Current location - Education and Training Encyclopedia - Education and training - B2: What does the road test formula mean?
B2: What does the road test formula mean?
Step 1-6 is the work that must be completed before the body moves. "Seven-speed lifting and stopping" means that when the car is in the first gear, the clutch cannot be fully lifted, and it should be in a semi-linkage state to prevent the clutch from being lifted too hard and the power is insufficient to stall.

"Eight-speed-up" means that in the first gear, when the clutch is lifted, it is in a semi-linkage state, so that Xiangqian Che can roll. As long as the wheel starts to roll for almost two turns, you can step on the clutch, put in second gear, loosen the clutch (nine-speed rise) and lightly step on the accelerator. Finally, remember to turn off the left turn signal after driving into the driveway.

Road driving (subject 3)-road or simulation site, real car. The exams are all electronic eye monitoring and traffic police exams, and the road test is fairer. Since the implementation of the new traffic regulations of 20 13 and 10, items such as using lights, turning left and right and crossing crosswalks have been added to the examination. After the road test, the theoretical test of safe and civilized driving knowledge was added, which is different from subject one in that the picture analysis and judgment were added. There are 50 questions in the exam, each with 2 points. 100 out of 100, 90 or above is qualified.

Extended data:

Matters needing attention in the training process:

1, put the gear first and then release the handbrake;

2. Turn on the left turn signal for 3s and then start it. When starting, you can't hit the direction immediately;

3. Observe the left and right situation through the rearview mirror, drive slowly into the driveway and turn off the turn signal switch;

4. Start quickly and smoothly, without stalling, rushing, slipping, slipping back or idling at high speed;

5, if the engine flameout, immediately according to the correct operation method to start again;

6. Hold the steering wheel with both hands immediately after shifting gears;

7. Quickly shift to second gear after entering the lane, and hold the steering wheel with both hands quickly after shifting.

References:

Subject 3-Baidu Encyclopedia