Question 1: How to run a badminton court? First, choose a location:

Near 1., near residential areas or university campuses, badminton population is abundant.

2. Convenient transportation,

3. The area of the arena is commensurate with the investment scale of the arena.

4, reasonable layout, pay attention to keep a distance with other sports venues, to avoid vicious competition.

Followed by operation.

1. Formulate various management systems of the stadium.

2, the implementation of personnel training,

3. System operation,

4, according to the problems in the operation, timely correct and adjust the system,

5. Pay attention to the promotion of the arena and various preferential measures.

Question 2: What are the procedures for opening a badminton court? Handle site construction, construction, project acceptance, fire acceptance and industrial and commercial registration.

Question 3: What certificates do I need to take to open a badminton court? A certificate requires an ID card, a bank account number and a source of funds. City hall, industry and commerce, taxation, fire protection and other one-stop processing. These are relatively easy to handle.

There should be a contact in the kick-off hall.

The cost of site renovation is basically 30,000-40,000 yuan, with four sites. It is strongly recommended that you use a plastic floor, which is inexpensive, durable and looks high-grade and practical.

The market prospect is very good. The daily income is about 1500. The net profit of (four venues) is about 1000 yuan.

Question 4: How much start-up capital does it take to open a badminton court? What should I pay attention to? 1. See how big a badminton court and how many courts you want to build. For example, 10 hand. The size of the standard badminton court is13.4m X 6. 1 m. The area of all venues will exceed 800 square meters, including rest areas, toilets and service desks. , which is almost 1 0,000 square meters. Then decorate the top, the ground can be laid as required, floor glue, floor, floor and so on. Procurement of venue lighting and sports equipment. Almost 560 thousand, etc.

In addition, you have to consider whether the venue is rented or bought directly, and the cost is different. Generally, it is rented more. You need to consider the local consumption level and venue rental schedule. Calculate how long it takes to return to the original cost and the utilization rate of the site. There will also be off-season and peak season.

Question 5: What should I pay attention to when opening a badminton court? It's a good idea to open a badminton court, and the problem of venue is a big problem. Now many cities have some idle warehouses that can be rented as venues. But there are two key problems: there cannot be too many columns in the warehouse; And there must be certain requirements for height. As long as these two conditions are met, it can be rented. The size of the venue should be selected after the market survey of sports groups. Generally, 10 to 15 venues are enough. After the problem of the site is solved, you can start to decorate the site. Badminton hall decoration has two key points: one is the ground, and the other is the lighting. Floors are generally made of two materials: wooden floors and plastic floors. The advantage of wooden floor is that it is relatively cheap and the overall cost is low. But the disadvantages are also obvious: poor motion texture and high follow-up maintenance cost. If you play ball on the wooden floor, you will feel uncomfortable when you push the floor, and the wooden floor is easy to wear and loosen after a period of use. But considering the cost, there are still many operators who choose wooden floors. Plastic flooring is closer to the level of professional courses, and its only drawback is the price. This needs to be selected according to the level and consumption ability of consumer groups. Some operators set up some plastic venues in a stadium to meet high-level needs, which is also a method that can be used for reference. Lighting is an important facility in badminton court. According to the requirements, the badminton court should be shadowless, that is to say, all angles need light projection to prevent dead ends of light. Generally, 400-watt high-pressure sodium lamps are used in the stadium, and 8 lamps in a venue can meet the requirements. It is best to use high-pressure sodium lamps and mercury lamps to make the lights look softer.

The most important hardware requirements are solved, and the remaining software problems are relatively easy. Badminton halls are relatively easy to manage, and most of them adopt membership system or club system. It is essential to stabilize a group of fixed consumers by collecting members. At the same time, it is necessary to contact several coaches (either full-time or full-time, but mainly * * *) and organize library training courses and other activities, which can increase income and further attract popularity. It is also an essential way to hold competitions regularly or irregularly to attract unit competitions.

