy of SFC system data, causing great inconvenience and hidden dangers to health management and customers.
SFC (Control ShopFlow) is an application program in the workshop control system where bar code management is widely used, but there will be no bar code or missed scanning when the PCB board is put into the workstation. This will directly lead to inaccurate system data of CSRC, which will cause great inconvenience and potential risks to students and customers.
Project responsibilities:
Project responsibilities:
Complete the modification of track PLC software program and the improvement of hardware equipment of front and rear machines within 3 weeks, so as to achieve the purpose that when there is no bar code or missing scanning of PCB, the front machine will stop supplying board and the scanner will automatically give an alarm.
Within three weeks, the tracking and modification of PLC software program and the improvement of hardware equipment before and after the machine were completed, and the PCB board was scanned without bar code or omission, and the board and scanner were automatically alerted when the machine stopped.
Project performance:
Project performance:
1, on the basis of not buying new equipment, the automatic alarm function of the scanner is independently completed, and the PLC program of the plate feeder and the process track is modified, so that if the plate feeder stops supplying plates when the scanning is missed, the process track stops running, the signal light flashes and the buzzer gives an alarm.
1, on the basis of purchasing new equipment, the automatic alarm function is independently scanned, and the transmitter and process tracking PLC program are modified. If the missed scanning transmitter stops as a board, the track stops running and the light flashing buzzer alarms.
2. It has removed great obstacles for the overall introduction of the follow-up system.
2. It has removed a huge obstacle for the overall introduction of the follow-up system.