Question 6: How to run a badminton court? It's a good idea to open a badminton court now, and the problem of venue is a big problem. Now many cities have some idle warehouses that can be rented as venues. But there are two key problems: there cannot be too many columns in the warehouse; And there must be certain requirements for height. As long as these two conditions are met, it can be rented. The size of the venue should be selected after the market survey of sports groups. Generally, 10 to 15 venues are enough. After the problem of the site is solved, you can start to decorate the site. Badminton hall decoration has two key points: one is the ground, and the other is the lighting. Floors are generally made of two materials: wooden floors and plastic floors. The advantage of wooden floor is that it is relatively cheap and the overall cost is low. But the disadvantages are also obvious: poor motion texture and high follow-up maintenance cost. If you play ball on the wooden floor, you will feel uncomfortable when you push the floor, and the wooden floor is easy to wear and loosen after a period of use. But considering the cost, there are still many operators who choose wooden floors. Plastic flooring is closer to the level of professional courses, and its only drawback is the price. This needs to be selected according to the level and consumption ability of consumer groups. Some operators set up some plastic venues in a stadium to meet high-level needs, which is also a method that can be used for reference. Lighting is an important facility in badminton court. According to the requirements, the badminton court should be shadowless, that is to say, all angles need light projection to prevent dead ends of light. Generally, 400-watt high-pressure sodium lamps are used in the stadium, and 8 lamps in a venue can meet the requirements. It is best to use high-pressure sodium lamps and mercury lamps to make the lights look softer. The most important hardware requirements are solved, and the remaining software problems are relatively easy. Badminton halls are relatively easy to manage, and most of them adopt membership system or club system. It is essential to stabilize a group of fixed consumers by collecting members. At the same time, it is necessary to contact several coaches (either full-time or full-time, but mainly * * *) and organize library training courses and other activities, which can increase income and further attract popularity. It is also an essential way to hold competitions regularly or irregularly to attract unit competitions. There are six to ten cashiers, floor managers, cleaners and equipment salesmen. As for funds, first of all, the venue fee is an important expenditure, which is slightly different in different cities. Take the area of ten venues as an example, the rent is 20,000/month, and the venue decoration cost is about 200,000. Together with other facilities, the initial investment is between 400,000 and 500,000. Take the half-year rent here as an example. The monthly operating cost is around 30 thousand, of course, there are also differences between cities.

Question 7: What are the requirements for opening a badminton court? How to deal with it? The first step of the installation process of sports floor: laying alignment stitches.

Step 2: Check the calibration seam.

Step 3: Put on the connecting tape (1/2).

Step 4: attach the connecting tape (all)

Fixed installation method

A, local fixed cleaning the ground. Tile and sew the sports floor. Brush 15cm glue on the inner side of the edge of the floor gap. Used for local bonding. Standard for fixing badminton court with double filling glue

Badminton court is a rectangular court with a length of 13.40m, a width of 6. 10m for doubles and 5. 18m for singles. The line width of each line on the court is 4cm, measured from the outer edge of the line. It is best to draw the boundary of the court with white, yellow or other easily recognizable colors. According to the regulations of international competitions, the minimum height of the whole stadium is 9 meters. There must be no beams or other obstacles within this height, and there must be no obstacles within 2 meters around the stadium. There must be a distance of at least 2 meters between any two parallel courses. The walls around the stadium should be dark and there should be no wind.

Badminton net standard

The badminton net is 6 6. 10/0m long and 76cm wide. It is made of high-quality dark natural or man-made fibers. Mesh size is between15-20mm. The upper edge of the net should be sewn with a 75-wide double-layer white cloth (folded in half), and a thin steel rope or nylon rope should pass through the interlayer and be firmly hung between the two net posts. The standard net should be brown or grass green. Net post height1.55m. Whether it is singles or doubles, the two net posts should stand at the midpoint of the sideline of the doubles field. In the official competition, the upper edge of the middle part of the net must be 1.524 meters above the ground, and the height of both ends of the net must be 1.55 meters. The two ends of the net must be tightly tied to the net post, and there can be no gap in the middle.

Sample drawing of popular litchi pattern PVC floor

Pvc coil

Suitable for multi-functional gymnasiums, its superior adaptability, durability, waterproof and anti-skid performance and firmness fully meet the competition requirements. The products are shaped in blocks, simple to lay, easy to maintain and convenient to collect, and their excellent quality is the first choice for many professional badminton teams and gymnasiums to compete or train.

Three-layer structure: the surface layer is woven. The middle layer is 1000D glass fiber reinforced layer, combined with the bottom layer of high elastic leather, so that athletes have better activity space; The bottom layer is a 3mm thick PVC foam buffer layer, and the bottom surface is 554-type grain, which is waterproof, mildewproof and antibacterial, with appropriate rebound, standard shock absorption and good sound insulation effect.

① color: mint green (other colors can be selected by customers).

② Size: length: 15m×7. 1m (composed of five pieces, each piece is 15m× 1.42m).

③ Thickness: 3.5mm, 4mm, 4.5mm and other specifications.

1, adaptability:

This product is suitable for any flat floor (such as cement floor, marble, water mill floor, wood floor, auditorium, indoor and so on). ), especially multi-functional venues.

2. firmness:

The bottom of the foam layer is treated with 544-type grain, which can exhaust the air inside when the field is unfolded with a reasonable weight, forming a vacuum, which is more adhesive and stable during the movement.

3. Comfort:

After special treatment, the surface of the venue is consistent with the brightness of the lights, and will not absorb light and reflect glare, which can better protect the athletes' eyes and avoid fatigue. The total thickness is 4mm, and the foam bottom layer is used as the buffer layer, which has better shock absorption and elasticity, effectively reduces the impact force of athletes' legs, makes their feet feel comfortable, better avoids sports injuries and improves the level of athletes.

4. Durability and wear resistance

The site is made of high-quality PVC material, and the surface layer is specially treated to improve the service life of the floor.

5, simple installation

The product is a one-piece model, which has two installation methods: movable and fixed, and the installation is convenient and simple.

6. Easy to maintain

The surface layer of PVC has the ability to repel external pollution, such as surface pollution, which can be used to clean mops and clean water scrubbing. Key dirt can be cleaned with neutral detergent.

7, moistureproof, anti-slip, mildew, antibacterial

The textured surface and reasonable friction coefficient fully ensure the skid resistance of the skater and better prevent the ground from getting wet due to sweat. PVC has been specially treated, which has anti-mildew and anti-bacterial functions.

All the floors are covered with glue. Glue it to the seam ... >>

Question 8: How much does it cost to open a badminton court? Hello, friend, now I forward my friend's experience in building a museum to you, hoping to help you, thank you:

The following are basically fixed investments:

1. Floor: 7000-30000 per floor.

2. Decoration: including lighting, a venue costs about 5,000 yuan.

3. Maintenance: including daily cleaning and maintenance, about10-one day in 20 yuan.

The following are variable costs:

1. The height is over 9 meters. The location of different cities is different, and the price difference can be different.

Chanda! !

2. Labor cost: In some places, it is only a few hundred dollars, which is much higher in Shanghai.

3. Supporting facilities: such as bathing \ parking lot ... This is based on grade.

note:

1. Actual utilization rate of a slightly better stadium (the ratio of the stadium area to the total stadium area).

Generally below 70%.

2. For fans, although the hardware of the arena is very important, the friendship and sports atmosphere between golfers are also very important factors. These things can't be obtained with money, but they can bring you hidden benefits beyond imagination.

Question 9: The annual income of opening a badminton hall depends on your consumption level there!

If it is per square meter 10 yuan per month, then the rent is 15000 yuan. Plus electricity and labor.

Badminton court 30 yuan daily 10 hour, * * 2400 yuan; Table tennis court per hour 15 yuan, one day 10 hour, * * 750 yuan.

Calculated according to the utilization rate of 60%, the daily income is 1890 yuan. There is about 40 thousand gross profit every month.

Profits from selling drinks, gadgets and equipment can cover labor costs and utilities.

These are all estimates, mainly the passenger flow and consumption level.

Question 10: What are the procedures for opening an indoor badminton court? The procedures for opening indoor badminton courts are as follows:

First, the first step to open a gym is to apply for a business license with personal application materials to the Cultural and Sports Bureau. The indoor badminton court also belongs to the gymnasium and needs to apply for a business license.

Nail 2: According to the relevant provisions of the Regulations on Hygiene Management in Public Places, business units in public places need to obtain the Hygiene Permit from the health department before they can apply to the administrative department for industry and commerce for registration and obtain a business license. If the badminton court belongs to a public place, it shall apply for the name pre-approval in the industrial and commercial department, obtain the relevant pre-approval from the health department with the name pre-approval notice, and apply for the business license with the relevant registration materials.

III. Bring the above documents to the local industrial and commercial department for application >, in which application > submission:

1, application for industrial and commercial registration of individual industrial and commercial households signed by the operator;

2. A copy of the ID card of the operator;

3. Certificate of use of business premises.

4. If there are items in the business scope for application for registration that must be approved by laws, administrative regulations and the State Council decisions, a copy of the relevant license certificate or approval document shall be submitted.

5. If an agent is entrusted, the certificate of entrusted agent signed by the operator and a copy of the ID card of entrusted agent shall also be submitted.